F4 Help list not showing values when a BEx 7x workbook is refreshed

Hello All,
Hope you are doing good. I have a very peculiar behaviour with F4 functionality of a variable while refreshing a workbook and thus requesting for your help.
The workbook contains two queries. Both of these queries contains a common variable (of common characteristic).
Info_Provider
Query_Name
Characteristic_Name
Variable_Name
Multi_Provider_1
Query1
Char1
Var1
Multi_Provider_2
Query2
Char1
Var1
When Query1 and Query2 are refreshed individually, the variable Var1 (basically a plant variable) shows the help list values.
But when the workbook is refreshed (that's when both the queries gets executed together with a common variable screen) and
upon clicking the help list of the variable Var1 doesn't show any values.
Additional Info:
1. Both the variables are configured to show data from Master table.
2. The same set up works fine in 3x and also for other similar variables.
Has anybody come across of this situation? If so, what is the issue and what was the solution?
Pls share.
Thank you.
Lohith

We recently had a similar issue with a variable... turns out the RSR_VARIABLE_F4_RESTRICT_BADI BADI was activated for this variable (and the code was no longer "valid" with the current situation).
You may want to check whether you have that BADI activated.

Similar Messages

Y-axis Does not show values when exported to excel

Hi,
We are facing trouble while showing Y-axis values when report is exported to excel. On report Y-axis is shown properly however when we export it to excel only 1 value is shown with arrow mark(=>).
If we will right click Y axis, we can see all data exported in "Select Data". If we select Y-axis, and change axis properties to automatic, we can see Y-axis values on excel.
Now, is there any property setting which will show all the data on Y-axis instead of showing up single value with arrow?

Thanks for your reply. I tried it closing all sheets and exporting, however result doesn't change. There is an aggregate table we are querying to which holds almost 20k records. Right now I have observed this with 3 reports. In one of the report I am using Horizontal chart. In that report there is issue with X-axis.
e.g.
Band
1000<= |
             |
             |________________________________
              A                     B                  C                D

Help topics not showing up when clicked

For some reason none of the help topics will show up now when I click on them. I click on help, type in my question, get some links and when I click on them it closes the help window but nothing else pops up. Do I need to reinstall or is there some option that I turned off by accident?

Take a look at this http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS3716

PLS HELP: Video not showing up when inserting into timeline

hi everyone:
I recorded DV footage into FCP6. I have the DV footage opened in viewer and I set the in and out points. I drag the viewer footage into the timeline. But only the audio shows up in the time line.
How do I enable it so video can be inserted again?
I did some research and I'm aware there is the v1, a1, a2 on the left side of the timeline bar. If you disconnect v1, a1, or a2 it won't import into timeline on insert. However, even though I have v1 connected to v1 the video still won't show.
May someone help? This project is time sensitive.
Thanks ahead of time.

hey Capt,
It everything was recorded properly. Video and audio was captured while doing log and capture.
I was ediiting and I could insert video and audio files fine. Then I just created a new sequence and now it only inserts audio not video. I tried to insert video in my previous sequences that had video but now video can't be inserted either.
Did I hit some sort of key on the keyboard by accident that disabled the video insert?
Yes the v1 is connected to v1, it is both snapped together when I import video so I don't understand why FCP is not importing video from my sequence, unless it's a bug?!

A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

Did you tap "Show older backups" on the Choose Backup screen (see image below)?

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

I have a new iphone that is not showing up when I attempt to sync to itunes

I have a new iphone that is not showing up when I attempt to sync with itunes

Windows or Mac?
iOS: Device not recognized in iTunes for Windows
iPhone: Device not recognized in iTunes for Mac OS X
Robert, if you are using a Windows based computer, often disabling anti virus software and turning off the Firewall on the PC can help.
iTunes for Windows: Troubleshooting security software issues

Contact choice list not showing up on dial screen

I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

Our illustrator files are not showing up when uploaded to creative cloud.

Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

Hi My Ipod Touch Is Not Synching when i plug it in to laptop and its not showing up , when i try to manualy sync its not available

and its not showing up , when i try to manualy sync its not available, before whenever i plugged it into the lap top it would automatically sync any help please ?

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

Preferred Vendor serch help does not retrieve values

Hi,
SRM 5.0, Classic scenario
I have successfully replicated the Vendors. But I don't see the vendors in the "search help" when I create a SC.
It seems to me that I have implement the OSS note 845883. Can someone please confirm it.
With regards,
Pranav

Hi,
Apply this note and it should fix your problem:
Note 845883 - Preferred vendor search help does not retrieve values
Some other useful OSS notes ->
968251 BBPSC02:In source of supply preferred vendor not validated
1017288 SRM@ERP : no vendor replication into follow-on documents
831833 Search help for preferred vendor does not update data
980450 Shopping cart: search help for preferred vendor
860886 Incorrect search results for deleted 'Preferred Vendor'
711197 Preferred vendor not copied from template
739531 Preferred vendor/service agent must not be changeable
733899 Complete shopping cart: Preferred vendor disappears
634794 Preferred vendor: partner not found
726102 Performance in vendor search help
647760 Shopping cart: Preferred vendor / partner not
BR,
Disha.
<b>Pls reward points for useful answers.</b>

One calendar view does not show up when configure calendar overlay in sharepoint 2010

I created 5 views for a calendar and wanted to create a calendar overlay to show all 5 views.
Events 1
Events 2
Events 3
Events 4
Other events
but one view named "Other events" is not showing up when selecting view from "calendar" list.. (only the other 4 views are shown)
I checked that the view is created correctly and listed in views section in list settings.
Don't know why ?
Appreciate any advice

Hi,
According to your post, my understanding is that one of your calendar view didn’t display when configured the calendar overlay.
Was the “other events” view created by the Calendar View format?
You can only select the view created by the Calendar view format when you configure the calendar overlay.
I had tested with five view as your description, they are all the calendar views, and all the views could display when I configured the calendar overlay as below.
You can recreate a new view or a new calendar, then check whether it works.
There is an article about creating Calendar Overlay, you can check with it.
http://deannaschneider.wordpress.com/2011/09/28/calendar-overlay-a-simple-sharepoint-2010-ootb-master-calendar/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

F4 Help list not showing values when a BEx 7x workbook is refreshed

Similar Messages

Maybe you are looking for