Fabric with two Nexus-5548 and a brocade switch does not get fabric updates
We have a fabric containing two Nexus 5548 and a Brocade 5000 switch in interop mode 2. When i make changes to the zoning, the first nexus (the fabric principal) and the brocade switch see the zone changes. The second Nexus switch does not see it. There are no error messages but the change just can't be seen. What can i do to find out, what goes wrong ?
Ouch, deprecated is not the word i wanted to read
We are using 5.1(3)N1(1a) on nexus-rz1-a
and 6.0(2)N1(2) on nexus-rz2-a.
The fabric can be seen :
nexus-rz2-a# show fcs ie vsan 10
IE List for VSAN: 10
IE-WWN IE Mgmt-Id Mgmt-Addr (Switch-name)
10:00:00:05:1e:90:57:27 S(Rem) 0xfffc01 10.88.133.110 (bc-san1)
20:0a:00:2a:6a:72:ba:01 S(Loc) 0xfffc1c 10.88.133.105 (nexus-rz2-a)
20:0a:54:7f:ee:7f:dc:01 S(Adj) 0xfffc0b 10.88.133.100 (nexus-rz1-a)
[Total 3 IEs in Fabric]
nexus-rz1-a# show fcs ie vsan 10
IE List for VSAN: 10
IE-WWN IE Mgmt-Id Mgmt-Addr (Switch-name)
10:00:00:05:1e:90:57:27 S(Adj) 0xfffc01 10.88.133.110 (bc-san1)
20:0a:00:2a:6a:72:ba:01 S(Adj) 0xfffc1c 10.88.133.105 (nexus-rz2-a)
20:0a:54:7f:ee:7f:dc:01 S(Loc) 0xfffc0b 10.88.133.100 (nexus-rz1-a)
[Total 3 IEs in Fabric]
I try to distribute the zoneset this way:
zoneset distribute vsan 10
Zoneset distribution initiated. check zone status
nexus-rz1-a# show zone status
VSAN: 10 default-zone: deny distribute: full Interop: 2
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
Default zone:
qos: none broadcast: disabled ronly: unsupported
Full Zoning Database :
DB size: 6291 bytes
Zonesets:1 Zones:62 Aliases: 44
Active Zoning Database :
DB size: 10243 bytes
Name: FABRIC1 Zonesets:1 Zones:60
Status: Zoneset distribution completed at 08:06:00 UTC Dec 3 2013
nexus-rz2-a# show zone status
VSAN: 1 default-zone: deny distribute: active only Interop: default
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
Default zone:
qos: none broadcast: disabled ronly: unsupported
Full Zoning Database :
DB size: 4 bytes
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Database Not Available
Status:
VSAN: 10 default-zone: deny distribute: full Interop: 2
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
Default zone:
qos: none broadcast: disabled ronly: unsupported
Full Zoning Database :
DB size: 6291 bytes
Zonesets:1 Zones:62 Aliases: 44
Active Zoning Database :
DB size: 10243 bytes
Name: FABRIC1 Zonesets:1 Zones:60
Status: Activation completed at 13:03:42 UTC Dec 2 2013
Similar Messages
-
I keep getting this message: "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums. -
Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum. -
I began to follow the steps after the "restore" and when I got to the point where I add my email address, this is the message I recieved. I cannot use my iPod now because of this update! help!
Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums. -
Clicks and Pops Soundtrack Pro does not get rid of?
How do I edit out (reduce) clicks, pops? (Soundtrack Pro's fix all does not take care of that!)
What I call clicks (noise) show up in the sample editor as a straight line. I have seen videos of somone erase, shorten these noise-spikes in other applications so one can not hear them.
Is there a tool that I can use to do this in Soundtrack Pro, (Logic Pro)? I am working on audio recordings that were recorded with reel to reels then transfered to a computer with that noise. Please help.
W.W.
Logic Studio, OS X Mavericks (10.9)Thank you for your time and patience Studio X. I am new at this, the Soundtrack Pro manual gives me a blank page when I seach for waveform editing. Can you please post step by step? (Where and how to do)
W.W. -
The down load problem with Itune 7.5 and buy a game does not compatible
Q1:
I have a Ipod classic 80GB.
Recently i buy two games( Zuma & Phase) from itune store, i have already finished downloading the Zuma but found it can only compatible with the Ipod 5th generation.
My question is How can i play it on my Ipod classic? Or there is any alternative way?
Q2:
When i use the itune to download the Phase game, as the game is a little big,so i will cost me a long time to download it. But every time my network has a short break,the download will
restore the download again with 0%. I have spend about 3 days withing this damnable download!
How can i do ?If you have an Internet connection that keeps failing before the download completes, there's little that anyone here can do to help you. I'd suggest you find a friend with a more reliable Internet connection, download the game in his/her system, then transfer the game (via USB flash drive, CD, etc.) to your computer. For help getting the game working on your iPod (if it's possible), I'd suggest that you try asking in the iPod Classic forum.
BTW, we're all just your fellow users here, helping out as we have time, knowledge and inclination. So have a bit of patience after you post, particularly when you post late at night. Posting over and over demanding help will just irritate people and make it less likely that someone will be interested in helping you. -
Not impacting Gmail but has rendered search unusable. I have been searching for a way to fix and can't seem to find anything specific to this problem. If I open safari and go to google - it is absolutely fine so don't think this is a google preference. Seems to be specific to Firefox. Tried reloading firefox...didn't fix the issue.
Firefox remembers zoom settings for each page, try resetting the zoom settings on Google. For details of how to do that see the [[page zoom]] article.
-
Just bought a new HP Lap Top with simple pass 2011 and the scan bar does not seem to be working
For some reason the scan for the SimplePass 2011 already seems not to be working JUST bought it today??
if you want my honest opinion send it back to where you got it and get it replaced.
Try this hard reset
pressing volume down + camera key + menu key and pressing power button)
After that return it if no joy
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
HT201263 I have tried all the steps and my iphone still does not get recognized by itunes. now what?
I have stopped and restarted the Apple Mobile Device Manager
I have confirmed USB device is recognizedThis Apple article might help you out -> iOS: Device not recognized in iTunes for Windows
You say you installed the Apple Mobile Device Service, is it running though? The Apple article will help you check.
Also, use the article to try and remove the security software from the equation. -
I tried syncing entire music library to ipod. some albums were skipped. tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod? the album is imported and not purchased thru itunes store.
Does it play in iTunes on the computer? What is the format of the album?
Right click and select Get Info. Look under File in iTunes 12 -
FCoE with Cisco Nexus 5548 switches and VMware ESXi 4.1
Can someone share with me what needs to be setup on the Cisco Nexus side to work with VMware in the following scenario?
Two servers with two cards dual port FCoE cards with two ports connected to two Nexus 5548 switches that are clusterd together. We want to team the ports together on the VMware side using IP Hash so what should be done on the cisco side for this to work?
Thanks...Andres,
The Cisco Road Map for the 5010 and 5020 doesn't include extending the current total (12) FEX capabities. The 5548 and 5596 will support more (16) per 55xxk, and with the 7K will support upto 32 FEX's.
Documentation has been spotty on this subject, because the term 5k indicates that all 5000 series switches will support extended FEX's which is not the case only the 55xx will support more than 12 FEX. Maybe in the future the terminology for the 5k series should be term 5000 series and 5500 series Nexus, there are several differences and advancements between the two series. -
Nexus 5548 and Define static route to forward traffic to Catalyst 4500
Dear Experts,
Need your technical assistance for the Static routing in between Nexus 5548 and Catalyst 4500.
Further I connected both Nexus 5548 with Catalyst 4500 as individual trunk ports because there is HSRP on Catalyst 4500. So I just took 1 port from each nexus 5548, make it trunk with the Core Switch (Also make trunk from each Switch each port). Change the speed on Nexus to 1000 because other side on Catalyst 4500 line card is 1G RJ45.
*Here is the Config on Nexus 5548 to make port a Trunk:*
N5548-A/ N5548-B
Interface Ethernet1/3
Switchport mode trunk
Speed 1000
Added the static route on both nexus for Core HSRP IP: *ip route 0.0.0.0/0 10.10.150.39 (Virtual HSRP IP )*
But I could not able to ping from N5548 Console to core Switch IP of HSRP? Is there any further configuration to enable routing or ping?
Pleas suggestHello,
Please see attached config for both Nexus 5548. I dont have Catalyst 4500 but below is simple config what I applied:
Both Catalyst 4500
interface gig 3/48
switchport mode trunk
switchport trunk encap dot1q
On Nexus 5548 Port 1/3 is trunk
Thanks,
Jehan -
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff
It is not possible to do that.
Allan -
i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?
The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
PC Connection Issues...please advise!
Hello all, I am having a MAJOR difficulty trying to connect the HTC Droid Incredible to my computer in order to transfer files back and forth. Whenever I plugged the device (which, I think it is important to state, was a "certified like-new replaceme
-
How to read chinese and keep azerty keyboard (for ...
I m bored to be not abble to read all the messages that i received in chinese. I canot change for the chinese soft coz i won t have azerty keyboard (i need it) How to be CONNECTED with others PEOPLE ???????
-
Displaying mutiple pictures onto a front panel
Hi , Basically what iam trying to do is have mutiple images on the front panel. The problem that iam having is that when i load an image onto the front panel it overwrites the other image. What i mean by that is , that instead of having two images o
-
Question about encrypt/decrypt
Hello! I want to transform my inputdata to my databas so no one can read it in clear text. I also have to be able to decrypt the text for process information when I want to. I have tried to use DES but that algorithm seems to use different keys every
-
Keynote Streaming problems - skips bad
Hi, I want to watch the Expo Keynote streaming, but it is not working well. When I play the video in QT it skips and pauses all the time. really bad. Are there special preferences(enabling on?) that will help this problem? Have QT 7.04. I can stream