F4vpp processed files double in size?

We are using f4vpp tool to post-process F4V files recorded with FMLE and also on F4F files recorded server-side. And we noticed that in both cases files grow double in size after the processing than the original. Is this normal? And why?

Anyone?

Similar Messages

Captivate 4 Files double in size when upgraded to Captivate 5

I noticed when I looked at converting my Adobe Captivate 4 files to Adobe Captivate 5 that the files doubled in size (one went from 30 MB up to 90 MB). At http://blogs.adobe.com/captivate/2010/10/cptx_file_size.html, Adobe mentions that they know about the issue, and plan to resolve it in a "future" release. I have already applied the 5.0.1 patch recently released, but still have the same issue.
Any suggestions on how to resolve this, or when a patch might be released that does?
Thanks.

Hi there,
Patch does not address the size reduction issue. Can you share your 30 MB Cp4 project ?
Please upload the same to acrobat.com and email me the download link. My email id is ashwin at adobe dot com
Thanks,
Ashwin Bharghav B
Adobe Captivate Team

Exported an "Apple TV" version and my 700mb file doubled in size?

Based on a recommendation on these boards I bought QT Pro. This was because I had a 700MB AVI file that I needed to add chapters to. I was able to open the file and go through the process to add the "text" chapters. Worked fine. But when I exported to an ATV version of the file using the default settings, it went from being a 700mb file to being a 1.6gb file. Wow!
I'm a novice to this but I'm blown away by the jump in size. I'm wondering if I need to take a different approach to make it retain the chapters but be smaller in size.
Is this size normal? What are my options?
thanks much

Size = bitrate/sec X # seconds. The original files size has ZERO to do with it especially when you are transcoding. The original LENGTH does.
IIRC AppleTV spec is 5mb/sec equal to a decent quality DVD.
Use a lower bitrate. A higher bitrate than the source (which is clearly the case) won't improve the quality anyway - you cannot add bits that were not there. And H.264 is an impressive quality codec that can look great a lower bitrates.
Try exporting to iPod , only 700 kb/sec or iPhone/Touch specs at 1400 kb/sec vs. Apple TV, see if you like the quality.
Tip, select *one minute* of your source with some movement and test that by exporting the minute with various settings (iPod, iPhone, etc.) . It takes less time and you can see the results sooner. Then to figure out the total size just multiply that one minute file size X # minutes the original is in total. Note I never use the presents and use the manual settings instead, and frankly I rarely use QT Pro for this preferring the free MPEG Streamclip instead which is alo worth a try.
One other note: some codecs (WMV is the best example) are compressed and when you export them even without reencoding, e.g. using Save As to make a MOV file they double in size since in the WMV container they are compressed and only expand on playback. In the MOV container the uncompressed video is in the container for keeps.
A final note, video is expressed in kb or mb/sec which is kilobits or megabits/sec. 8 kilobits = 1 kilobyte, 8 megabits = 1 megabyte, which is important to know as file sizes are always expressed in KB/MB vs. kb/mb.

Firefox is continually "not responding"; between Mar 7 and Mar 8 the ".json" bookmarks file has doubled in size

For some time prior to Mar 7 FireFox (27.0.1) had started "not responding" when I clicked on any link on any page. In desperation I uninstalled and re-installed FireFox on Mar 7. The problem came back. The only other thing that I noticed when I looked at my profile folder is that the bookmarsbackup...json file doubled in size the next day (Mar 8)

Hi BillFreund,
I do not know. Do you notice duplicates? This should not happen.
This is a good reference to start troubleshooting if it starts to not respond any longer.
[[Firefox hangs or is not responding - How to fix]]
You can try to launch the browser in safe mode by clicking control + shift to see if the file doubles in size again.
Something else that you have installed isn't causing or contributing to that fault.
[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes][
I hope this helps.

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401

I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
     LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
          GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
     NOARCHIVELOG
     CHARACTER SET ZHT16BIG5
     NATIONAL CHARACTER SET ZHT16BIG5
     DATAFILE '/sisdev04/dbs/system01.dbf'
          SIZE 210M AUTOEXTEND OFF
     , '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem?

I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
     LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
          GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
     NOARCHIVELOG
     CHARACTER SET ZHT16BIG5
     NATIONAL CHARACTER SET ZHT16BIG5
     DATAFILE '/sisdev04/dbs/system01.dbf'
          SIZE 210M AUTOEXTEND OFF
     , '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem? i think you have specified 1050m for users01.dbf file, your file system /sisdev04 has something like
1.5gb of free space. it failed because of lack of free space. may be you can reduce your datafile size or try to
create in another filesystem.

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an er

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?

its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed

Batch processing files

my question might come a something simple to most of you, but it has stumped me so far.
i have ~1900 files that i need to run PDF Optimize on and have them set to Low Resolution. i have created a batch process in acrobat to do this, but there is one thing that is holding up this process: i have crop and trim marks on the original files. i need to make these files exactly Letter size and remove the crop and trim marks, but so far, i have not been able to figure out how to remove them.
unfortunately, i need the originals to keep the crop & trim marks for a client of mine, but the low resolution pdfs need to be page size only. and i really don't feel llike sitting here while indesign runs through another ~1900 files to make low res pdfs; thats just silly.
so any and all help that you masters of acrobat could help me with would be appreciated. thanks.

Check out Switch:
http://www.nch.com.au/switch/

Error While Processing FIle adaptor

Folks,
I am getting this error in SXMB_MONI while processing file-to-file scenario. Actually Queues are choking up and when they are reprocessed automatically I get this following error.
<b><?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID d0137100-ec77-11db-8fb4-001143eeb19b(INBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPRXIDB.SYS_C00114754) violated</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>N</SAP:Retry>
</SAP:Error></b>
Thanks,
Manish

Folks,
I am getting this error before reprocessing the message
<b>xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://rapsapxi:50000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://rapsapxi:50000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://rapsapxi:50000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br>Connection timed out (-5) <br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Mon Apr 16 19:06:59 2007 </td></tr> <tr><td>Module:</td><td>icxxthr.c</td></tr> <tr><td>Line:</td><td>2551</td></tr> <tr><td>Server:</td><td>rapsapxi_RXI_00</td></tr> <tr><td>Detail:</td><td>Connection to partner timed out after 60s</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error></b>
Thanks,
Manish

ERROR PROCESSING FILE "5016: A mandatory data element is missing"

B2B errors while processing file, following is from b2b.log...
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A0101461190FFFF40D0000017918FE0-1</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5016: A mandatory data element is missing.</errorText>
<errorDescription>
<![CDATA[Machine Info: (falken8.falkentire.internal)
Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 1{br}{tab}Character: 105 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
<parameter name="InterchangeTrailerControlNumber" value="000000862"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeTime" value="1205"/>
<parameter name="InterchangeUsageIndicator" value="P"/>
<parameter name="ErrorScope" value="Interchange"/>
<parameter name="SubelementDelimiter" value=">"/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="InterchangeSecurityInfo" value="Y "/>
<parameter name="InterchangeReceiverQual" value="12"/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="ElementDelimiter" value="*"/>
<parameter name="InterchangeComponentElementSep" value=">"/>
<parameter name="InterchangeControlVersion" value="00401"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="InterchangeSenderQual" value="08"/>
<parameter name="InterchangeReceiverID" value="6262810170 "/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="InterchangeDate" value="080321"/>
<parameter name="SegmentDelimiter" value="
"/>
<parameter name="InterchangeControlNumber" value="000000862"/>
<parameter name="InterchangeAuthorizationInfo" value="X "/>
<parameter name="InterchangeSenderID" value="9252671859 "/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
</errorDetails>
</Exception>
We are using EDI X12 over generic exchange. I double checked ecs file and data file. Passing all the mandatory elements. Also checked the delimeters and they match from datafile to setup.
Anyone have faced this error before? We opened a SR with Oracle and they are not able to figure it out. Please help.
Thanks
Venkat

Ramesh,
To give you a little background I used Spec Generator functionality to create ecs from dat file. Then I did an export to OracleAS Integration B2B format which generated xsd file. I also analyzed (using preprocessor) giving both ecs and dat file and it passed with no errors.
Following your suggestion I now excluded ISA/GS guidelines from the ecs file, exported to xsd and tried to process the dat file, and it gives following error messages now...It doesn't even identify the trading partner now. Please advise. Thanks
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2619)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1365)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)

'processing file' for downloaded items.

I have been trying to download a TV show for a couple of days now and all it keeps saying is 'processing file'. Why isn't it downloading completely?

I'm having similar issues, but I noticed that only certain artists seem to cause the problems. My wife recently bought me an iPod so I went and bought a series of albums by 4 main artists - Pink Floyd, Rush, Jethro Tull and Metallica. All songs by Pink Floyd and Jethro Tull are experiencing long (~5 mins per song) "processing file" delays, none of the Rush and Metallica songs are. This leads me to believe it may not my PC, as I would think all files would have the issue rather than just some. The download speeds are normal, i.e. 15 seconds or so, depending on file size. Also noticed my CPU utilization was pegged at 100% while processing these 2 problematic bands, fluctuated at 30-60% for the others.
Edit: I upgraded to iTunes 8 tonight after I'd already downloaded some songs using 7, only had the problem after the upgrade to 8.
Message was edited by: inoob9170

ITunes library doubled in size!!! help!!!

I dragged an older but more update iTunes library from my external HD to my iMac's regular itunes library. went over without any issues. BUT now the problem is my iTunes library is doubled in size but can't find any duplicate files. It's like everyfile is twice the size. My itunes library is now over 100gigs..where it was right around 45ish gigs before. This wouldn't be a big deal if I could find the duplicate files..but they are just not there for me to delete.
Thanks for any and all help!!!

Hey I have the exact same problem, were you able to figure out what it was?
Renée

How can I batch process 4 diff image sizes from 1 master?

Hi there
What I would like to do is create 4 separate image files of varying sizes (large, medium, small & extra small) from one master image. I would need the ability to name each file individually too, ie. picture1_large, picture1_medium etc
I have a few thousand files to process so ideally a solution that I didnt have to keep checking on would be preferable. I know I can create a batch process for one size but its creating the four diff sizes in a batch which im finding difficult to work out.
any help would be much appreciated
Jim

Simply drag the entire folder through Bridge—or even individual files—the invisible xmp files containing your adjustments will automatically and invisibly travel along with the image files, as long as you do it within Bridge, not through the OS.
Otherwise, you would need to set your Mac OS to always make invisible files visible, and you don't want that hassle.
Just use Bridge to move files around or to copy them to a new folder.
Incidentally, there's a dedicated Adobe Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions

Apps stuck on "processing file" in 11.1.3.8 for Windows

I don't believe that this was a problem 100% of the time since I downloaded 11.1.3.8 for Windows, but I am noticing that recently, most times the software hangs during the "processing file" portion of updating any app.
If I go into task manager and kill all iTunes processess and restart iTunes I can occasionally get smaller apps to update individually if I run the update process quickly after restarting, but once iTunes has been running for about a minute everything that I attempt to update hangs.
I can update the apps on my iPhone or iPad and sync them to succesfully update the apps on my computer/in iTunes, but downloading them hangs.
I've seen other people complaining about it here so I know it's a legitimate issue, my question is -- can anybody confirm if this is software based in 11.1.3.8 or if this is something on Apple's end where the downloaded software pings their servers for verification during the 'processing file" portion of the update?
Thanks for any info that anybody has!

I have the exact same problem and I am experiencing this since last week. My problem is-
When I try to download/purchase an app using iTunes, it immediately starts downloading. Ideally, download starts and finishes in sometime, depending on the file size. In the last stage of downloading, iTunes tries to process the downloaded file and places it in the '...\Music\AppSync\Mobile Applications' folder in my case. The problem I am facing is that sometimes file never completes downloading and gets stuck. Download reaches 100% then iTunes shows 'processing file' and it gets stuck there and never completes. This means that downloaded ipa file never added to the 'Mobile Applications' folder. Even if I try to delete the download, iTunes does not do anything and then I have to kill the iTunes process manually as it does not even quit by clicking on the cross icon. After killing the iTunes process using task manager in windows, I restart iTunes and go to my purchase history to start downloading that app again. Sometime it succeeds otherwise it gets stuck again and I have to repeat the process of killing iTunes and starting again. But after several attempts, it does get downloaded. Also, note that this does not happen all the time, mostly randomly. If I am trying to download 10 apps for example, it will get stuck in 1 or 2.
This problem comes both updating and downloading new apps. I have not found any solution for this yet. I am following up with iTunes support but all they can think of is to reinstall iTunes.
I have latest version of iTunes and it is running on Windows 8.1. The iTunes account country is USA.

F4vpp processed files double in size?

Similar Messages

Maybe you are looking for