F4 Process takes a long time to show the values

Hi gurus,
We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table.
This infoObject is being used in a Query (3.X version) and when we press the F4 to obtain the values, it takes a long time to show them.
The query takes data from a Multiprovider, and the multiprovider only has one Cube.
The issue is happening with a lot of query (obviosly, with the same object), and there is no reason to do it I think, because the amount of records is not too much (10 K rec).
So, what do you think is happening? all your help will be helpfull.
Regards, Federico

Frederico / Rob,
setting the InfoObject property of 'Query execution filter value selection' to 'values in master data table' has the consequence that it is indeed faster on the query selection screen, but then when selecting filter values after the report has been displayed is not restricted to the values in the report results - again all master data values are shown for selection. This is not acceptable to our users.
Ideally, I would like to see two settings for query execution - master data for the initial selection screen, only posted values for navigation after the query has been executed. But I doubt that's going to happen.
In BW3.5 I seem to remember that you can set the choice of F4 display within the web template (can't in BI7).
NB for BI7 Java execution, examine the 'order for F4 help' on the InfoObject attributes and remove most of SAP's default settings. This will speed things up a little.
David

Similar Messages

HT4927 This may take a long time, depending on the size of the library. How long is a long time? Mine has been rebuilding now for over 24hrs?

"This may take a long time, depending on the size of the library". How long is a long time? Mine has been rebuilding now for over 24hrs?

"This may take a long time, depending on the size of the library"
How big is your library?
OT

Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Deploy customize workflow takes a long time to show up in application

Hi,
This is the first time (newbie) i am customizing and deploying work flow in ebiz(R12), the problem that I am facing is that after I deploy the customize workflow it takes a long for the ebiz to pickup/show the changes.
What I did was to customize a standard workflow and save it back to database. I have tried retrieving the customize workflow to make sure that the workflow was save into database (not a access problem). After about a day then the customize workflow shows up (I used the 'status diagram' to see the workflow progress). Have already tried restarting the server, clearing out the cache but the customization still does not take effect (will only take effect the next day) . Am i missing a step ?

Hi,
Unless you are specifying an effective date in the future when you deploy the definition, the new version should become available immediately. Any existing workflow processes will continue to run using the definition that was valid when the process started, but any new processes will use the new definition.
If this is not happening, then I would urgently raise a service request with Oracle support, as you are experiencing something very different from the expected functionality.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Hyperion Financial Reporting is taking long time to show the User POV

Hi,
we are using the HFR (version 9.3.1.2) and when i double click on any report in the workspace it is taking 5 minutes to show me the User POV. Can any one of you let me know how to find where the issue is.
Regards,
VJ

Hi VJ
Things that I am aware of that can slow down reports are:
1. Lots of members on the page (HFR tries to bring all the data into memory when run to speed up data display when changing from page to page)
2. Nesting of attributes (due to dynamic nature of calculations)
3. Nesting of dynamic calcs (similar to above)
If you have any of the above that could be your issue although it sounds like it may be more a hardware issue than an issue with the reports themselves. Does it always take that long? even if you re-run a report that has been run before?
Regards
Stuart

Process takes a long time to run

I've taken a look at this month-end process and noticed that it does extensive sorting. I've tuned the sort_area_size, sort_area_retained_size so that most sorting occurs in memory. Hit ratios are high 90s as well when the process is running.....
What else can I try? Will a view help if I create it? I don't think so...What about materialized views instead of a simple view...
Thanks.

Thanks for the reply dbahelp.
The smallest tables have like 50000 rows, the largest about 3 million rows. You think caching would help? It looks to me that if I cache say the smallest tables, the cache will be refreshed anyway when the large tables are being read.
I'm looking at the indexes involved but there is always the balance between indexes. I don't want to run into performance issues when other processes start to update the tables. In other words, I don't want to fix this problem by making other processes slower.

When using photos from the "Media" option in Applescripts and other apps, it takes a LONG time to load the photos from iPhoto...

It also happens when using the Media option in programs like iMovie. Has anyone found a solution for this problem?

That is long...
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it is...
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there.
Regards
TD

OPM process execution process parameters takes too long time to complete

PROCESS_PARAMETERS are inserted every 15 min. using gme_api_pub packages. some times it takes too long time to complete the batch ,ie completion of request. it takes about 5-6 hrs long time ,in other time s it takes only 15-20 mins.This happens at regular interval...if anybody can guide me I will be thankful to him/her..
thanks in advance.
regds,
Shailesh

Generally the slowest part of the process is in the extraction itself...
Check in your source system and see how long the processes are taking, if there are delays, locks or dumps in the database... If your source is R/3 or ECC transactions like SM37, SM21, ST22 can help monitor this activity...
Consider running less processes in parallel if you have too many and see some delays in jobs... Also indexing some of the tables in the source system to expedite the extraction, make sure there are no heavy processes or interfaces running in the source system at the same time you're trying to load... Check with your Basis guys for activity peaks and plan accordingly...
In BW also check in your SM21 for database errors or delays...
Just some ideas...

Opening PDF files in Reader itself takes a long time

When I try opening PDF Files in Reader itself, this process takes a long time (more then 2 minutes for opening PDF files).
When I try opening PDF Files directly from My computer, My documents: no problem (direct opening).
Running Reader XI on Windows XP SP3.

Hi,
According to your description, you want to open pdf file in the Adobe Reader directly from document library.
I suggest you do as the followings:
1. In SharePoint Central Administration site, click Application Management->Manage Web Applications, select the web application for the site. Click Authentication
Providers, select default zone, and select Yes for "Enable Client Integration?".
2. click Site Settings-> Site collection features->"Open Documents in Client Applications by Default" click Activate
3. set the default open behavior for a document library by using the document library settings page.
4. Enable the “Adobe Arcobat SharePoint OpenDocuments Component”add-on in the IE11.
5. Add your current site URL to the trusted web sites in IE11.
There is a similar threads for your reference:
http://blog.mikehacker.net/2010/05/03/unable-to-open-pdf-directly-from-sharepoint-2010/
Thanks,
Wendy Li
TechNet Community Support

Outlook 2010 takes a long time to open emails with embedded images

Hello,
outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML email messages or RSS tiems" is not selected.
it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
When I open the same message in OWA no delays at all.
I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
Any ideas?

Hi Aprylmsx,
According to your description, I recommend you refer to the following methods to troubleshoot the issue:
1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
In addition, How many users encounter this issue? a lot or just only you?
Best regards,
Niko
Niko Cheng
TechNet Community Support

Time Machine/Time Capsule backups successful, but take a long time

I purchased a 512GB Time Capsule about a year ago. Since I got it, backups have been successful, but very slow. An average backup takes about 40-50 minutes, usually for less than 20 MB transferred.
Here are a couple summaries of recent backups (see end of post for full logs):
BACKUP 1:
11 minutes to detect if pre-backup thinning was necessary
18 minutes to copy 281 MB
5 minutes to copy 5.4 MB
4 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
There were no error messages.
BACKUP 2:
4 minutes to detect if pre-backup thinning was necessary
12 minutes to copy 15 MB
5 minutes to detect if pre-backup thinning was necessary
15 minutes to copy 3.8 MB
1 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
This time, there were error messages about "Unable to rebuild path cache for source item. Partial source path:"
My Time Capsule is placed about 5 feet from my laptop, with no obstructions between them. I don't think it's a wireless speed issue, because I use the Time Capsule as my router, and my connection to the net is fine. Also, operations that don't require wireless connections, like detecting pre-backup thinning, also take a long time.
Does anyone have any idea what might be going wrong to cause my regular backups to take so long?
BACKUP 1:
14/09/09 2:09:47 PM /System/Library/CoreServices/backupd[18612] Starting standard backup
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Backup destination mounted at path: /Volumes/turban
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 2:21:15 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 860.3 MB requested (including padding), 280.02 GB available
14/09/09 2:39:05 PM /System/Library/CoreServices/backupd[18612] Copied 12159 files (281.3 MB) from volume butternut.
14/09/09 2:39:08 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 529.5 MB requested (including padding), 280.02 GB available
14/09/09 2:44:18 PM /System/Library/CoreServices/backupd[18612] Copied 11775 files (5.4 MB) from volume butternut.
14/09/09 2:48:43 PM /System/Library/CoreServices/backupd[18612] Starting post-backup thinning
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-132947: 280.02 GB now available
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Post-back up thinning complete: 1 expired backups removed
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Backup completed successfully.
14/09/09 2:50:18 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine disk image.
14/09/09 2:50:22 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine network volume.
BACKUP 2:
14/09/09 9:09:46 AM /System/Library/CoreServices/backupd[15833] Starting standard backup
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Backup destination mounted at path: /Volumes/turban
14/09/09 9:10:07 AM /System/Library/CoreServices/backupd[15833] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 9:10:10 AM /System/Library/CoreServices/backupd[15833] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 9:14:06 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 542.2 MB requested (including padding), 280.02 GB available
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:26:00 AM /System/Library/CoreServices/backupd[15833] Copied 1223 files (15.3 MB) from volume butternut.
14/09/09 9:31:35 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 527.5 MB requested (including padding), 280.02 GB available
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:20 AM /System/Library/CoreServices/backupd[15833] Copied 11336 files (3.8 MB) from volume butternut.
14/09/09 9:47:06 AM /System/Library/CoreServices/backupd[15833] Starting post-backup thinning
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-082428: 280.02 GB now available
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Post-back up thinning complete: 1 expired backups removed
14/09/09 9:49:15 AM /System/Library/CoreServices/backupd[15833] Backup completed successfully.
14/09/09 9:49:19 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine disk image.
14/09/09 9:49:25 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine network volume.

peterjm wrote:
I checked all of the steps in #D2 of the Troubleshooting Guide.
One other thing thing you might try, is a +*Verify Disk+* (not permissions) on your internal HD. That will not take anything like 40 hours! If it reports problems, you'll have to boot from your Install disc and use it's copy of DU to repair it. Post back if you need to do this but aren't sure how.
I think it's very fishy that Repair Disk took 40 hours -- it seems like any operation that touches the hard drive on the Time Capsule takes a long time. Maybe the hard drive is having problems? What sort of problems could a drive have that would make everything VERY slow, but still successful?
Try connecting via an Ethernet cable; see what effect that has. Everything should be faster, of course, but not wildly. Just as an example, I'm doing backups to a USB hard drive via my Airport Extreme, about 15 feet from my iMac. When I first started that way, I did a full backup via Ethernet (about 21 gb/hour), then erased it and ran again wirelessly (about 12 gb/hour).
Even 5 feet apart, you may have some sort of interference or other communications problem; if Ethernet is many times faster, then you may need to have your TC and/or wireless card examined.

Firefox 5 seems to take a long time to download ...is that right...I mean...more than 5 min...I finally stopped the download...

i got the download bar then it never seemed to go away..how long should it take to download firefox 5....it's never taken that long..I had to stop it after 5 minutes or so

peterjm wrote:
I checked all of the steps in #D2 of the Troubleshooting Guide.
One other thing thing you might try, is a +*Verify Disk+* (not permissions) on your internal HD. That will not take anything like 40 hours! If it reports problems, you'll have to boot from your Install disc and use it's copy of DU to repair it. Post back if you need to do this but aren't sure how.
I think it's very fishy that Repair Disk took 40 hours -- it seems like any operation that touches the hard drive on the Time Capsule takes a long time. Maybe the hard drive is having problems? What sort of problems could a drive have that would make everything VERY slow, but still successful?
Try connecting via an Ethernet cable; see what effect that has. Everything should be faster, of course, but not wildly. Just as an example, I'm doing backups to a USB hard drive via my Airport Extreme, about 15 feet from my iMac. When I first started that way, I did a full backup via Ethernet (about 21 gb/hour), then erased it and ran again wirelessly (about 12 gb/hour).
Even 5 feet apart, you may have some sort of interference or other communications problem; if Ethernet is many times faster, then you may need to have your TC and/or wireless card examined.

Displaying PathGeometry into canvas take too long time

Hi every one,
I am working on spatial data with an application WPF and I would like to draw a map from data queries.
I got my data and I am able to draw them on a canvas with scroll bar and zoom.
My problem is when I want to zoom or scroll the canvas take a long time before draw the map.
The big problem is there :
Dim poly As New Polygon
poly.Stroke = Brushes.Red
poly.Fill = Brushes.Orange
poly.StrokeThickness = 5
Dim colPoint As New PointCollection
For i = 1 To geo.STNumPoints
Dim ls As New LineSegment()
colPoint.Add(New Point(geo.STPointN(i).STX.Value - extentA, geo.STPointN(i).STY.Value - extentB))
Next
colPoint.Add(New Point(geo.STPointN(1).STX.Value - extentA, geo.STPointN(1).STY.Value - extentB))
poly.Points = colPoint
masterCanvas.Children.Add(poly)
so the canvas is "masterCanvas" and i add each Polygon one by one. I would like if it is possible to gather all polygon into one "image" and then when it will refresh the canvas it will draw only one thing.
Regards.

Hi,
I found that you have posted it in the forum Acamar suggested.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/e2d50b4e-0d76-4a3c-b229-521b648b54b3/displaying-pathgeometry-into-canvas-take-too-long-time?forum=wpf#e2d50b4e-0d76-4a3c-b229-521b648b54b3
Please just focus on that thread, and you could mark if any reply which is helpful as answer.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Time machine takes very long time

Time machine takes very long time to write the back up.
For writing 2,33 GB (from 26,33GB) it takes abou14 hours and I don't know, why it is so very slow. I work with USB 3.0 2 TB external hard disk drive.

Try Here > http://pondini.org/TM/D2.html
From Here > http://pondini.org/TM/Troubleshooting.html

Query taking long time To Fectch the Results

Hi!
when I run the query,it takes too long time for fetching the resultsets.
Please find the query below for the same.
SELECT
A.BUSINESS_UNIT,
A.JOURNAL_ID,
TO_CHAR(A.JOURNAL_DATE,'YYYY-MM-DD'),
A.UNPOST_SEQ,
A.FISCAL_YEAR,
A.ACCOUNTING_PERIOD,
A.JRNL_HDR_STATUS,
C.INVOICE,
C.ACCT_ENTRY_TYPE,
C.LINE_DST_SEQ_NUM,
C.TAX_AUTHORITY_CD,
C.ACCOUNT,
C.MONETARY_AMOUNT,
D.BILL_SOURCE_ID,
D.IDENTIFIER,
D.VAT_AMT_BSE,
D.VAT_TRANS_AMT_BSE,
D.VAT_TXN_TYPE_CD,
D.TAX_CD_VAT,
D.TAX_CD_VAT_PCT,
D.VAT_APPLICABILITY,
E.BILL_TO_CUST_ID,
E.BILL_STATUS,
E.BILL_CYCLE_ID,
TO_CHAR(E.INVOICE_DT,'YYYY-MM-DD'),
TO_CHAR(E.ACCOUNTING_DT,'YYYY-MM-DD'),
TO_CHAR(E.DT_INVOICED,'YYYY-MM-DD'),
E.ENTRY_TYPE,
E.ENTRY_REASON,
E.AR_LVL,
E.AR_DST_OPT,
E.AR_ENTRY_CREATED,
E.GEN_AR_ITEM_FLG,
E.GL_LVL, E.GL_ENTRY_CREATED,
(Case when c.account in ('30120000','30180050','30190000','30290000','30490000',
'30690000','30900040','30990000','35100000','35120000','35150000','35160000',
'39100050','90100000')
and D.TAX_CD_VAT_PCT <> 0 then 'Ej_Momskonto_med_moms'
When c.account not in ('30120000','30180050','30190000','30290000',
'30490000','30690000','30900040','30990000','35100000','35120000','35150000',
'35160000','39100050','90100000')
and D.TAX_CD_VAT_PCT <> 25 then 'Momskonto_utan_moms' end)
FROM
sysadm.PS_JRNL_HEADER A,
sysadm.PS_JRNL_LN B,
sysadm.PS_BI_ACCT_ENTRY C,
sysadm.PS_BI_LINE D,
sysadm.PS_BI_HDR E
WHERE A.BUSINESS_UNIT = '&BU'
AND A.JOURNAL_DATE BETWEEN TO_DATE('&From_date','YYYY-MM-DD')
AND TO_DATE('&To_date','YYYY-MM-DD')
AND A.SOURCE      = 'BI'
AND A.BUSINESS_UNIT = B.BUSINESS_UNIT
AND A.JOURNAL_ID      = B.JOURNAL_ID
AND A.JOURNAL_DATE = B.JOURNAL_DATE
AND A.UNPOST_SEQ      = B.UNPOST_SEQ
AND B.BUSINESS_UNIT = C.BUSINESS_UNIT
AND B.JOURNAL_ID = C.JOURNAL_ID
AND B.JOURNAL_DATE = C.JOURNAL_DATE
AND B.JOURNAL_LINE = C.JOURNAL_LINE
AND C.ACCT_ENTRY_TYPE = 'RR'
AND C.BUSINESS_UNIT = '&BU'
AND C.BUSINESS_UNIT = D.BUSINESS_UNIT
AND C.INVOICE = D.INVOICE
AND C.LINE_SEQ_NUM = D.LINE_SEQ_NUM
AND D.BUSINESS_UNIT = '&BU'
AND D.BUSINESS_UNIT = E.BUSINESS_UNIT
AND D.INVOICE = E.INVOICE
AND E.BUSINESS_UNIT = '&BU'
AND
((c.account in ('30120000','30180050','30190000','30290000','30490000',
'30690000','30900040','30990000','35100000','35120000','35150000','35160000',
'39100050','90100000')
and D.TAX_CD_VAT_PCT <> 0)
OR
(c.account not in ('30120000','30180050','30190000','30290000','30490000',
'30690000','30900040','30990000','35100000','35120000','35150000','35160000',
'39100050','z')
and D.TAX_CD_VAT_PCT <> 25)
GROUP BY
A.BUSINESS_UNIT,
A.JOURNAL_ID,
TO_CHAR(A.JOURNAL_DATE,'YYYY-MM-DD'),
A.UNPOST_SEQ, A.FISCAL_YEAR,
A.ACCOUNTING_PERIOD,
A.JRNL_HDR_STATUS,
C.INVOICE,
C.ACCT_ENTRY_TYPE,
C.LINE_DST_SEQ_NUM,
C.TAX_AUTHORITY_CD,
C.ACCOUNT,
D.BILL_SOURCE_ID,
D.IDENTIFIER,
D.VAT_TXN_TYPE_CD,
D.TAX_CD_VAT,
D.TAX_CD_VAT_PCT,
D.VAT_APPLICABILITY,
E.BILL_TO_CUST_ID,
E.BILL_STATUS,
E.BILL_CYCLE_ID,
TO_CHAR(E.INVOICE_DT,'YYYY-MM-DD'),
TO_CHAR(E.ACCOUNTING_DT,'YYYY-MM-DD'),
TO_CHAR(E.DT_INVOICED,'YYYY-MM-DD'),
E.ENTRY_TYPE, E.ENTRY_REASON,
E.AR_LVL, E.AR_DST_OPT,
E.AR_ENTRY_CREATED,
E.GEN_AR_ITEM_FLG,
E.GL_LVL,
E.GL_ENTRY_CREATED,
C.MONETARY_AMOUNT,
D.VAT_AMT_BSE,
D.VAT_TRANS_AMT_BSE
having
(Case when c.account in ('30120000','30180050','30190000','30290000',
'30490000','30690000','30900040','30990000','35100000','35120000','35150000',
'35160000','39100050','90100000')
and D.TAX_CD_VAT_PCT <> 0 then 'Ej_Momskonto_med_moms'
When c.account not in ('30120000','30180050','30190000','30290000','30490000',
'30690000','30900040','30990000','35100000','35120000','35150000','35160000',
'39100050','90100000')
and D.TAX_CD_VAT_PCT <> 25 then 'Momskonto_utan_moms' end) is not null
So Could you provide the solution to fix this issue?
Thanks
senthil

[url http://forums.oracle.com/forums/thread.jspa?threadID=501834&tstart=0]When your query takes too long ...
Regards,
Rob.

F4 Process takes a long time to show the values

Similar Messages

Maybe you are looking for