Fabric Extender and Blade server connectivity(Cabling)

Hi,
There is lot of information available about how a Fabric extender connects to the Fabric interconnect. e.g. SFP+ ports, cabling etc.
I am bit a confused, how does connectivity happen between the blade server and fabric extender inside the chassis.
The information available only gives us idea about the possible network cards in the blade servers.
I want to understand, how actual connectivity is done between the blade servers and fabric extenders.
Is it through some cables or anything else? Please help.
Thanks,
Sushant

Hi Sushant
This has been discussed before
https://supportforums.cisco.com/discussion/12130401/vnic-bandwidth-question
https://supportforums.cisco.com/discussion/12207581/m81kr-vic-1240-and-vic-1280
https://supportforums.cisco.com/discussion/11897266/vic1240-and-2208xp
https://supportforums.cisco.com/discussion/11500981/vic-1280-vs-vic-1240-port-expander
https://supportforums.cisco.com/discussion/11900386/10g-between-adpater-and-blades-vic12401280
https://supportforums.cisco.com/discussion/12321671/ucs-enabledisable-dce
Cheers
Walter.

Similar Messages

IBM WPS: Error While Creating App and Int Server Connections in JDev 10g

Hi,
I have been struggling to create App Server and Int Server connections in JDeveloper 10.1.3.4 without any luck.
The JDeveloper is present on VM ware machine from which I'm trying to establish the connections to remote server where SOA Suite 10g is installed on IBM Websphere.
My Settings:
App Server:
Connection Type: Standalone OC4J 10.1.3
RMI: tried WC_defaulthost port, 6003, RMI default port (How do I get the actual value of RMI on IBM Websphere and does this really make a difference?)
Connection test fails with Mbean error. Ignored this error as documented in Installation guide.
Int Server:
Used the above App Server connection, gave the http port value of 9700 (also the WC_defaulthost on IBM Websphere)
Connection test fails for App Server, BPEL PM Server and ESB Server.
I have gone through other threads where different workarounds were suggested but none of them worked for me. The workaround of adding the property ipaddr with the value 0.0.0.0 in opmn.xml doesn't hold good here as IBM WPS doesn't have OPMN.
Please suggest a working solution for this issue.
Regards,
CC

The below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option?

Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost. How can I fix this?

Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost. How can I fix this?

Note For others.
For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
9:41 PM Friday; October 28, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

Hello folks
I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
I solved the problem according Alley_Cat mentioned and described in link bellow:
In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
Follow the steps carefully described in link bellow
Good luck.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Blade 6000: X6270M2 Blade server connection to StorageTek SL48 SAS

Hello,
My customer is willing to put the following configuration together :
- Blade 6000 Chassis
- X6270M2 Backup server (running Oracle Secure Backup) connected to SAS SL48 and connected to Exadata 1/2 rack via Infiniband
Can you please help me to identify the required components to have on the Blade 6000 and the modules on the X6270M2 Blade Server.
Your help would be much appreciated,
Best Regards,
Youcef

have you ever check the installation guide of Blade 6000 ? it will give lots of clue and compatibility list about components on system:
http://download.oracle.com/docs/cd/E19938-01/820-0050-11/820-0050-11.pdf

Timed out and losing server connections.

Hey
for the past month i have been having problems using Ichat. I seem to be constantly timed out or lose server connections. I'm not very technical so sometimes looking at computer jargon makes my brain fuzzy!
I have changed the port to 443 and its still happening. I have a belkin router and BT is my isp.
It worked fine before (besides having to have a few attempts at voice connections before finally getting there)
It seems to drop connection often and its the whole net usage that is affected, it seems to drop then reboot itself and when logged on to ichat i have to manually sign out and back in again, then i get the message saying i'm connected in more than one location.
Last night it happened roughly 20 times in a three hour period, yet this morning its only happened on a few occasions.
I'm not totally sure what version i am using (like i said i'm a technophobe) all i know is my macbook is a year old. Nobody else uses the internet other than me.
Any help would be great.
Thanks
Any help would be great.

Hi,
In this case a Server is normally something that distributes (Serves) an Internet Connection onwards to several other devices.
A modem can be a cable modem and not specifically serve as such and a router is needed behind that to "serve the LAN" as it were.
More specifically a Router or routing device such as a modem that routes will have a DHCP Server that automatically dishes out IP addresses (numbers) to the computers and other devices attached.
In Most devices the DHCP server can be turned Off but then the Computers have to be set to Static IPs (Manually in the Mac Network Preferences).
It takes very small breaks in service either in the routing device itself or from the ISP for iChat to notice.
Although most people think off Mail and Web Browsing to be Always On they only use the Connection intermittently when you get or send mail or change a web page.
iChat is communicating with the AIM Servers (Or Jabber/GoogleTalk) all the time so that you get a instant update to your Buddy list when people come and go Off line.
9:32 PM Monday; April 13, 2009

Oracle and SQL Server connectivity

Hello,
Currently, we use Oracle as our enterprise database. I have a new requirement to develop a new application that must use MS SQL Server which must push and pull data from the Oracle database.
What is the best technical solution to have this communication between Oracle and SQL Server.
Thank you.

if you are connecting to SQL Server from Oracle then yes HS through ODBC (check HS forum), but if you are pulling data from SQL server you have an option of DTS or "shared" server through ODBC, see MS documentation for that......you won't find it on oracle forum......
Eugene Roytman

LiveCycle PDF form and SQL Server connection

I'd really like to move from a server-scripted event registration form to a LiveCycle online PDF form, submitted by email and redirecting the user to a Webpage.
The only obstacle I can see is a dropdown list of users, where a user selects his/her name and then proceeds to choose an event, date, and time. On my
Webpage form now (scripted in ColdFusion), I use a CFSELECT, which works perfectly. But in looking at LiveCycle, I see that it supports an OLEDB but probably
not a connection to SQL Server or Oracle. Am I correct? Or is there some workaround that will populate my dropdown list?

Hello!
Download jTDS - SQL Server and Sybase JDBC driver from http://sourceforge.net/project/showfiles.php?group_id=33291
In Oracle SQL Developer open Tools -> Preferences
Database -> Third Party JDBC Drivers
Add Entry
Browse the unzipped driver and add the jtds-1.2.jar file
emeriqus

Oracle SQL Developper and SQL Server Connection

Hello
I try to connect to a SQL Server 2005 Database under Oracle SQl Developper but I always obtain this error :
oracle.jdeveloper.cm.CMException: Unable to find driver: net.sourceforge.jtds.jdbc.Driver
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:164)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:191)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:66)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:781)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:654)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
     at java.lang.Thread.run(Thread.java:595)
I download the jtds driver. Where should I extract it on SQL Developper Folder.
Thanks a lot
Best regards
Stéphane

Hello!
Download jTDS - SQL Server and Sybase JDBC driver from http://sourceforge.net/project/showfiles.php?group_id=33291
In Oracle SQL Developer open Tools -> Preferences
Database -> Third Party JDBC Drivers
Add Entry
Browse the unzipped driver and add the jtds-1.2.jar file
emeriqus

JDeveloper and Application Server Connection

Hi all,,
I want to make a connection to application server(APPSRV) on another computer from my local computer.
While creating the connection, i want to enter the opmn port. But how can i find the opmn port from application server web browser?
And another issue is,, while making connection to the application server on another computer, will i enter the a "remote opmn port" or "opmn port" which are
determined installing the soa suite?

You are mixing versions.
JDev 11g needs the 11g SOA version (download from here )or use JDev10g together with Oracle SOA Suite 10.1.3.1.0
Timo

Icloud " terms and conditions" server connection

"unable to connect to server" for accepting icloud terms. contacts & calendar will not load on iphone.

Try this
Enable the cookies in safari browser..
Setting>Safar>Block Cookie>Never
Then open the app store and accept new terms and condition of iTunes store. it it's show "Agree" button below right end.

Netgear Router AE as an signal extender and print server

I have a new wireless router(Netgear WPN 824) and a new AE and cannot get the AE going either as print server (HP PSC1500) or signal extender.
Thanks,
REcloser
PowerMac Mac OS X (10.4.6)

Hi RECloser and welcome to the Discussions
You can't use the Airport Express to extend a Netgear wireless network as Netgear routers do not support Apple's implementation of WDS.
However you can use your Airport Express as a client on your Netgear network as a print server.
You need to configure the Airport Express to join an existing wireless network.
However there may be an issue with your printer.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://www.ifelix.co.uk/tech/1300.html
Using the HPIJS drivers.
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-PSC1500
iFelix

Mail and Gmail - server connection issues

My wife uses her Mac Mail to manager her Gmail account. She frequently gets errors where Mail cannot connect to the Gmail server. Sent mail sits in her outbox for hours and every time Mac Mail tries to send it she gets the 'cannot connect to Gmail server' error. After a time it connects and goes.
I have tried setting it up as IMAP and POP. No good.
Any ideas?
Thank you.

I've noticed the same problem. I'm moving to an area where my isp is not (no earthlink hi-speed in Marietta, GA :P) and thought it wise to switch my primary email to a free account. I'm debating if gmail is worth this hassle.
However, Google's support suggests clearing the CAPTCHA on the account, which is the challenge-response test used to determine if the user is human (it's usually a squiggly string of text or numbers you have to enter). This is odd, but I suppose makes sense if it's part of every gmail account. You can find how to do this in their help section.
worth a try anyway.
DB

Ovi Suite and Map Server connection error when beh...

Hi All,
from many recent versions up to the latest 3.1.1.80 I have problems to connect to the map server when behind a proxy. Ovi Suite correctly access to internet and log on (I've set-up proxy access data in the options menu) but when I access to the Maps tab I receive the massage "MAp Server not available".
Now I've understood the reason and for nokia guys it should be very easy to fix the problem:
if my proxy username is in the format "name surname" Ovi Suite access to internet but Maps DOES NOT.
if my proxy username is in the format "username" (without spaces) BOTH ovi suite and Maps WORKS correctly.
Please FIX it, it should be very easy.
Thanks,
AleC

Hello, 1. Were you able to use the usb connection if present? And also, make sure you have the correct drivers, if present, installed (use a device manager to check). 2. Most probably, your printer was not properly connected to the network. You need to check IP configuration. If a wireless router is used, make sure there is no MAC filtering enabled. If enabled, you need to reconfigure. 3. DHCP Service. 4. Check the network test page and make sure ssid is correctly identified. And the rest of the wireless parameters. 5. Make sure your firewall does not blobk printer connections. Make sure file and print sharing has been turned on for the appropriate network with network discovery turned on(Network and Sharing Center if Windows). Network connection should be work not public (Windows only). More assistance: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=... Thank you!

ITunes 10.6 and proxy server connection

Hello,
I was using iTunes, in a network enviroment with a proxy server, since yesterday when I updated it to 10.6 version.
Troubles began...
My IE settings about proxy server are correct, and my network admin did not change anything in out proxy configuration. Thus, I checked IE proxy settings, and they are ok (http://support.apple.com/kb/TS1470). Restared my PC, but iTunes after the login to my proxy server (NOT with appleid of course but with my network account - and it's works, I'm sure about it) cannot go on, with a 12002 error.
So, IMHO iTunes 10.6 proxy support is broken...

Ok...here's a workaround for Windows based computers. Not an ideal solution but it works. For those of you on a corporate network, I highly suggest you get this approved before you implement it.
You will need to download and install Cntlm Authentication Proxy. The link is...
http://sourceforge.net/projects/cntlm/files/
Once installed...find the cntlm.ini file located in the c:\Program Files or c:\Program Files(x86) folder and open it with notepad. Modify the following lines to match your network/proxy configuration...
Username
Domain
Password
Proxy
Once you save the cntlm.ini file go to Services and start the Cntlm Authentication Proxy service...or you could simply restart the computer.
The last step is to configure your browser to use the following address as a proxy server...
127.0.0.1 port 3128 (3128 is the default listening port used by cntlm and can be changed in the cntlm.ini file)
As I said, this is not an ideal solution as your network username and password are stored in the cntlm.ini file as clear text and if you ever change your network password you will need to change the cntlm.ini file as well. This is also why I suggest that those of you on corporate networks get approval for this before you install since this is a potential security risk. But this does resolve the proxy authentication pop up issue with iTunes and for anyone attempting to use Dropbox and having similar proxy issues this solution works for Dropbox as well.

Fabric Extender and Blade server connectivity(Cabling)

Similar Messages

Maybe you are looking for