F4 help on date field on screen
Hi ,
I created a screen using dialog programming . I have a date field there which is defined as
zscreenfield-zdate.
The format for this field in Element list is DATS .
How do i get a drop down on the date field on the screen .
Please advise
Thanks !
Edited by: Hari G Krishna on Mar 5, 2008 4:20 PM
Hi there,
In your custom table, for the date field use the dataelement "STRMN",, that should automatically gives you the search help for the date.
let me know if you have further queries,
<REMOVED BY MODERATOR>
Thanks-
Rahul
Edited by: Alvaro Tejada Galindo on Mar 5, 2008 4:32 PM
Similar Messages
-
F4 help for date field on screen painter
Hi ,
I created a screen using dialog programming . I have a date field there which is defined as
itab-date.
The format for this field in Element list is DATS .
How do i get a drop down on the date field on the screen .
Please advise
Thanks !In Report u have to add,
TYPES: BEGIN OF TY_F4HELP,
ENAME TYPE PA0001-ENAME,
PERNR TYPE PA0001-PERNR,
END OF TY_F4HELP.
Data: IT_F4HELP TYPE STANDARD TABLE OF TY_F4HELP WITH HEADER LINE.
*Begin of add F4 in Parameter field Ename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_ENAME.
DATA: IT_RETURN_TAB TYPE ddshretval OCCURS 0 WITH HEADER LINE . " Return table for F4 help
SELECT DISTINCT ename pernr
FROM PA0001
INTO TABLE IT_F4HELP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'ENAME'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_F4HELP
RETURN_TAB = it_return_tab
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
READ TABLE it_return_tab INDEX 1.
IF SY-SUBRC <> 0.
ENDIF.
IF sy-subrc = 0.
MOVE it_return_tab-fieldval TO P_ename.
ENDIF.
CLEAR: it_return_tab.
*End of add F4 in Parameter field Ename. -
HOW to ADD F4 help to a field on SCREEN (MODULE POOL)
Hi,
How to add f4 help to a field in screen ..plz help
Regards,
SalehaHi Saleha,
In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'BKPF'
fieldname = 'BUKRS'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = progname
dynumb = dynnum
translate_to_upper = 'X'
TABLES
dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
FROM BKPF
INTO CORRESPONDING FIELDS OF TABLE it_doc1
WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BELNR'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_BELNR'
value_org = 'S'
TABLES
value_tab = it_doc1.
ENDMODULE. " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya. -
F4 ( Search Help ) for date field on the selection screen
Hi Freinds,
i have used WDR_SELECT_OPTIONS In my component, i have one date field on selection screen(BUDAT), for this date field i want seach help
this is my code
create a range table for Posting Date
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'BUDAT' ).
add Posting Date to the selection
wd_this->m_handler->add_selection_field( i_id = 'BUDAT'
i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = '??????'
I_DESCRIPTION = 'Posting Date'
it_result = lt_range_table ).
can any one help me
Thanks
Srinihi sarbjeet
i created search help in dictionary and i used that search help in my program, but still its now working , any other ideas
Thnx
srini -
Help for date field not working after upgrade
hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*& Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
T_FIELDS-FIELDNAME = 'PSOBKEY'.
T_FIELDS-TABNAME = 'ZPSPERMISOS'.
T_FIELDS-SELECTFLAG = 'X'.
APPEND T_FIELDS.
CLEAR T_FIELDS.
SELECT PSOBKEY FROM ZPSPERMISOS
INTO TABLE T_PCONT.
SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
CUCOL = 10
CUROW = 1
TABNAME = 'T_PCONT'
FIELDNAME = 'PCONT'
IMPORTING
SELECT_VALUE = P_P_CONT
TABLES
FIELDS = T_FIELDS
VALUETAB = T_VALUES.
ENDFORM. " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM -
hai,
in selection screen, i am having the date field as select-options.
if i give low value, it should automatically display the high value, how to do this.
thanks.Hi,
U can use AT SELECTION-SCREEN event as follows :
AT SELECTION-SCREEN on S_DATE
if not S_DATE-LOW is initial.
S_DATE-OPTION = 'BT'.
S_DATE-HIGH = SY-DATUM.
MODIFY S_DATE.
Endif.
This shud help u.
Regards,
Himanshu
Message was edited by:
Himanshu Aggarwal
Message was edited by:
Himanshu Aggarwal -
HI all,
I want to attach search help for a DATE field created in screen painter.
For PERNR, PREM is attached. Similarly what is the statndard search help name for DATE field?
Thanks,
Shanthi.Hi ,
Declare the date field as sy-datum ,
parameters : date type sy-datum .
This shud bring the standard search help for date .
Thanks ..Get back for any issues.
Anil -
F4 help for two fields in screen
hello,
I have two fields in my table control which need F4 help in the screen.
But one F4 search exit is implemented, but it populates only one field.
but, on clicking f4 for one field, it should populate both the fields together.
do help me with this issue...
Can POH in the screen populate up two fields together???Hi Krithika ,
In addition to checking up the export parameters for the Search healp you will have to define the Search Help attachment also. I'll paste the SAP Help Text below but in Simple terms
You Define a structure with the fields to be returned and define the screen elements based on that structure . So on selection the structure is returned with all values and the screen elements are in referance to structure so all values get posted in screen.
Here is the SAP HELP part
"" From SAP HELP
A search help attachment is an assignment of a search help to a table, structure or data element, causing the corresponding search help to be automatically used to describe the input help process at this field when an ABAP Dictionary field is used in a screen.
You can attach a search help as follows:
1. Attach a search help to a structure or table field: The attached search help is available for all screen fields that refer to the table or structure field. There must be an assignment between the interface parameters of the search help and the fields of the table or structure for this type of attachment. In the input help process, this assignment results in a value transport between the corresponding fields (if they are known at least to the module pool of the screen) and the search help parameters. As for the foreign key definition, you can assign nothing, a constant or any other field (which is then sought in the module pool) to indivdiual search help parameters.
2. Attach a search help to a table: The assigned search help is available for all screen fields for which the table is a check table. There must also be an assignment between the search help parameters and the key fields of the table for this type of assignment.
3. Attach a search help to a data element: The attached search help is available for all screen fields that refer to the data element. If the search help is attached to a data element, an export parameter of the search help must be assigned to the data element. If the user chooses a row of the hit list in the input help, the contents of this parameter are returned in the corresponding screen field. More than one value is not returned when a search help is attached to a data element.
The described attachments only take effect if the field was not yet assigned an input help in the screen definition. Such an assignment can be made with the mechanism PROCESS ON VALUE-REQUEST in the flow logic or by attaching a search help to the screen field in the attribute maintenance screen. A F4 help can also be assigned to the field in the flow logic by using VALUES or SELECT. In the latter case, the input help here behaves as if the table specified under SELECT were assigned to the field as check table.
If more than one of the described mechanisms compete in defining the input help method of a screen field, the first one named will take effect. If none of the described mechanisms is available, the domain fixed values of the field will be used for the input help if necessary. If the domain of the field has no fixed values but has data type DATS or TIMS, the input helps that are assigned to these types are used for the input help. Otherwise there will be no input help available for the field.
A search help attachment always belongs to the definition of the object to which the attachment is made (structure, table or data element). It is also maintained in the maintenance transaction for this object and transported with this object.
<b>REWARD IF USEFUL. It Works for me here..get back if any doubts.</b> -
Saerch help for Date field on Modal Dialog box
Hi ,
I have made a screen of Modal Dialog box type . I have one date field on that screen . I have given datatype datum to that field but the serch help for that field is not coming . There is no search help for that field .. Please help..
Thanks in advance....hi,
in the pop up box for that field just checjk whether the data type is date. -
Search Help error : Invalid field format Screen error
Hi All,
I have attached a search help to contract field for contract no and item number. (in my own screen developed in a report)
The search help picks up data and assigns it to the fields,
But after this when I click on any other button, I get error saying :
<b>Invalid Field Format (Screen Error) !!!</b>
Any pointers guys !!!
Warm Regards,
Girishscreen checks in abapautomatically checks for format of field when u enter data....i.e date, integer etc...the problem in this case is that when u seelct a value using the help it is filling a value which is not the correct format...so check for the data types and test it again...this is definitely the problem.
-
Help with Date Field properties
I have a problem setting properties for date field. I want date in mm/dd/yy format, that i am able to but I want something like this. When someone enters date as just numbers like 080708, it should automatically make it as 08/07/08.
I tried doing some setting but couldn't find any help appreciated.
thanksYou will need to adjust the validation patterns in the Value tab on the object palette. There are four patterns that you can play with (Display, Edit, Validation and Data). Each pattern will affect the field data at different times. To get access to the patterns click on the Validation Pattern...button. A new dialog will open up with the 4 patterns available to you. The display pattern is how the data will be shown on screen. The edit pattern is how the user will enter the data, the Validation pattern is how the field will be validated and the Data pattern is how the data will appear in the saved XML.
In your case you will want to set a disply pattern of DD/MM/YY and an edit pattern of DDMMYY. This will allow the user to enter 080708 or 08/07/08 and it will display 08/07/08 all of the time.
Hope that helps -
Search help for date field in Editable ALV
Hello Friends,
I am using editable alv using 'reuse_* '.
I have used date as input field. While creating fieldcatlog also i have declared dat as a mkpf-budat.
But i am not getting serach help for date in output.
Is it possible with reuse or i have to go by object oriented ?Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND' "<---- pass this
i_callback_top_of_page = 'TOP'
is_layout = it_layout
it_fieldcat = it_fcat
i_default = 'X'
i_save = 'A'
it_events = it_event
TABLES
t_outtab = it_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&DATA_SAVE'. "<-------check this
PERFORM save_data.
ENDCASE.
ENDFORM. "USER_COMMAND -
F4 help for Date field and Validation
Hi Friends,
I am new to BSP programming .I knew getting F4 help in normal ABAP.But i don't know in BSP .
I want simple steps to get F4 for a field on Page as well as date field .
and How to valid those entered dates.
Presently i am using length 10 character variable for DATE without F4 help and No validation.
I think you guys will help me out.
Thanks,
Venkat.OWelcome to SDN.
for F4 help with validation for dates you can use the following code.
<htmlb:inputField id = "wf_ad_date"
type = "date"
showHelp = "TRUE"
value = "<%= sy-datum %>"
visible = "true"
disabled = "false"
required = "true"
maxlength = "10"
size = "10"
doValidate = "true"
design = "standard" />
For other type of fields check out this weblog by Thomas Jung
<a href="/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30 Value Input Help Popups Version 3.0</a>
Regards
Raja -
hi all;
I was working on ESS Leave Request, i am using the standard program SAPMWS20000081H and the service template WS20000081.
Now in the EP view i am unable to get the F4 help for the date field 'Absence From' & 'Absence To'. i have checked the data element used it is 'DATS'.
How to get the F4 help in the view, please help me its of high priority.Hi, I can tell you what we have done. I can see that the original template displays the "Absence from" field this way :
<tr> <td>`SAP_TemplateEditableField("FromDay", fieldLabel=ABSENCEFROM030150.label, fieldLabelWidth="170", name="ABSENCEFROM030150", value=ABSENCEFROM030150, size="10", maxlength="10", marginTop=9, inspectionText=ABSENCEFROMDAY, align="",
required="", width="", onchange="update_checkn(this.SAP_value, this)" )` </td>
</tr>
We modified the template to display it like this :
<tr><td> `SAP_Field("ABSENCEFROM030150","ABSENCEFROM030150", DynproLabelWidth="170")` </td></tr>
We did the same for ABSENCETO040150. So you can play around with the template to generate the F4 button. ( Note that we also added the ~webgui parameter in the service file and set it to 1, this in order to generate the calendar ). Good luck ! -
How to add a search help for a field in Screen Personas?
I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin
Maybe you are looking for
-
We have to implement a module which is visualized as a Java process. A huge volume of transactions are expected to come in and these need to be processed at high speed(response time of 5 seconds or so). This module should be able to support non java
-
New X220 support dual external monitors with mini dock plus?
Hi, I need to purchase a new Lenovo laptop in urgent. But we need to make sure it support dual display to two external monitors. (VGA) My question is: (1) we plan to purchase with mini dock plus, it have two HDMI port. can it support two external mon
-
WD Java -BuiltIn Type or Simple Type expected
Hi, As part of ECC upgrade we reimported RFCs into WD from new ECC system. We have 6 DCs and created 6 separate activities. Except one activity, rest of all activities got activated and released. For one DC, I got error BuiltIn Type or Simple Type ex
-
when you log in the app store in china which has the slowest speed of downloading the apps! Apple needs to explain to us!
-
Incoming Payments - Default account in Payment Means tab Bank Transfer
Hi all, I want the G/L Account in Payment Means (Incoming payments) - tab Bank Transfer to be set by default. For OUTGOING payments this is set via G/L accounts determination but there is no such option for INCOMING payments (?). I tried by creating