F4IF_INT_TABLE_VALUE_REQUEST output language change

Hi experts,
I am buidling an internal table data in english language but when I click F4 on the specified field at run time , I am getting output pop-up data in different language seems like korean.
Even the return code from 'F4IF_INT_TABLE_VALUE_REQUEST' is zero i.e success.
What could be the possible error or is it related to any Unicode check?
Thank you
Depesh Kumar

Hi deepesh,
Just check the table from which your fetching data into internal table is having any language key fields, if there the pass sy-langu and fetch the required data only.
There is noting like language in the function module, it all depends upon the data what you are fetching.
Just give the screen field and the table name so that we can look and comment
regards
Kumar M

Similar Messages

  • PO sapscript output language

    Hi,
    how to change the output language for sapscript, in transaction ME23N ( purchase order ), using print preview or sending output to spool, please ? The sapscript code differs from language to language, but by default the English version is taken ?
    thanks,
    kind regards,
    Rolf

    Hi,
    You can change the Message output language and can get the particular printout.
    If not you can give print out in debug mode and change the ekko-spars parameter value your required language in call function OPEN_FORM .
    Language value should be 1 char in this.
    Ex: EN -> E, DE-> D.
    Pls try .
    Thanks.
    Rajesh

  • I got a Macbook Air. My system language is russian but the login password is english. I pu the laptop into sleep mode, then wanted to log in again, but the language seems to have switched to russian, there's no language change button! How do I log in now?

    I got a Macbook Air. My system language is russian but the login password is english. I put the laptop into sleep mode, then wanted to log in again, but the language seems to have switched to russian, there's no language change button! How do I log in now?

    Severia,
    I tried your solution, but it did not work with my laptop. After I restart the laptop, the language does not change and I cannot type the password in English language. Do you have any other suggestion?
    Thank you.

  • Language changed on my IPOD...no longer English???

    Language changed on my IPOD...8gb Classic?  How do I get it back to English?  Cannot read?!

    Click here and follow the instructions.
    (63510)

  • Language changed

    Language changed and I can't change it back

    I suppose that there is an unreadable languge that you do not master.
    - click home button
    - look for the settings icon, if not on the first psge, on one of the following
    - click it, it opens on the page where Airplane mode is the uppermost, it easily found because it has an airplane icon
    - on that first page swipe down to the third segment
    - in that segment click on the first icon (the same icon as ettings itself), (it is "general" in english)
    - in the page that opens, swipe down to the fifth segment
    - in that segment click on the third icon from above, ("international" in english)
    - in the page that opens click on the first icon, it opens a page where you can each language.
    - click "done" when you have done, then it will change the language to what you have chosen (it takes some time). You do not have to restart.
    succes,
    Lex

  • Federated Portal Language change not visible on remote role

    Hi,
    Remote role assigment is done on consumer portal. This remote portal role comes from a BI Producer portal.
    This roles has worksets and iviews attached to it like km navigation iview etc.
    User on consumer portal has options to change his language to french from default english.
    Here the issue is, this language change does not reflect or apply to the remote role and its iviews or contents.(It continues to show in english) . But it works without problem o n local roles or ivews as expected.
    Any idea on how this language change can be effected on the remote role and its contentc will be much appreciated.
    Regards,
    Ashok D

    Hello Ashok,
    You must remember that because this is RRA the content will actually run on the producer (unless this is an AI iView).
    This means that the language will be determine according to the user's language defined on the producer itself, therefor you have to change the language of that specific user on the producer portal.
    If this does not help it might be that the iView is forcing the language, then we'll have to try somehthing else.
    Update me with the results of the first triage,
    Also have a look at SAP Note # 1295703 under the Language category, it explains the algorithem of determining the language.
    Best Regards,
    Nadav.

  • Keyboard language changed only in Firefox not other programmes

    I have Firefox in English but I use a Spanish keyboard, meaning some keys like question marks or quotation marks are in different places, there are accents, a key for ç, etc. It has always worked normally but today, while the keyboard is working correctly with all other programmes in Firefox it works as if the settings were changed to an English (I think) keyboard.
    I don't have that problem with Chrome though, it's just Firefox. How is that possible (add question mark here, I can't guess what key I'im supposed to use for it).
    I haven't changed anything in the settings, so the only possibility could be some kind of shortcut I've accidentally pressed, even though I don't know how that's even possible, as I assumed you can't have several keyboard language settings selected at the same time depending on the programme you're using.
    I type in different languages so this is terribly annoying! Thanks for any help.

    It is possible that you have switched the keyboard layout by accident by using the key sequence to rotate the layout.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://support.microsoft.com/kb/306993 - HOW TO: Use the Language Bar in Windows XP
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
    Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application
    * The default key combination to rotate the layout is the Ctrl+Shift or Alt+Shift combination that is used in Firefox for menu items, so it is quite possible to change the layout accidentally.
    * To avoid an unintentional switch, assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
    * Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence

  • When i set my region to United Arab Emirates, the language changes to arabic instead of english. help!

    When i set my region to United Arab Emirates, the language changes to arabic instead of english. help!

    I also have the same issue. Even if the language is set to English, the calendar and time (in the top middle part of the screen) are in arabic.

  • Standard SAP HR report to give output on change in fields values

    Hi
    Is there any starndard report in sap hr which will give output on changes on the infotype fileds for given two dates.

    Hi,
       Use FM HR_INFOTYPE_LOG_GET_DETAIL .
    Regards,
    Srini.

  • Output for changes versions in SRM

    Hello,
    We are currently trying to control when our SRM (server 550)system is to send output to our vendors, but the output is only to be sent if specific elements in an order is changed.
    To do this we are using the table BBPD_COMP_FIELDS.
    This works very well, there is just one problem that we cant seem to understand why.
    If you created an order, then change the order with something that was not suppost to send output (because it is set in the table above) it sends the output. If you then change the same again it will not send out put (which is correct).
    So what it does is for changes that shouldent send output when changed:
    order --> output (correct)
    change1 --> output (Wrong)
    change2 --> no output (correct)
    it should of been:
    order --> output
    change1 --> no output
    change2 --> no output
    Question is why and how do we get it to stop doing this?
    Hope someone can help us.
    Best Regards
    Lisa M Simonsen

    Hi
    Use the PO version control BADi to change the version for the PO on identified field changes. In SPRO, out put conditions, trigger the change output when there is a change version of the document. This should work.
    BBPD_COMP_FIELDS (with SM30). There is something mentioned about which fields to compare for PO output, you have to scroll some way down to get there.
    Re: Changed PO output
    Also, Please go through the following pointers, which might help you out.
    Re: PO output fields
    Re: Control PO output to vendor
    Re: No Output Condition on Purchase Orders
    Version Details
    Do let me know.
    Regards
    - Atul

  • Output On change

    Hiya
    Firstly - I want to know if i can activate an output on Change and not on Create.
    Secondly - I want the output to be created at a specific time of the date and it should have the data updated till then.
    For example i create an order before 5'oclock. Save it during the day and before end of day change it; before 7'oclock. and want the output as per the current status of the document.
    Any suggestion ???
    Thanks

    It can be done through requiments...

  • Names of column appearing in alv output after changing layout in alvgrid?

    Hi all
    I have a requirement where I am displaying 20 fields using alv grid(cl_gui_alv_grid). Now each time when I run I can change layout and can display any number of columns in output using change layout option.
    My requirement is i need to know the column names of the fields which are displayed upon changing layout in output. Using this column names I have to write some logic in code. Each time number of column may vary as per the user selection. Is there any method or way to get the names of columns selected in output display?
    Please help me in this regard.

    Hi,
    During run time you will get the ALV layout info using this function module.
    REUSE_ALV_GRID_LAYOUT_INFO_GET
    Regards,
    Anversha

  • Language change makes me unable to log on my Macbook!

    Hi guys,
    So yesterday I changed my language from English to Vietnamese. My computer went on sleep. When I tried to log on, it didn't show up the dots(for the password field). I'm thinking the language change has messed up the keyboards! Could anyone tell me how to fix the problem? I really need to log on my computer as soon as possible. Thank you so much.
    By the way, I changed the language to Vietnamese VNI.

    Hopefully we can get Tom or others in here to help.
    Does it boot into any of these modes?
    Holding Option/alt key at bootup.
    Holding SHIFT key at bootup.
    Target mode...
    http://support.apple.com/kb/HT1661
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
    Or do you have Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php

  • Language change to UK English, how do I get a "period" with talk to text?

    language change to UK English, how do I get a "period" with talk to text?

    How about "full stop"?

  • Language changed to Dutch and i can't get it bck t...

    I changed my sim card on Nokia E52 and the languag changed automatically to dutch. and i can't return it back to english although i've chose english as my first language in settings.
    Please help

    ''david.abel wrote:''
    On the Firefox home page, the Arabic language has suddenly started to appear
    Is the language for the menus and other user interface elements still English? If so,
    # Click the ≡ Menu Button and choose Preferences.
    # Click the Content icon.
    # Below Languages, click the Choose button.
    # Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
    [[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
    ''david.abel wrote:''
    Also, my browser history has started to take up part of the screen.
    I don't know what you mean by that. Please attach a screenshot.
    * [[How do I create a screenshot of my problem?]]

Maybe you are looking for