F4 in WDA table : The Match Code Button appears 4 lines down

Hi,
I have a problem with the Match code Buttons.
In the FAQ of the WebDynproABAP Wiki ( https://wiki.sdn.sap.com/wiki/display/WDABAP/GeneralTechnicalAspects#GeneralTechnicalAspects-2.110),
I read something about displaced artefacts in Tables. So I tried with a simple table and I still have the problem.
Can someone help me ?
Thanks.
MAline

Hi!
Which Support Package has your system? SP11? I think the problem will be fixed with SP11.
kindly regards
Fößleitner Johann

Similar Messages

  • Match code button

    Hello all,
    I have a screen design in Screen Painter and a lot of fields in it.
    I've declared the fields in my program "type DBTABLE-DBFIELD" way and when I press F4 in the screen I get values available for search help. The problem is that the match-code button doesn't appear so the user could press it.
    What should I do?
    Thank you un advance,
    Diana

    double click on the screen element to display its properties
    then in program tab
    go to poss. entries key...select SHOW PERMANENTLY

  • How to find the match code ? what is matchcode : MARA-MTART checktable T134

    hi ALL,
    How to find the match code ? what is matchcode for MARA-MTART and the checktable is T134.
    How to use in select-options using match-code?
    Thanks in advance.
    Points will be rewarded

    Hi
    Hi goto SE11 and inside the table u will see search help
    click on Entry Search Help. there u see the name of the search help for each field.
    Use this Search Help H_T134 in parameters
    select-options: s_mtart for mara-mtart matchcode object H_T134.
    Thanks
    Shiva
    Message was edited by:
            Shivakumar Hosaganiger
    Message was edited by:
            Shivakumar Hosaganiger

  • In what table the trasaction codes has been stored?

    Can anybody please tell me that in which table the Transaction Codes are being stored?
    Regards,
    Subhasish

    Hi,
    TSTC SAP Transaction Codes
    TSTC_LOG SAP transaction codes
    TSTC_SM Control table SU22: Auth.obj.maint. for tr
    TSTC_SRT Assign Transaction Codes to Reports
    TSTCA Values for transaction code authorizations
    TSTCA_C Values for Transaction Code Authorizations
    TSTCC Additional Attributes for TSTC
    TSTCCLASS User Interface Classification for Transact
    TSTCP Parameters for Transactions
    TSTCRID
    TSTCT Transaction Code Texts
    Thanks
    Vikranth

  • In E-Business Tax - In which table the tax codes are stored?

    Hi All,
    I am new to Financials. I have a requirement in which I need to list all the TAX CODES pertaining to AP and AR. Kindly let me know in which table the tax codes are stored in E-Business Tax module. Also let me know how the tax is associated with the AP and AR modules. Is there any column in the table to identify whether the tax is for AP or AR?
    Regards,
    Ahmed.

    Hello Ahmed.
    I was not aware that you were talking about R12. The information i gave you concerns 11.5.10.2. Anyway, i checked the ETRM's for R12 and checked that the tables also exist in rel 12. This is an excerpt from R12 ETRM:
    TABLE: AP.AP_TAX_CODES_ALL
    Object Details
    Object Name: AP_TAX_CODES_ALL
    Object Type: TABLE
    Owner: AP
    FND Design Data: SQLAP.AP_TAX_CODES_ALL
    Subobject Name:
    Status: VALID
    AP_TAX_CODES_ALL contains information about the tax codes
    you define. You need one row for each tax code you
    want to use when entering invoices. When you enter
    invoices, you can use a list of values to select a tax code
    defined in this table. Your Oracle Payables
    application also uses TAX_RATE to calculate use tax
    when you enter a taxable amount for an invoice.
    This table corresponds to the Tax Codes window.
    Now you say that you cannot find the information into the tables. Are you working on a production instance. Are you sure that the taxes have already been defined?
    Octavio

  • How can we know the source code no.of lines

    hi guys!
    please help me, how can we check the source code(No. of lines)in program with out comments

    hi,
    Use this code. Replace with your program name with the text in bold. V_lines gives the no of lines of code excluding comments and as well blank lines.
    TYPES: BEGIN OF t_type,
             line(72),
           END OF t_type.
    DATA: program LIKE sy-repid
                     VALUE <b>'Z_ABC_INNER_JOIN'</b>,
          t TYPE STANDARD TABLE OF t_type WITH HEADER LINE.
    DATA: v_lines TYPE i.
    READ REPORT program INTO t.
    IF sy-subrc =0.
      LOOP AT t.
        IF t+0(1) = '*' OR t IS INITIAL.
          DELETE t INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
      DESCRIBE TABLE t LINES v_lines.
    ENDIF.
    WRITE : v_lines.
    Regards,
    Sailaja.

  • I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

  • Phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

    phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

    First you can try to force reboot your phone.  To do this:
    1. Hold down the sleep/wake button and home button simultaneously.
    2. Let go when the Apple logo appears and the iPhone is booting up.
    If that doesn't work, you might need to hook the phone up to your computer and do a full restore through iTunes.

  • Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

    Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

    Doing those doesn't turn off your phone?
    As stated hold down the top button only until you see the red slider to power off your phone.
    If that doesn't work then take it to Apple and see what they say.

  • How to add the Match code object for the requisitioner field in TCODE ME51N

    Hi,
    How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
    Please  do the needful to me.
    Regards
    Rajesh

    don't you think that posting your question to a microsoft developer site would be more efficient?
    regards,
    anton

  • One of my apps disappeared as an icon! When I double tapped my home button it showed up at the bottom of the page. When I held my finger the red edit button appeared on app and I hit it! App is gone. Can't redownload as shows installed. Help!

    One of my apps has disappeared from my screen! I tried double tapping home button and the app showed up in the icon bar. I tapped and held the app and the red edit box appeared in left corner of app. I then hit the red button and the app went away. I tried to redownload but the app store shows as a purchased and installed app. Not sure how to recapture the app. Help

    You did't delete it. It's still there. You just deleted it from your history (a handy thing, 'cause it drains battery with what you would call RAM-usage). Swipe from screen to screen to find it. The only thing you might have lost, is any unsaved data in it (depending on tha kind of app it was e.g. Pages). It is the equivalent of quitting the application on a computer.

  • I BOUGHT LIGHTROOM 5 IN LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMBER WITH THE REDEMPTION CODE BUT APPEARS AN ERROR. MY PC IS WINDOWS 8. COULD SOMEBODY HELP ME?

    I BOUGHT LIGHTROOM 5 IN BEST BUY LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMER WITH THE REDEMPTION CODE FROM THE BOX, BUT APPEARS AN ERROR. MY PC IS WINDOWS 8, COULD SOMEBODY HELP ME??

    I don't know that you can purchase Adobe software in the US for installing and using outside of the US.
    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Can I control when the Review Quiz button appears?

    The project I'm working on uses the e-mail results function to send scores to a database.  After sending scores, the user needs to be able to review their answers.    The problem is I don't see a way to make the Review button's appearance dependent on another action (user clicking send e-mail).   If both buttons appear together, a user could review their answers, reload/take the lesson again to improve their score, and then send the report only if they did well. 
    So the question is:  Is there a way to control the Review Quiz button?
    I do have a workaround:  Make the Review button transparent and put an image of the button on the slide to appear 20 or 30 seconds into the slide, hopefully the user will have reported their answer before the review button appears.  But this is a trick and a savvy user might notice it. (Particularly since there are several lessons that they'll take.)
    Thanks for your help!
    Jenny N

    OK, limitation to the workaround. 
    It doesn't seem to matter where I put the "pause after" control on the slide, the slide pauses about half-way through the slide length.  So I have to make the slide length 2x the time I want before the pause (So for a 20 second pause, I had to set the slide length to 40 seconds).
    Hope this helps if anyone else tries something like this,
    Jenny N

  • Which table the release code saved?

    Dear Experts,
    I am developing a report of the PR released status.I need to know where the Processor and releaser of
    the PR saved?
    I already know the FM to get those information. Please do not inform me the FM' name.
    Thanks in advance.
    BR Edward
    Edited by: Edward on Feb 3, 2009 2:41 PM

    hi
    check this thread
    Re: table for pr release strategies
    hope this helps
    regards
    Aakash Banga

  • How could I find table with match codes

    I have to enlarge matchcode for table fields. How could I do that. Where to find it and how 
    I would highly appreciate an example
    Thank you in advance

    Hi,
    Matchcode objects replaced by the Search help
    PARAMETERS p ... MATCHCODE OBJECT search_help.
    so you will find this in the SE11, give the name of the object in the search help and press Display you will get that one, if you want to enlarge that one you need to write the search help exits...
    All search help exits must have the same interface as the function module F4IF_SHLP_EXIT_EXAMPLE. However, you can define any number of additional optional parameters, especially exporting parameters. For further information about the interface, refer to the function module documentation.
    Look at the below SAP help examples ..
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
    Regards
    Sudheer

Maybe you are looking for

  • Posting Stock In plant

    While doing stock posting(MB1C) in plant I am Getting the following Error. 1). Posting only possible in periods 2008/03 and 2008/02 in company code ENSU 2). IN MB1C DOCUMENT DATE = 10.01.2008 3). IF  I AM GIVING 10.03.2008(BASED ON THAT ERROR) IT THR

  • Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

    Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

  • DME- Allignment issue for UK

    Hello Expert, I need assistance with respect to DME file creation for UK client. My issue is with alignment, I have created the file as per the layout provided by the client but the problem is below. Client want the file in the below format, VOL1 HDR

  • NameNotFoundException

    Hi, While executing the application, I get the following exception. com.sap.engine.services.jndi.persistent.exceptions. NameNotFoundException: Object not found in lookup of OLMDataSource.      at com.sap.engine.services.jndi.implserver.ServerContextI

  • Create custom menu and add menu elements to it

    hi, i used the sample javacript "ScriptMenuAction.jsx" to create a custom menu. that script has this command: var mySampleScriptAction = app.scriptMenuActions.add("Display Message"); which adds submenu called Display message. my question is how to ad