Fabric pattern printing fingerprint like lines

Hi all, Im printing a file that has multiple images within it. The file is a PDF created out of indesign. the images within indesign are PSD's and High Resolution. When printing this file  at work on a konica minolta bizhub, everything is fine. I take it to the professional printer and just 2 of the 12 images appear with what im going to call screen lines..? Im sure theres another name for it. Ive seen these lines before on the screen and if u zoom in they disappear. The image is doing this over a fine fabric pattern. I feel like its a problem when their printer is ripping the file...? or is it in the image and my printer doesnt have as much quality and misses these?
This is very frustrating, Ive attached a file to show the effect thats printed on both my printer which is ok and theirs which isnt.

try:
Go to Image > Image Size (Image > Resize > Image Size in Elements) and resample to the desired image size and resolution using the bicubic resampling option.
Make sure you are zoomed to 100% magnification.
Go to Filter > Sharpen > Unsharp Mask.
Exact settings will depend on the image resolution, but these settings are a good starting point: Amount 50-100%, Radius 1-3 pixels, Threshold 1-5. Use your eye as the final judge.
Tips:
If you still see a pattern after applying the Median filter, try a slight gaussian blur before resampling. Apply just enough blur to reduce the pattern.
If you notice halos or glows in the image after using Unsharp Mask, go to Edit > Fade. Use settings: 50% Opacity, Mode Luminosity. (Not available in Elements.)

Similar Messages

  • How do I change the spacing between lines in Pages 5.5.2?  Single spacing prints more like double spacing.

    How do I change the spacing between lines in Pages 5.5.2?  Single spacing prints more like double spacing.

    In the Format panel under the Text Style tab, there is a ▸ Spacing category. Click it to open, and you will have a selector that defaults to Lines, and to the right, the ability to set your spacing in decimal values. In addition to Lines, you also have At Least, Exactly, and Between capability. You can even set exact line height  in points. Check that your Before Paragraph, and After Paragraph settings are correct for your needs.

  • HP deskjet printing issue - alternate line cut off and blocks

    Hi guys recently bought a deskjet 3050 and it started printing fine, when i had to print out a large document (roughly about 30 pages) it started to cut out sections of text and replacing them with black blocks.
    now when printing it prints the first line fine then the second line is half missing and some words are replaced with black blocks. then the next line is fine, the next is cut off and blocks again and so it continues.
    it only does this with black ink and not colours.
    anyone know a solution?

    It sounds like the black cartridge has failed electrically.  Try printing a diagnostic page as shown in Solution 6 of the page here.  Does this print properly?  I suspect the black nozzle pattern in the upper right will be corrupted.  You might try removing the cartrdige and cleaning the electrical contacts but I suspect the cartridge will need to be replaced.  You can check the cartrdige warranty as shown here assuming it is an original HP cartridge.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Issue in Printing of FBL1N ( Line Item Display)

    Hi,
    I have an issue with the printing of the report FBL1N...
    When I execute the report with the Standard Layout "1SAP". The dispaly on the screen is correct. But when I tried print the output the display on the print out, excludes the Last Line item of the report & the Total's coloumn.
    But when I try to Print the Formats Created by User's the Output is coming accurately
    Can any one please inform me, what could be the issue, I tried printing of differnent printers, but the output is the same, also i tried adjusting the Rows & columns in Print Settings
    Regards
    Ash K

    Hi,
    When you print the report, try printing with some other printing layout like X_65_255.
    I hope this will help you.
    Regards,
    Niraj

  • Printing problem for line items in a smartform

    Hi
    I am developing a smartform for inbound delivery, i have to print each line item in each page and each line item should be printed according to count of pallets.
    lets say if my first line item has 5 pallets, it should print 5 time on smartform. and second line item should print on second page , and this logic should continue for all line items.
    can some one help me out ?

    item No    Material No   Descripition  Putaway Bin   SUT  Vendor Batch  LE QTY  COA   Base UOM
    this how my line item should like, i am able to print only single line item for each item no.
    if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

  • Want to print a dark line as seperator in table row  for each loop

    Hi,
    I have a collection of data
    I have to print it in a table but condition is it should print a dark line as separator in table for each loop & also have to print a dark line in the end of table.
    means Some thing like below
    Table Headings
    Data1
    Data1.1
    Data1.2
    Data2
    Data2.1
    Data2.2
    Please help ..
    Bunty
    Message was edited by:
    bunty_india

    Well what does your looping code look like?
    Are you using scriptlets? or JSTL forEach?
    Do you have nested loops?
    What is your data structure?
    Your question about knowing which is the last line in the table requires knowing all of these things. Help us to help you.

  • Customer Invoicing Printing First page line items blank

    Hi Everybody,
    Customer Invoicing Printing First page line items blank and it is printing it from the second page.  Please help me on this.
    Regards,
    Md Ziauddin.

    item No    Material No   Descripition  Putaway Bin   SUT  Vendor Batch  LE QTY  COA   Base UOM
    this how my line item should like, i am able to print only single line item for each item no.
    if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

  • Full-scale Men's, waist 34, pants pattern prints to miniature scale.

    My HP430 DesignJet plotter was plotting online patterns--www.patternsbycomputer.com-- at full scale up to early May. Now the patterns print out in miniature. Ive not changed plotting procedure: Step 1: File-->Print Preview-->Page Setup: select 100% (unclick Shrink to Fit). Close print preview--Step 2: Browser Print-->Select 430 plotter-->more size: custom: 24"wide x 55" long. Select 24"roll media. OK. Print. I get a tiny version of the pants--about 1/2 inch x 1-inch size--instead of a 100% scale.

    Maybe the problem is unique to your PC / plotter. Have you tested it from a different PC? Like maybe at a FedEx Office (used to named Kinkos) store? The main thing is, will it work for your customers.
    In the Chicago area all but the smallest FedEx Office stores have HP plotters, which customers can print to from the rental computers terminals. Back in 2008 and 2009 - during the time they switched from being FedEx Kinkos to FedEx Office, the rental terminals in the FedEx stores had Firefox installed, but I don't know if they currently do. I haven't been in any of their stores since late 2009. Prior to that I spent 6 to 8 hours a week in 3 or 4 different stores as a vendor, before FedEx changed to in store
    If you have a lot of FedEx stores nearby, the larger the store, the more helpful and knowledgeable the associates may be. The larger store managers oversee a cluster of smaller stores and those managers tend to transfer the better associates to the "hub" to handle the more complicated and larger jobs they get.
    Make sure your pages validate to W3C specs. I realize the "square" page was thrown together as an example, but Firefox has gotten pickier with invalid code. But that shouldn't impact this type of problem with printing and the size of an svc image.<br />
    http://validator.w3.org/check?uri=http://www.patternsbycomputer.com/image/square.html

  • Photosmart C6180 - printing incomplete characters, lines, colors

    The printer doesn't print all of the letter (like the tail of the y), doesn't print the first line and doesn't print the right colors.   What it does print is very light and difficult or impossible to read.  Tried cleaning the printhead (through the settings menu on the printer itself) and it seemed to fix the problem but only for a few days and then started again.  Operating system is Windows 8.

    Hello AuntM, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing issues with your print output.  I would like to help.
    I would recommend removing the ink cartridges from the printer, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest following the steps in this document on Quality Issues.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Pages --- picture prints with a line through it

    I copied pictures into a Pages document and everything looks good on the screen. When I print it, a line shows up where an "alignment guide" would be showing guides at object center.
    It is very light but also very noticeable on the paper. When on the screen it only show up when I move the picture around. When moving on the screen it was blue and I changed the alignment guide color to red to confirm that it is the alignment guide.
    I've checked the show guides at center, guides at edges, and had neither guides checked. When moving pictures on the screen these have the expected impact. BUT the light line shows up on the printed page at the center location for all three options.

    A bit more information:
    - The line is sort of colorless. Only on screen when moving about was it blue or red after I changed it.
    - The doc has 3 pictures. The one with the line through it (under my wife's nose) doesn't seem to go on to the picture next to it. Almost as though a power greater than I was tweaking my wife.
    - My last attempt is to have alignment turned off and the third picture is the last to moved. It includes some buildings and signs with horizontal lines. When printed no lines are visible on this third picture. Unfortunately, I now get a couple vague lines, lighter than prints that go this thing going, still in the first picture with the wife and grand kid. Seems like this also takes the printer out of the equation because the lines move.
    This is to be copied as a Christmas letter which will probably make the lines even harder to see, so I'm hoping that it will pass the wife's muster. I'm going to give up for now though will check back to see if any other ideas show up.
    Thanks much for your attention and help!

  • Accessing printer port control lines

    Is it there a way to set and read the printer port control lines with Labview?
    The oparating system will be Windows2000 or XP.
    I would like to select the channel and readout an ADC with MUX (LTC2408).
    Peter Nyffeler mailto:[email protected]
    Tel P 01 363 62 42, Tel G 01 632 43 60, Fax G 01 632 10 21

    Hello Werner,
    Thank you for your answer in the newsgroup.
    Do you know, does accesshw work with XP and all Labview versions?
    Would you mind to send me your DAC's and AD's vi's? That would be great.
    regards
    Peter
    In article <[email protected]>,
    "wha@atmel" wrote:
    >Hello Peter,
    >
    >there is no need for separate Control of ADC + MUX;
    >they might be tight together - shown in Datasheet.
    >
    >But of course you can use the Control-lines of paraport. For W2k you
    >will need accesshw on you machine:
    >http://zone.ni.com/devzone/explprog.nsf/webmain/49664743ded6f1da862564bc004e3a7
    >f?OpenDocument
    >
    >I have made some vi's for DAC's and ADC's @ paraport - e.g. MAX168 or
    >DAC714.
    >If you need some inspiration - let
    me know..........
    >
    >Regards & gruezi
    >Werner
    Peter Nyffeler mailto:[email protected]
    Tel P 01 363 62 42, Tel G 01 632 43 60, Fax G 01 632 10 21

  • Printing OAException message line by line in OAF

    Hi Experts,
    Can any body help in printing OAException Messages Line by Line in OAF.
    Example :
    I am writing code like below :
    throw new OAException(" Please enter Depreciation rate as Straight Line Method : Example \r\n1st Year Premium – 0% Depreciation \n 2nd Year Premium – 20 % Depreciation \n 3rd Year Premium – 20% Depreciation ",OAException.CONFIRMATION);
    I want output like below:
    Please enter Depreciation rate as Straight Line Method : Example
    1st Year Premium – 0% Depreciation
    2nd Year Premium – 20 % Depreciation
    3rd Year Premium – 20% Depreciation
    Thanks in advance.
    Basha

    Hi,
    Refer below link:
    Re: Logging Exceptions in OA Framework
    --Sushant                                                                                                                                                                                                           

  • 2540 printing problem, missing lines when printing from iPad

    Bought a new 2540 to use with iPad, printing direct from wireless direct to printer and missing lines, tried copying and everything is working/printing ok. It just appears to be when printing from iPad. I have tried powering down printer and rebooting but still the same.
    Any help appreciated.

    Hey ,  Welcome to the HP Support Forum.  I see that you're having what sounds like AirPrint quality issues with your HP Deskjet 2540 All-in-One Printer. I would like to assist.  Your 2540 is AirPrint compatible, but not all app content and file formats are AirPrint friendly. I recommend installing the HP ePrint app. (I'm assuming you don't have WiFi if you're a wireless direct user. If that's the case try and visit a public space with WiFi and install the app there. Once installed you can use it within a wireless direct setup).  Let me know if this helps. Thanks for reaching out and have a great day!  

  • Installed a new printer and one line on the top is skipped

    Appreciate your inputs.
    We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
    The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
    Thanks in advance

    Hi
    Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
    Regards
    Tim

  • Printing of changed line item in scheduling agreement  smart form.

    Hi experts,
    I am facing problem in printing of changed line item in schedule agreement.
    can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
    very urgent for me.
    Please help me in this regard.
    Priti Shrivastava

    Hi
    with the help of  T180-TRTYP field you know if that doc has been changed or created.
    If it is not equal to H it is changed. H means created.
    pass the TCODE of Sched Agreement and check this field.
    You can use the CDHDR and CDPOS table s to get the changed values of new item.
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

Maybe you are looking for