F4 Value Help in select option

Hi ,
I have created one WD component as value F4 help to use into another component's select option. I am able to use this component in the Input Field UI element by selecting free programming as input help mode and name of this component used as input help component usage . I dont know how to pass this component in select option . can any one help me please to do this functionality.
Thanks ,
Aashish

I have not tried them out please check it -
IN IF_WD_SELECT_OTPIONS~ADD_SELECTION_FIELD parameters list
I_VALUE_HELP_TYPE     Importing     Like     IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
I_VALUE_HELP_ID     Importing     Type     WDY_VALUE_HELP_ID
I_VALUE_HELP_MODE     Importing     Type     WDY_MD_VALUE_HELP_MODE_ENUM
I_VALUE_HELP_STRUCTURE     Importing     Type     DDOBJNAME
I_VALUE_HELP_STRUCTURE_FIELD     Importing     Type     FIELDNAME
I_HELP_REQUEST_HANDLER     Importing     Type Ref To     OBJECT
we have to use them -
pass the FVS type to I_VALUE_HELP_TYPE = IF_WD_VALUE_HELP_HANDLER=>CO_VH_TYPE_BACKEND (check for teh other attributes in IF_WD_VALUE_HELP_HANDLER) or IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
to this I_VALUE_HELP_ID i think we have to either pass the FVS comp usage name or FVS webdynpro component name
I guess this is also used I_HELP_REQUEST_HANDLER - i think we need to pass the object reference of FVS or somethihg like that..
Make sure you given them in CAPS for these parameters.
Just try them out....Hope this helps

Similar Messages

Value help for select options (pass the selected values to the select opt)

Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.

Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
    STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
    IMPORTING
      STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N.

Personalised Value Help in Select-Option field WD ABAP

Hi
I would like to know how I could provide the user with generic value help. I am using the Select Options in a Web Dynpro(ABAP) Application.
Regards
Faaiez

Hi
The key word here is "generic value help". This means the values that I want to fill the drop down with changes all the time based on various criteria. I need to fill the help values within the ABAP code based on the values in internal tables.
Regards
Faaiez

Value help for select-option not filling selection field

I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
                      i_id = 'SHORT_D'
                      i_description = 'Program'
                      it_result = lt_range_table
                      i_read_only = read_only
                      i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
                      i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.

Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George

Integrate Freely Programmed Value Help in Select option WDR_SELECT_OPTION

Hello All,
I have created Freely Programmed Value Help name (ZVALUE_HELP) by using IWD_VALUE_HELP.I have develop an application(ZSELECT_OPTION) which uses the resubale component WDR_SELECT_OPTION for select option.i want search help for one of my select option input field .
i wrote the following code.
*initalise the used component
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_ci_serach_help( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
* add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
I_ID = 'ZCI_STATUS'
IT_RESULT = LT_RANGE_TABLE
I_READ_ONLY = READ_ONLY
I_OBLIGATORY = ABAP_FALSE
I_VALUE_HELP_TYPE = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
I_VALUE_HELP_ID = 'ZVALUE_HELP'
when i execute the select option application n click on search help button i got error "Component usage ZVALUE_HELP does not exist.
Edited by: Abhilasha Dahare on Aug 3, 2011 11:10 AM

hi Abhsilasha,
I think your code is some thing wrong.
you have to assign free value help like below method.
in the attribute( the select option field ) properties, you will find input help mode property, in that select 'freely programmed'.
then you willl get some more fields, there you have to provide ZVALUE_HELP
of follow reema suggestion in below link
How to integrate a Search Help in a dynamically created Select-Option?
Regards
Srinivas
Edited by: sanasrinivas on Aug 3, 2011 12:06 PM
Edited by: sanasrinivas on Aug 3, 2011 12:10 PM

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

F4 help for select options based on parameter value

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

Clearing the displayed value for a SELECT-OPTION

How do I clear the displayed value of a SELECT-OPTION?
I have 2 SELECT-OPTIONs on my screen (standard basic report program screen). I use code like this to populate the drop-down boxes for each one.
=====
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
PERFORM fill_prgrp_values.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
PERFORM fill_prctr_values.
=====
The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION.
If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
1. Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
2. Clear the displayed value from the second SELECT-OPTION that the user entered previously. That value became invalid when the user picked a new value for the first SELECT-OPTION.
How do I clear that second displayed value?
I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low. They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen.
I need to clear out the displayed value so the user will either leave it blank or enter or select a new value.
I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen.
Thanks for your help.

Sorry, but calling DYNP_VALUES_UPDATE did not work. This is how I coded it.
fld_reset_rcd-fieldname = 'S_PRCTR'.
fld_reset_rcd-stepl      = sy-stepl.
CLEAR fld_reset_rcd-fieldvalue.      " re-initialize s_prctr
CLEAR fld_reset_rcd-fieldinp.        " what goes in here?
APPEND fld_reset_rcd TO fld_reset_tbl.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname = 'ZFI_GL_BALANCE_NGL'
      dynumb = '1000'
    TABLES
      dynpfields = fld_reset_tbl
<Added code tags>
I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat. If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen. It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc.
To devrath.sampat -- Thanks for your example for building the drop-down list, but that is not the problem I am having. I am already able to build it just fine.
To repeat my problem, if I:
1. first enter / select a value for the first SELECT-OPTION s_prgrp
2. then enter / select a value for the second SELECT-OPTION s_prctr
3. And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
     when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

How to created Freely Programmed F4 help in Select Options

hi,all
   I have a probelm about how to created a Freely Programmed F4 help in Select Options,and put help value into select options field
Thanks and Best Regards

Hi Haung,
You need to use FREE_HELP not the component name.
Modify you code as below:
   LT_RANGE_TABLE_V = wd_this->m_handler_V->create_range_table( 'ZCYPHDATE' ).
wd_this->M_HANDLER_V->add_selection_field(
      i_id                         = 'ZCYPHDATE'
      it_result                    = LT_RANGE_TABLE_V
      i_value_help_type            = if_wd_value_help_handler=>CO_PREFIX_APPLDEV
      i_value_help_id              = 'FREE_HELP'
      i_no_intervals               = abap_false ).
Hope this helps you.
Regards,
Rama

On value request in select-options in a repot URGENT

Hi all,
my requirement is to provide on value request in select-options
in selection screen Gsdpr user one select-option is there
For GSDPR User field, provide F4 help. Users list can be selected from ZWF_UPI table where WF_UPI_TYPE is HR. From the table, select UPI Number and employee full name fields
in ZWF_UPI table the key fields are UPI and WF_UPI_TYPE
non key field is emp_full_name.
please send me the code .
regards
Nagendra

Hi,
I do not have sample code , But you have to use the function module
F4IF_INT_TABLE_VALUE_REQUEST on the AT-SELECTION-SCREEN ON VALUE REUQEST FOR S_OPTION-LOW event
Select Data as per the requirement into Value table of the Function module
Return the Data fro the Return table of the function module.
The good choice will be Go to SE37-> Type this FM F4IF_INT_TABLE_VALUE_REQUEST and look for Where used list-> Programs . There u will get the list of programs used this FM
Regards
Pavan

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

F4 help in select option

Hi All,
We have created a select option for a field of our database table. This field has a value range in its domain. For Example
Fix Val    Short Description
01           INR
02           US
03           EUR
When i press the f4 help of select option, am able to see both the number and the description in the F4 help. But when i select a value, it is only displaying the fixed value (01) in the select option field.
But i want the Short Description to be displayed instead of the fixed value.
Please tell me how to proceed.
Thanks in advance.

Hi,
When there are any values in the domain range it considers only the fixed values (keys)
to get the description what you can do is:
1.create a your own f4 help with the field description.
2.in the select options you can give the name of F4 help when you are populating the selection field.
wd_this->m_handle->add_selection_field(
                        i_description = 'Candidate Profit Center'
                        i_id = '/MRSS/T_RMOR_PROF_CENTER'
                         *i_value_help_type = if_wd_value_help_handler=>co_prefix_searchhelp*
                        *i_value_help_id = '/MRSS/SH_RM_PC_GROUP'*
                           it_result = lt_range_table
                        i_read_only = read_only ).
Priya

Problem on Search Help for select-option

Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!

Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
   based upon
   MULTIPLE Selection,
   selected by the user,
   in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynprofield     = 'BUKRS'
      dynpprog        = sy-REPID
      dynpnr          = sy-dynnr
      multiple_choice = 'X'
      value_org       = 'S'
    TABLES
      value_tab       = ITAB
      return_tab      = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
    BUKRS-SIGN = 'I'.
    BUKRS-OPTION = 'EQ'.
    BUKRS-LOW = RETURN-FIELDVAL.
    BUKRS-HIGH = RETURN-FIELDVAL.
    APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m.

How to get all the values in the Select-option.

Hi,
I got the select-option field so_week, for eg. If I give 200923 to 200926 (year and week) in the selection screen and then I need to pass this value (200923) to the FM 'ZWEEK_GET_FIRST_DAY' to get the first day of the week.
My question is how can i get all the values from the select option, (i.e) i need to get 200923, 200924,200925, 200926.
Regards,
Anbu.

Hello,
I will prefer Max's solution. But just for the sake of this req.
i need to get 200923, 200924,200925, 200926
i am proposing my soln:
DATA: V_WEEK TYPE RSCALWEEK.
SELECT-OPTIONS: S_WEEK FOR V_WEEK NO-EXTENSION OBLIGATORY.
AT SELECTION-SCREEN.
DATA:
V_COUNT TYPE I,
V_ADD   TYPE I,
RT_WEEK TYPE RANGE OF RSCALWEEK,
RS_WEEK LIKE LINE OF RT_WEEK.
V_COUNT = ( S_WEEK-HIGH - S_WEEK-LOW ) + 1.
DO V_COUNT TIMES.
    RS_WEEK-SIGN = 'I'.
    RS_WEEK-OPTION = 'EQ'.
    RS_WEEK-LOW = S_WEEK-LOW + V_ADD.
    APPEND RS_WEEK TO RT_WEEK. "RT_WEEK--> Will contain the week values
    CLEAR RS_WEEK.
    V_ADD = V_ADD + 1.
ENDDO.
@Max: I was stupid enough not to think of your solution. Need to leave office
Cheers,
Suhas

Can i assign a collective srch help for select option in list display

can i assign a collective srch help for select option in list display

Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.

F4 Value Help in select option

Similar Messages

Maybe you are looking for