Fabricated ID numbers keep showing up

OK, in my long, very long quest to understand networking and it's quirks, I am again asking what do these entries mean. Below are outputs of a Terminal request to list all network activity. The only machine code identy that's mine is"00:14:51:ec:e9:04". The rest aren't mine, for that matter are they even real ID's?
arp who-has 10.0.1.3 (70:6c:65:2e:63:6f (oui Unknown)) tell 10.0.1.1
21:28:49.172687 IP 10.0.1.2.52894 > 10.0.1.1.domain: UDP, length 39
21:28:49.215986 arp who-has 10.0.1.2 (b8:f5:97:e9:fc:fe (oui Unknown)) tell 10.0.1.1
21:28:49.216022 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
21:28:49.216606 IP 10.0.1.1.domain > 10.0.1.2.52894: UDP, length 39
21:37:08.865635 IP 10.0.1.2.52895 > 10.0.1.1.domain: UDP, length 35
21:37:09.031024 arp who-has 10.0.1.2 (65:03:63:6f:6d:00 (oui Unknown)) tell 10.0.1.1
21:37:09.031061 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
65:63:3a:65:39:3a (oui Unknown)) tell 10.0.1.1
08:40:29.050359 arp who-has 10.0.1.2 (61:72:70:61:00:00 (oui Unknown)) tell 10.0.1.1
08:40:29.050390 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
13:55:06.044670 arp who-has 10.0.1.2 (06:03:26:00:00:00 (oui Unknown)) tell 10.0.1.1
13:55:06.044741 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
13:56:06.645736 IP 10.0.1.2.53134 > 10.0.1.1.domain: UDP, length 39
13:56:06.890840 IP 10.0.1.1.domain > 10.0.1.2.53134: UDP, length 39
13:56:57.484798 IP 10.0.1.2.53135 > 10.0.1.1.domain: UDP, length 39
13:56:58.093353 IP 10.0.1.1.domain > 10.0.1.2.53135: UDP, length 39
13:59:06.298992 IP 10.0.1.2.53136 > 10.0.1.1.domain: UDP, length 39
13:59:06.775034 IP 10.0.1.1.domain > 10.0.1.2.53136: UDP, length 39
15:11:24.513026 EAP code=1 id=3 length=117
15:11:24.513046 EAP code=2 id=3 length=117
15:11:24.514809 EAP code=1 id=3 length=95
15:11:24.519969 EAP code=2 id=3 length=175
15:11:24.749862 EAP code=1 id=3 length=95
15:11:24.749883 EAP code=2 id=3 length=143
16:00:37.667214 IP 10.0.1.2.53167 > 10.0.1.1.domain: UDP, length 39
16:00:37.751617 arp who-has 10.0.1.2 (65:03:63:6f:6d:00 (oui Unknown)) tell 10.0.1.1
16:00:37.751677 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
16:00:38.283789 IP 10.0.1.1.domain > 10.0.1.2.53167: UDP, length 39
18:52:46.610822 arp who-has 10.0.1.2 (bd:2c:11:3a:f1:59 (oui Unknown)) tell 10.0.1.1
18:52:46.610894 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
18:52:47.217073 IP 10.0.1.1.domain > 10.0.1.2.53202: UDP, length 130
16:50:21.271165 arp who-has 10.0.1.3 (96:6b:57:6e:ed:c8 (oui Unknown)) tell 10.0.1.1
16:50:24.843073 IP 10.0.1.2.mdns > 10.0.1.1.domain: UDP, length 39
16:54:31.332264 arp who-has 10.0.1.3 (35:8b:39:b5:97:d5 (oui Unknown)) tell 10.0.1.1
16:54:31.332883 arp who-has 10.0.1.3 (03:6f:72:67:00:00 (oui Unknown)) tell 10.0.1.1
16:57:43.038086 IP 10.0.1.3.49324 > 10.0.1.255.netbios-ns: UDP, length 50
19:21:31.021956 arp who-has 10.0.1.2 (17:52:fe:2b:a5:19 (oui Unknown)) tell 10.0.1.1
19:21:31.021959 arp who-has 10.0.1.2 (70:61:00:00:0c:00 (oui Unknown)) tell 10.0.1.1
19:21:31.021963 arp who-has 10.0.1.2 (63:6f:6d:00:00:01 (oui Unknown)) tell 10.0.1.1
19:21:31.021966 arp who-has 10.0.1.2 (03:63:6f:6d:00:00 (oui Unknown)) tell 10.0.1.1
19:21:31.022028 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:21:31.022050 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:21:31.022057 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:21:31.022065 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:22:22.365360 IP 10.0.1.2.65532 > 72.5.123.6.http: tcp 0
19:36:03.580054 IP 10.0.1.2.49160 > 67.43.162.250.http: tcp 499
19:36:04.121064 arp who-has 10.0.1.2 (69:03:6e:65:74:00 (oui Unknown)) tell 10.0.1.1
19:36:04.121098 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:36:04.762741 IP 67.43.162.250.http > 10.0.1.2.49160: tcp 50
19:36:04.762816 IP 10.0.1.2.49160 > 67.43.162.250.http: tcp 0
19:43:37.344098 arp who-has 10.0.1.3 (65:63:3a:65:39:3a (oui Unknown)) tell 10.0.1.1
19:44:15.482776 IP 10.0.1.2.49161 > 67.43.162.250.http: tcp 0
19:44:30.984298 IP 10.0.1.2.49159 > 67.43.162.250.http: tcp 0
19:45:19.488497 IP 10.0.1.2.49161 > 67.43.162.250.http: tcp 0
19:45:34.989926 IP 10.0.1.2.49159 > 67.43.162.250.http: tcp 0
19:46:23.494759 IP 10.0.1.2.49161 > 67.43.162.250.http: tcp 0
19:46:38.996194 IP 10.0.1.2.49159 > 67.43.162.250.http: tcp 0
19:50:24.886405 IP 10.0.1.2.mdns > 10.0.1.1.domain: UDP, length 39
19:50:25.307466 arp who-has 10.0.1.2 (00:00:01:c6:00:04 (oui Unknown)) tell 10.0.1.1
19:50:25.307526 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
19:50:25.817530 IP 10.0.1.1.domain > 10.0.1.2.mdns: UDP, length 39
20:30:21.609178 EAP code=1 id=3 length=95
20:30:21.609196 EAP code=2 id=3 length=143
20:30:22.135138 EAP code=1 id=3 length=95
20:30:22.135147 EAP code=2 id=3 length=143
20:30:22.659971 EAP code=1 id=3 length=95
20:30:22.659983 EAP code=2 id=3 length=143
22:21:46.049685 arp who-has 10.0.1.2 (20:53:75:6e:2c:20 (oui Unknown)) tell 10.0.1.1
22:21:46.049725 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
08:20:13.174819 arp who-has 10.0.1.2 (71:03:e3:0f:0f:a3 (oui Unknown)) tell 10.0.1.1
08:20:13.174855 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
11:04:54.833453 arp who-has 10.0.1.2 (6e:65:74:00:00:01 (oui Unknown)) tell 10.0.1.1
11:04:54.833561 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
11:10:27.502447 IP mail.comcast.net.pop3s > 10.0.1.2.49813: tcp 0
11:10:27.502552 IP 10.0.1.2.49813 > mail.comcast.net.pop3s: tcp 0
11:13:39.384399 arp who-has 10.0.1.3 (6f:75:70:20:6b:65 (oui Unknown)) tell 10.0.1.1
11:14:54.511450 IP 10.0.1.2.49770 > mail.mac.com.imap: tcp 18
11:14:54.511823 IP 10.0.1.2.53806 > 10.0.1.1.domain: UDP, length 34
11:14:55.103403 IP mail.mac.com.imap > 10.0.1.2.49770: tcp 290
11:14:55.103425 arp who-has 10.0.1.2 (6e:65:74:00:00:01 (oui Unknown)) tell 10.0.1.1
11:14:55.103493 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
11:14:55.103547 IP 10.0.1.2.49770 > mail.mac.com.imap: tcp 0
12:39:57.929865 arp who-has 10.0.1.2 (e8:4d:d0:87:73:7f (oui Unknown)) tell 10.0.1.1
12:39:57.929935 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
12:39:58.686858 IP mail.comcast.net.pop3s > 10.0.1.2.49851: tcp 0
12:50:25.013167 IP 10.0.1.2.mdns > 10.0.1.1.domain: UDP, length 39
12:50:25.165193 arp who-has 10.0.1.2 (70:61:00:00:0c:00 (oui Unknown)) tell 10.0.1.1
12:50:25.165225 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
12:50:25.165807 IP 10.0.1.1.domain > 10.0.1.2.mdns: UDP, length 39
21:58:28.806511 arp who-has 10.0.1.3 (b1:b3:cd:a4:b5:1a (oui Unknown)) tell 10.0.1.1
21:58:48.467265 arp who-has 10.0.1.3 (b1:b3:cd:a4:b5:1a (oui Unknown)) tell 10.0.1.1
21:58:58.604902 arp who-has 10.0.1.3 (b1:b3:cd:a4:b5:1a (oui Unknown)) tell 10.0.1.1
21:59:18.572947 arp who-has 10.0.1.3 (b1:b3:cd:a4:b5:1a (oui Unknown)) tell 10.0.1.1
21:59:28.403402 arp who-has 10.0.1.3 (b1:b3:cd:a4:b5:1a (oui Unknown)) tell 10.0.1.1
22:07:27.021644 arp who-has 10.0.1.2 (63:6f:6d:00:00:01 (oui Unknown)) tell 10.0.1.1
22:07:27.021680 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
06:48:02.482589 IP 10.0.1.2.49197 > 10.0.1.1.domain: UDP, length 32
06:48:06.481408 IP 10.0.1.1.domain > 10.0.1.2.49192: UDP, length 32
06:48:06.502630 arp who-has 10.0.1.2 (63:6f:6d:00:00:21 (oui Unknown)) tell 10.0.1.1
06:48:06.502660 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
07:49:28.715035 arp who-has 10.0.1.2 (03:01:01:01:04:02 (oui Unknown)) tell 10.0.1.1
07:49:28.715077 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
09:01:43.620801 arp who-has 10.0.1.2 (72:df:c1:88:3b:26 (oui Unknown)) tell 10.0.1.1
09:01:43.620837 arp reply 10.0.1.2 is-at 00:14:51:ec:e9:04 (oui Unknown)
Airport Extreme Mac OS X (10.4.9)

Similar Messages

Numbers cell keeps showing the date

I find that Column A in Numbers (List style) keeps showing the date. I don't want to show the date. I want this column to show just a number. How do I prevent this column from turning numbers I type in there as a date?

select the column and set the format to "Automatic":

HT1414 my i phone stuck in recover mode how can i fix it it keep showing up 1015 an different numbers

my i phone stuck in recover mode how can i fix it it keep showing up 1015 an different numbers

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
-Griff W.

In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, France

Ian
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes.

Unknown iPhone keeps showing up on Find My iPhone

An unknown iPhone keeps showing up on Find My iPhone on my iphone 5. I removed it, but it came back in a few days. I then erased it and then removed it and it came back again. I then erased it, removed it and changed my Apple password, A week later it showed up again.
I did sell an iPhone 2 years ago but i erased it and removed the SIM card before shipping. I dont know if the one that is showing up is my old phone or some other iphone.
Can someone please provide some information as to what is going on?

If it comes back, then go to iCloud.com, log in with your Apple ID & password, and place the offending iPhone in Lost Mode and set a passcode up for it.
Then, change your Apple ID password to something very complex (using a mixture of capital letters, lowercase letters, numbers and maybe even some special characters), making it at least 12 characters long.

Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!

installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

How do i change my telephone numbers keeps asking for a valid one??

how do i change my telephone numbers keeps asking for a valid one??

If you simply chose the wrong phone number setting Messages up on the iMac you just go back into it's settings and choose the right number.
If your iPhone number is not showing up under the preferences for Messages and FaceTime on your iMac you are logged into the wrong Apple ID on the iMac or your iPhone is not registered to that ID. With the info you give it sounds like you have multiple users using the same Apple ID in which you would have multiple phone numbers listed under the preferences on the iMac and iPhone.
I have found iCloud, Messages and Factime are easiest setup as each user having their own Apple ID. That's not to say it is impossible for multiple users to use one Apple ID. First you have to sign into the Apple ID on your iPhone which will register the number to that account. Set your iPhone's Messages and Facetime Settings to use it's phone number for send and receive. Then it should appear when you are trying to setup Messages on the iMac. Each user using the same Apple ID will have to be using their own numbers or email address so you may have to have other users uncheck your number. The problem with this setup is it is easy for others to start receiving your messages.

HT1414 it keeps showing a error occurs but no number

hello, I am trying to sync my iphone with my laptop, it keep showing that an error occured but no number

I'm sorry to here that. Try reseting the password and then download the app.

My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 5 won't turn on but when plugged into power source it keeps showing apple logo?

My iPhone 5 won't turn on at all and then when I plug it into a power source either into a plug socket or into my laptop with the USB cable it keeps showing start up screen with apple logo over and over again on a loop.
I have tried holding the top and front button together, this didn't work. I have also tried connecting to my laptop and following the reboot steps that I found on another discussion forum. Neither worked for me. The phone just won't reboot and it keeps continuing to loop the apple logo screen over and over without me touching anything.
The iPhone won't even connect to itunes and so itunes seems to not recognise my phone because its not even turning on (just continually apple logo screen appears for 5 seconds, goes to black screen and then repeats).
I don't know what is happening to it! Can anyone help? Is it a fault with the hardware or have I dont something to it? The next appointment at the genius bar for me is monday so I'm going to keep looking for any more recent ones until then but I really need to get it sorted before then so if anyone can help that would be great!
Thanks

Try a reset when your iPhone is plugged into the charger as you say it does not respond when not plugged in...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
See if it will charge after this.

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

My iPhone 3s keeps showing that there are updates from the ap store but when I try to update it says all apps are up to date. Also when I select purchased apps it just gives me a blank page and not a list as expected

My iPhone 3GS keeps showing I have app updates but when I go to
App Store It tells me all apps are up to date. Also when I select
purchased apps It just gives me a blank page.

Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

Problem with setting up new Ipad Air2:I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with thesame

I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with the same ID. Please help me if you have come across the same issue. Thank you!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

How can i remove items from list that have been deleted when i click on them it keeps showing empty

how can i remove items from the list that have been deleted when i click on them it keeps showing folder empty

Actually, Reader SHOULD keep showing documents that no longer exist, I disagree. It's no big deal, and people will quickly realise why they can't open the file. They open more files, the old ones move off.
The REASON why it should not check is that checking whether a file exists can take a long time when things aren't good. For instance if a file server goes down, or a memory card is unplugged. That in turn would mean delays opening the File menu, and I've seen some software that can sit there for several minutes. That would really give people something of which to complain...

I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

Did you remove your account information from the other person's iPhone?

Fabricated ID numbers keep showing up

Similar Messages

Maybe you are looking for