F5842- balances in currency type

Can somebody please quickly help me out.
I am entering transfer posting with transaction OASV and and the error F5842 is stopping me from carrying out the posting. It says as follows
<b>Balance in 1 currencies</b>
Message no. F5842
Diagnosis
Balances have been found in 1 currencies with the following details:
Currency type Amount Currency
30 0.01- USD
(A maximum of three differences are listed)
System Response
The prerequisite for posting a document in financial accounting is that the balances for all currency types are zero.
Procedure
This is a system error in the calling application or the FI/CO interface.
Please help quickly if you know how I can proceed.

Hi Jeyakanathan,
Thanks for fast response but the problem is I want to display whole balance of GL in currency USD.Document currency just shows me what all postings done on this GL in USD but not the whole balance.Can you help me in this?

Similar Messages

Balance of F.01 and FS10n is different, when currency type is 40

All GL Balance from F.01 and FS10N is different for year 2009 and currency type 40, But for year 2008 and currency type 40 all GL balance is match. and if currency type is 10 and 30 all GL balance is match in any year.
thanks every much, if someone help me to resolve it.

Hello,
Actually, you should get the same result.
The possible cause why you have different results can be that you didn't run the balance carry forward (f.16) for ledger ?? (currency type 40) for fiscal year 2009.
You can checl this in tables t881 and t882.|
You can run it even with year 2008 closed. There is no risk, no data is changed in 2008, only the balance carry forward is transfered to the new fiscal year 2009.
I hope it solves your issue
Best Regards,
Vanessa Barth.

MIRO M8 285 (Balance in currency $, currency type $

hello
we have some problems on our system
We use Transaction MIR7 or MIRO to enter an invoice document for planned delivery cost with reference to purchase order. In Detailes Tab, at the addition of unplanned delivery costs, at the header of the invoice, the system displays one of the following error messages, when we try to simulate or post the invoice document:
M8 285 (Balance in currency $, currency type $), M8186 (Balance is not equal to zero) or RW022 (FI/CO interface: Balance in transaction currency).
We have already filled the missing entries in table T169A,a s per note 1319322.
Do you have any ideas on what should we do to avoid this error?
Thank you very much

Hi
CAn you please copy paste entire error ,
It seems like you havent taken all the amounts in concideration
check the tax code for unplaned delivery cost and calculate tax ticked

Balance in currency USD , Currency type 10 error in MIRO

Dear Gurus,
While simulating MIRO , I got an error like "Balance in currency USD , Currency type 10" . I search SDN and get some notes and update the same too in SAP . But still the error appears as before.Please suggest.
Thanks

Dear All,
My Gr/IR account is in local currency . i.e..INR
My invoice is in usd. and I want to post the MIRO in USD . My vendor's currency is in USD. In spite of all this the system is not saving the voucher.Please suggest, what to process.

Gl balances shown in FS10n but not shown in F.01( Currency type:30)

Hi gurus,
When i run F.01,currency type :30(group currency),GL balances is not showing.But when we run FS10,the GL balances is showing in USD as well as INR.
I have maintained OB22.
Pl advise.
Regards,
Samar

Hi gurus,
Thanks for your reply.
I am maintaining group currency 30 ( USD).I have maintained in OB22.Company code currency is 10 ( INR).
In GL master(FS00),I have not ticked "only in local currency).I have kept it blank.So that the system can pick up INR as well as USD
After maintaining all these,still GL balances is not showing in F.01.Is there any t code for said issue.
Kindly advise.
Regards,
Samar

GL balances appearing in FS10n(Currency type:30),but not in F.01

Dear Gurus,
I have run report in FS10n and found GL balances are coming in USD.But when i run F.01,Currency type:30,i found that no gl balances are coming.
Pl advise.
Regards,
Samar

Hi,
Thanks for your reply.
In F.01,I put data in following areas(SAP version:4.7):
1.Chart of Accounts : CIL
2.Company Code : 6000
3.Currency type :30
4.Financial stt version: 9002
Then i am running f.01 and found no balances is coming.
Kindly advise.
Regards,
Samar

To get GL account balance in Group currency ( currency type 30 )

Hi All,
I'm Using BAPI_GL_ACC_GETPERIODBALANCES to get GL account balance for a period. But it is showing output only when the currency type is 10 (Company code currency), I need to get the output in Group currency ( currencytype 30 ). Is there any function module to get the GL account balance for a period in group currency.
Thanks & Regards,
Sabu

An example,
Select * INTO TABLE gt_FAGLFLEXT
From FAGLFLEXT
Where
     RBUKRS = companycode AND
     RACCT = GLAccount AND
     RYEAR = fiscalyear .
GL Balance in group currency of fiscal period 004 is equal
     FAGLFLEXT-KSLVT +
     FAGLFLEXT-KSL01 +
     FAGLFLEXT-KSL02 +
     FAGLFLEXT-KSL03 +
     FAGLFLEXT-KSL04
Regards,
Loan Le.

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

CALCLATED KF SHOWING DIFFERENT VALUES FOR DIFFERENT CURRENCY TYPES

Hi Experts
When I am executing the query( On a Multi provider) with the selection of Company code, controlling area, WBS ELEMENT, currency type I am seeing two different values (XXXX EUROS and YYYY EUROS)for a formula for total variable cost when i select two different currency types( CONTROLLING AREA AND GROUP CURRENCY)
I have two currency types called CONTROLLING AREA CURRENCY and GROUP CURRENCY(BOTH IN EUROS).
This WBS element is not having any sales document.How can I see the exact value for this WBS element in the R3 side.
Is there any possibility that the same dataelement TOTAL VARIABLE COST have different values when i execute with differnt currency types in the selection screen.
In what approach can i proceed from R3 side to the query to solve this issue. on the R3 side when i see in FB03 (settlement posting) for this WBS it is balanced. I am seeing only partial posting for this in the Query
Could any one help me to solve this.
Thanks in Advance
Best regards

Hi Rajesh,
I guess the holiday which was configured in Holiday calendar (Holi) is not declared as Paid holiday in Public Holidays-Holiday Calendar.
Goto SCAL - choose Public Holiday - change mode - look for the holiday (Holi) configured - change mode again - lookout for 'Public Holiday Class' and see whether ' 1 ' is maintained there, if not maintained, type 1 there and save it.
PS (1 - Ordinary Public Holiday....i,e paid holiday).
Now go to PT01 and generate WSR. This will sort out your issue.
If the above is not working,
I guess there are different PSA/ESG grouping for the employees and maybe their Holiday Calendar itself is different. check out whether the PSA and ESG grouping in Time Mgmt is same or different for those employees for whom the paid holiday is not getting generated and also check out the Holiday Calendar for these set of employees and try the above given solution there.
Hope this helps.
regards,
Santhosh
Edited by: Santhosh on Mar 31, 2009 11:34 AM

Currency type in COPA report

I created a form to generate a COPA report. I selected "both company code and operating concern currency types while creating the form. Now, I need to be able to give the currency type as variable to have the user print the copa report whatever currency they want to print. It's cost based COPA /
How can I get the currency type as selection option? please advise.
Thanks,
Sri

From the form's general selection, select the currency type and define as local variable.

Currency Type error when releasing billing docs to Accounting

When I am trying to release the billing documents to accounting following error is displayed :
company code ABC has currency type 31. the currency type has the currency key INR in the Fin. Accounting application. The same currency type is conveyed to fin. accounting accross the accounting interface with currency key CAD.
System is also showing the tip :
This is a system error in the calling application. Currency type 31 in company code ABC must have currency key 'CAD' when the data is transmitted.
Please let me know if I have to do anything in Tcodes SCC4 or OB22. Detailed answer will be of help.
Regards
RK

Hi Ravi,
From the discription of the error what you have given what i umderstood is that in FI documents are posted with Currency INR, while the Cur. type 31 is transferring Cur. Key CAD to FI.
Since there is a diff in the Cur the error is coming.
Try to maintain Add. local cur in OB22 and then check.
regards
JS

Error MIGO AA629 Balance for transac type group 10 negative for the area 01

Hi
I have the following principal case in the PRD (version 60.0 ECC):
Active 25000549 number was discharged from the transaction MIGO 18/12/2009 USD 19295.22 and began to depreciate on 01.01.2010.
On 22.04.2010 the vendor issues a credit note USD 11626.96 therefore created the Purchase Order number 9900000903 and when it will account for the transaction MIGO get the error message AA629 ( Balance for transaction type group 10 negative for the are). In transaction MIGO are using the kind of movement 161.
SAP looked in and found a related note the following: 497297, 541200, 547233 but they refer to version 4.7 and 4.6C and make no reference to version 6.0.
The error detail is as follows:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000025000549-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
My questions are: someone has thought of something similar? how to solve? must implement the foregoing notes?
Thank you very much for your kind help

Hi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
     internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899   AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction   group 10 back to its original definition.
Regards Bernhard

Currency type 10,30 and 00 need to extract data from R/3 to BI

Hi Experts,
I am working ECC6.0 version with BI 7.0,
I have a issue, when I extracting data from R/3 data source (0FI_AP_3) only currency type 10 comming but I need currency type 30 and 00 also....
when I check in data source abap code it was hard coaded with 10 currenly only,
can any help me to provide your inputs how currecy type 10, 30 and 00 also come to BI.
Regards,
Vijay

Hi Vijay,
0FI_AP_3 is Account payable -Actual line item data source, which was used for fetch actual vendor posting data.
If you are looking for planning and budgeting data then you sud go for 0FI_AP_1 / 0FI_AP_6 / 0FI_AP_7 based on your requirement.
Kindly let me know if you have any question on this.
Regards,
Ashish

Report on Purchase Order , Currency Type Wise

Hello Gurus,
If i want to display a list of purchase orders , with respect to Currency Type (for eg: INR,USD,SGD,GBP,SEK)etc , how to go abt.
Help is highly appreciated
thanks and rgds

Hi bw,
If you use one of the LO datasources, 2LIS_02_HDR for example, then it has a PO currency. If you upload PO data and have PO currency attribute in your cube then you'll be able to report on POs by their currencies. What's your problem?
Best regards,
Eugene

Change Currency Type in Controlling area

Dear Gurus,
We have the following settings in the customizing:
1 - OKKP - Currency Type 20 and Currency key "USD"and flag "Different Company Code Currency is Allowed" set;
2 - Object Currency WBS "10 Company code Currency" "BRL";
3 - OB22 - Currency Type 1st local currency "10 Company code currency -
BRL" and 2nd local currency "40 hard currency - USD";
We would like to change the Currency Type in OKKP of "20 Controlling area currency" for "40 Hard Currency" without modifying the currency key.
That impact this modification can be generate if in the Production System already exists real postings and Settlement to FI-AA?
Thanks,
Elza Silva
Message was edited by:
Elza Aparecida da Silva

SELF Solved.
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Aug 12, 2010 10:44 AM

F5842- balances in currency type

Similar Messages

Maybe you are looking for