F9/F10/11buttons

Currently my F9 - F11 buttons do not mute or change the volume but change spaces. How do I get them back to volume control?

read this
https://discussions.apple.com/thread/3656300?tstart=0

Similar Messages

How to connect my Qosmio F10 to the TV?

Please help!
How do I connect my Qosmio F10 laptop to the TV?

Hi
Did you check your user manual?
There you could find a useful informations and details about your notebook features and how to connect it to the TV!
Check this!
One hint; you have to use the s-video out port ;) then you could connect the TV with the s-video cable.
Bye

How to connect a plasma panel digitally to Qosmio F10-130

Hi,
I just orderer the F10-130 and I would like to connect my plasma panel with a digital video signal. The monitor has a DVI input, and the F10 has a so-called "D-Video out" interface that I've never seen before. What's the best way to connect the two devices? I know that VGA Sub-D or S-Video should work, but IMHO this is not state of the art. Does an adapter D-Video to DVI exist?
Regards,
Marsu
[Edited by: admin on 14-Mar-05 21:12]

Hi marsu
D connector port on Qosmio you can connect to SCART port on TV. The cable is provided with Qosmio notebook. Sorry but I think there is no possibility to connect it to DVI port on your TV.
Only thing that you can do is to ask some experts in electronic store if there is some solution for this issue.

Qosmio F10-103, Unmountable_ boot_ volume.......what can I do??

Hi,
I have a Qosmio F10-103.
One day ago the blue page with
the writing ''Unmountable_ boot_ volume''
appeared!
What can I do?
I red on some forums that it (could) be
a problem of the Hard disk and that
I could repair the cpu using the
windows xp boot cd , copying the files
boot.ini , NTDETECT.com , NTLDR ...but.....
Toshiba gave me only the DVD-rom backup,
not xp boot.
Then I tried to use that DVD end I entered
into the Toshiba Recover Utility 1.0.1.0
and I had a disk checking.....the result was:
''Application error 29004
Read sector failure, result =1, drive=128, sectors
132479 to 132481 if the problem persists contact toshiba....''
Here I am!
It's useful to say that all the modes of booting
windows doesn't work.
Also, the ''look-like dos prompt'' that appears
once exit from the recover utility doesn't permit
to copy the file I need from the DVD.
What can I do???
Is there something to do before......the formatting
procedure??
Thanks a lot!!!!!

Hi,
it seems that your Qosmio has a corrupted windows. Like you wrote you can copy the missing or corrupted files from another media. It's right, the Toshiba recovery CD/DVD contains only an image and is a OEM version!
But you can copy these files also from another PC or Notebook. Then take a boot diskette and boot the Notebook. Then copy the files in DOS mode and try to reboot. Then it should work again!
Bye and Good Luck
Rudi

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hi, did you upgrade the OS lately?
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

I had to buy a new keyboard but F10, F11 & F12 don't work for the volume. What can I do to activate it?

I had to buy a new keyboard but F10, F11 & F12 don't work for the volume. What can I do to activate it?

Hello,
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

How do I get back my tool bar on the top of screen without pushing F10

I lost the tool bar showing File- View-History- Bookmarks -Help.... across the top of my screen. How do I get it back without having to push F10 each time to show it?

View > Toolbars > Menu Bar = click on that item so that it has a check-mark

Distorted video-out signal on Qosmio F10

Hi,
Up until recently my video-out function on my Qosmio F10 worked just fine. When I connected my laptop to the TV the other day, using a s-video cable, the picture had turned quite distorted. The picture on the TV flickers and sometimes disappears totally.
My laptop has the Nvidia GeForce FX Go5700 graphics card and I have changed no settings what so ever from the point in time when the video-out was working properly.
To debug I've bought a new s-video cable and also a scart-adapter. Using these I've eliminated that the TV's s-video in port is the problem. It seems to me as if something is wrong with the signal from the graphics card.
I'd be very grateful for a diagnose on this issue.
Thanks and regards,
Johan

Hi,
I've made sure that I use the latest drivers (although the ones that Toshiba provides are not exactly brand new!). I've also made sure that I use the correct TV-format (PAL-B in my case). Furthermore, I've tried both using the s-video port on the TV directly and also using a scart adapter... The result is still the same...
I'm inclined to believe that there is something wrong with the hardware (e.g. a loose contact in the s-video out port). In that case i guess this might be a warranty issue...
Rgds,
Johan

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

I need to get into the Bios of my p6112p, when I hit F10 it says entering the configuration &doesnt?

I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks
rebelthepit

rebelthepit wrote: I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks rebelthepit
Hello reblthepit, HP systems are a bit picky about what memory will work in a HP system.
You might want to go to Crucial.com and run their memory configurator and let Crucial advise the memory that is certified compatible with your system. This takes the guessing out of trying to purchase memory that is supported for your system.
Just because the motherboard will boot the start of the bIOS does not neccessarily tell you a lot. If you had some memory issues, and no memory was recognized by the BIOS, you would be getting some beep error codes.
If the motherboard was not a genuine HP Provided motherboard, it will not work with the HP provided operating system. You would need to purchase a new operating system.
You also could not just replace the motherboard and try to start the system without a new installation of the operating system. There would just be too many driver conflicts.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Question about F10 mapping in Tom W. training video

I started going through Tom's FCE4 HD training video yesterday and there's a part about mapping the F10 key so that it will insert a clip into the timeline. It appears the video was an earlier version of OS X because my system doesn't do the expose action on F10, mine toggles the sound on/off. Also the icon in the video where he makes a change to the key doesn't exist anymore. What I have in system preferences is something called expose/spaces so I looked there since the one he was using also had expose. But changing the F10 to be Option F10 there didn't seem to have any effect.
I've only had the Mac a week so I'm not familiar with how all these key mappings work and are assigned but I will be quick learner.
Thanks for any help if someone can tell me where I need to make this setting change.
Gil

You have one of the new aluminum keyboards which are similar to laptop keyboards. The DVD was made before those keyboards were widely used. There was a mention I thought about using laptop keyboards. Go to the Keyboard section in System Preferences and in the keyboard panel there is a check box you have to click on. That will activate the F keys for application use. To raise and lower the audio or do other keyboard functions assigned to them by the OS, you have to hold down the function key, which is marked FN.

HT1310 why my volum key doesnt work f10

All my top line in the keyboard is not functioning as what its suppose to like f12 , f11, f10 i cant but the volume high or lower

not sure what you're saying - F10 = Mute, F11 = Lowers the volume and F12 = increases the volume.
if none of those work - try doing a SMC RESET or a NVRAM/PRAM RESET and see if that sorts it out for you.
more than likely, you need a NVRAM/PRAM RESET.
Good luck.

"Command + F10" in Premiere Pro

Does the "command + F10" or "command + F9" known in FCP (that Overwrite/Insert sequence content) exists in Premiere Pro ? http://lfhd.net/2010/05/26/fcp-tip-cutting-in-footage-from-another-sequence/

I'm not sure I fully understand (given the difference in nomenclature), but I think this is what you're talking about.
http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html

Some keys of keyboard like t ,y f10 not working in my hp pavalion g series

sir,
plz give solutions for my hp pavalion g series laptop some keyboard keys like t ,y and f10 not working .
thamking you
Aamir Khan

Hi,
Can you provide the full model number for your laptop? If you don't know the full model number, see The HP Guide To Finding Your Product Model Number.
Also, what Operating System are you using? Windows 7, Windows 8?
I've provided some links below for Windows 7. First do a hardware test and see if the keyboard is functional, see Testing for Hardware Failures , and look under Component tests and do the keyboard test. If there is a problem with the keyboard that requires service, it should come out in that test. Also take a look at Notebook Keyboard Troubleshooting, and since you are having problems with specific keys, look at the Stuck Keys section, and try to reinstall the drivers which is the last section of that document.
Good Luck,
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Qosmio F10: Monitor screen looks like an Andy Warhol picture

I am currently having problems with my monitor screen looking like an Andy Warhol picture. I have resorted to going through the Product Recovery DVD-ROM for my Qosmio F10/G10 Laptop in the hope that reverting it back to the factory settings would solve the problem but it hasn't.
The screen breaks down after the Windows welcome screen, leaving me with my desktop all Andy Warhol like (i.e. blocks of pixilated colour at the edges of the graphics). I have tried to reset the resolution which solves the problem to an almost acceptable level but on a temporary basis, because the problem re-appears again when I re-boot the laptop.
I think that it is something to do with the Windows Multimedia Operating system that was preinstalled on my computer (so no recovery disc). The reasoning behind this assumption is that I put a DVD film into the Multimedia that is part of Windows XP and the film is a moving Andy Warhol video.
I put the same DVD into the WinDVD that came as a Toshiba additional content and the DVD is perfect! My reasoning is, that if there was something wrong with the hardware of the Laptop, then all DVD reading programs would react the same way, but as they do not, it must be a programming (or operating system problem).
Am I on the right lines? Is there a way to solve the problem via a downloadable file?

Thanks guys for your replies, sorry if my question is confusing, but I couldn't think of any other way of describing it without the use of a screen dump to show you.
At the moment I haven't got another monitor to try, even though this looks as though it would have been the easiest option. I shall start asking round to see if I can borrow one to eliminate that variable.
However I will try to reinstall and to update "Graphic Drivers" to get rid out of this display problem.
Thanks to all.

F9/F10/11buttons

Similar Messages

Maybe you are looking for