FAC support for Linksys SPA962 phones.

Hi
We are running CUCM version 9.1 and few linksys phones are registered to this CUCM
Is it possible to configure FAC code for these linksys phones.
So that before dialing international call, FAC code is required.
Is these phones are supported cisco CUCM FAC features ? Is it configurable ?
Rgds
Rajesh Kumar

Rajesh,
Early media just means it can support a 180 Ringing or 183 Session Progress with SDP in order to establish a media connection prior to the call connect for things such as ringback and playing tones for FAC and such.  What did you see in the CallManager traces for the call?  Can you pull out all the SIP messaging for a test FAC call or just attach a packet capture from the phone?
Thanks,
Brian

Similar Messages

  • Why is Adobe dropping support for pre 3GS phones?!

    I think it's a bad decision to drop support for pre 3GS devices. There are still many out there and if support is dropped we're forced to still use the old PFI to reach the complete audience.
    It's clear that OpenGL ES 2 offers a lot more fancy stuff than OpenGL ES 1.5 does, but still, things like GPU_VECTOR or sophisticated blending are perfectly doable with OpenGL ES 1.5.
    And if a clean implementation is really not possible, Adobe should at least allow to publish for old devices even if this means that not all optimization techniques can be used.
    I develop iPhone apps using different technologies and AIR is attractive for me because I can target with one project a big range of different plattforms. If Adobe drops support for old phones, this advantage is heavily shortened!
    What is your opinion on the this development?

    Apple have dropped support for pre-3GS because to pull of the features and performance in iOS 4.3 they had to develop just for the ARM7 chip, and not for the ARM6. They probably have a good sense of the number of people that have the older devices, and think it's ok to not update the software on those devices.
    The same may be true for Adobe.
    I am trying to find out how to make AIR 2.6 and AIR 2.0 live together in Flash CS5. If I work it out I'll let you know.

  • What to support for Cisco IP Phone 7912?

    dear all.  please help me!!!
    I have a 7912 ip phone, and using Cisco CME in 1760, but I do not see this type 7912 ip phone telephony service there. whether it was true ip 7912 phone is not support for the Cisco 1760 CME. and whether support for the cisco 7912 ip phone?  whether the telephony-service configuration is equal to the telephony-service configuration for the ip phone 7940?
    please help me  !!!

    Hi to all
    Please I ned some advice , I was try to reset to factory defaults a Cisco IP Phone 7912 and I was failed .
    Please can you help me ?
    Thanks a lot !
    Hugo Baez

  • Replacement for Linksys CIT200 phone

    I have been using Linksys CIT200 cordless phone for years - until today when it died. In case you haven't had the pleasure to use it, it did require to have Skype installed on a computer and it connected via USB (and not directly to a router). I would like to replace it but I don't know with what. All phones that I see on Amazon do not require PC. I don't see how that can work for me for these reasons:
    1) I use add-on software that allows me to record skype calls for business purposes. I assume there is no way to install add-on directly to Skype phone that do not require PC or is it?
    2) How would I do video-calls? With CIT200, I had a choice to initiate a video call from my computer or just a Skype-out call from the cordless phone; all that with one Skype identity.
    Thanks for any advice you can give me.

    There are a few devices that you can find that work with Skype via USB.  I would just do a search for" Skype USB adapter".  I've personally used the Yealink B2K RJ11 and I was satisfied with the device and the price.  If you are comfortable with your Linksys device you can find it online used/new at an auction site for a decent price.  I just checked and you can pick one up  for between 12 to 40 bucks after shipping.
    In response to your questions:
    1.  You would have to have software specifically designed for your phone and its implementation of Skype to do this.  It is highly unlikely you will find something and if it exists with the same feature you are used to.
    2.  With most Skype USB adapters I believe it would very similar if not the same.

  • Cisco UC5xx 8.6 Support for 99xx SIP phones using CCA 3.2.1

    Hi Friends,
    I was looking through posts here in the SMB commuity, the SWP 8.6 for UC5xx, the RN for CCA 3.2.1, and the OLH for CCA 3.2.1, and found a nice thread that will help anyone wanting to get a 9951 or 9971 SIP phone to operate on the UC5xx after upgrade to the Cisco IOS {15.1(4)M4} bringing CME 8.6 to Telephony Services and selection of the SIP 9-2-2 phone loads (included in the SWP) for 99xx.
    My only inquiry for Cisco to check, would be why isnt this documented in the release notes,
    https://supportforums.cisco.com/servlet/JiveServlet/previewBody/26979-102-1-67567/cca_3_2_2_relnotes.pdf
    since CCA doesnt seem to add the 'load 99xx sip99xx.9-2-2' statement, the 'tftp-path flash:', followed by the 'create profile' under VOICE REGISTER GLOBAL?
    If it is supposed to work, then I would alert you that it did not.  After Upgrading CCA to 3.2.1 and then upgrading the UC5xx to SWP 8.6, the adminisrtrator manually adds the 99xx phone by entering MAC and Type under Configure> Telephony> Users/Extensions> Users and Phones: ADD button.  Nothing special, just a normal extension on one button, Video Enabled, and a VM box created.  This allows the phone to register just fine, but it doesnt automatically upgrade to 9-2-2 due to the missing bold commands above.
    I think if this were a known defect, it would have been documented in the RNs, so I raise it to your attention.
    Which operation should have added these commands?
    Can you let us know if this is an anomaly or if everyone will encounter this?
    Thanks kindly,
    Steve

    Yeah uh beleive me Steven, I have tried everything and every location to get these phones working and nothing did. Other people have the same issue (thread here somewhere) luckily mine are only out 1 hour others are out many hours.
    Thanks,
    Bob James

  • Is there support for syncing Android phone contact lists, calendar etc with Mac Mail?

    HI, I have a Sony Z2 and I need to sync calendar, activity and contact data with with Mavericks Mail, can you suggest how this could be done?  I have looked and there are a couple of utilities (including SyncMate ?) some of which have mixed reviews. I have seen you can use a gmail account but as I have more than one at the moment I want to avoid adding another one if this if possible.

    I am a very happy T-Mobile subscriber, but T-Mobile offers virtually no handsets compatible with iSync. You would be far better off examining one or more of these handsets or smartphones available from Cingular:
    • Nokia 6682
    • Nokia 9300*
    • SONY Ericsson Z520a
    • SONY Ericsson W600i
    • Palm Treo 650
    *requires an inexpensive plug-in from Nova Media. More information is available at http://www.novamedia.de/sync/index.html
    It seems likely that both Cingular and T-Mobile will offer the next-generation Palm Treo 700p when a GSM version is available. The only such units available now are both CDMA smartphones - one intended for use on the Sprint network, the other on the Verizon network.
    You can also use a Windows Mobile device, though a release version of a third party package required to support it with iSync is not currently available. An early alpha-release version of the Missing Sync for Windows Mobile is available, with a not yet complete feature set. More information about that application is available here:
    http://www.markspace.com/missingsync_windowsmobile.php
    Both Cingular and T-Mobile offer smartphones bases upon Windows Mobile. In addition, T-Mobile offers the danger hiptop OS-based Sidekick II. You can synchronize hiptop devices with the addition of the Missing Sync for hiptop:
    http://www.markspace.com/missingsync_hiptop.php

  • Turkish tts support for s60 v3 &s60 v3.1

    Dears,
    I own one e90 commi and one e61i and using them flawlessly.
    I am living in Turkey.
    I am using text to speech function for emails and sms mesages in English while driving, it is a very useful function.
    Hence I am living in Turkey, most of my messages are obviously in Turkish.Unfortunately messages in Turkish are completely meaningless when they are read in English language and accent.
    When I check Nokia's text to speech support page, I realized that there is Turkish language modules for S60 v3.2 phones like e75, n78, n79, n85, n96, so on, however there is no turkish language support for s60 v3 and s60 v3.1 phones (i.e. e61i and e90).
    Is it possible to implement the language support for v3.2 phones to v3 & v3.1 phones?
    Do you have an idea about it?
    And one question to nokia guys; there are many nokia phones sold in Turkey (you know sales figures better than me), why dont you support Turkish tts for older phones?

    As I know, 2.1 version doesn't work with Tuxedo Corba on RH AS3.0.
    "Rick Robinson" <[email protected]> wrote in message
    news:407d98a4$[email protected]..
    >
    Is there any target for support of RedHat v3 for Tuxedo? Or is it alreadysupported
    (that is, will the 2.1 binary version work on v3)?
    Thanks,
    Rick

  • HT204380 I don't have face time in my i phone 4s what to do for getting face time in i phone

    I don't have face time in my i phone 4s what to do for getting face time in i phone

    Where did you purchase your phone?
    Facetime is banned in some countries in the middle east, UAE...
    Go to settings - facetime -
    using facetime http://support.apple.com/kb/ht4319

  • Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

    Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

    Is this itunes on the iPad or on my computer? Thank you for the reply.

  • HT204053 I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have a Phone support for this area)

    I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have Phone support for this area)
    Please, help me :)

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • Support for SPA932 with SPA525G phone on the UC520

    Will the SPA932 be supported with the SPA525G phone on the UC520 in SCCP mode?
    The command for configuring the SPA525G with a SPA932 would be similar to the following when such feature is supported:
    ephone 1
    device-security-mode none
    video
    mac-address 0021.A000.D001
    username jdoe password "jdoe"
    type 525G addon 1 932
    keep-conference
    button 1:1
    I do know that the following addon module combinations are supported on the UC520:
    796x / 7914
    797x / 7914
    7962 / 7915
    7965 / 7915
    7975 / 7915
    7962 / 7916
    7965 / 7916
    7975 / 7916

    There are no plans to support the SPA932 in SCCP mode. A new sidecar will be offered for the CP-500 series and the SPA525G in SCCP mode.
    Thanks,
    Marcos Hernandez
    Technical Marketing Engineer
    Cisco Systems, Inc.

  • Support for Java Server FAce in Workshop

    Dear All,
    Does anyone have any idea if and when Workshop will include support for the Java
    Server Faces (JSF) framework?
    Thank you
    Abe

    While I cannot share any specific product plans from any vendor, I would like to point out that all of the vendors of IDEs in the Java web application space are members of the JSR-127 expert group that is defining JavaServer Faces. Indeed, one of the primary design goals for the APIs is to ensure that development tools have sufficient information available to create high quality user interfaces at design time, so we're doing all we can to enable this kind of thing.
    As JavaServer Faces matures, I think you will be very pleased with the quality and quantity of tools support for it.
    Craig McClanahan

  • I have never been able to open my itunes store.  I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes.  Can someone please help!

    I have never been able to open my itunes store.  I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes.  Can someone please help!
    I have tried
    -  setting time and date
    -  uninstalling
    -  upgrading itunes
    -  changing credit card
    Any other suggestions?

    Update your safari.  Install this:  http://support.apple.com/kb/dl1569
    The itunes store relies on certain components of safari, regardless of if you use it or not.

  • Linksys support for VoIP adapters

    I would like to know how to get in touch with Linksys tech support, via e-mail for instance.
    I would like to report a bug and ask for help on a new product I just bought. There doesn't seem to be any tech e-mail I can write to, just this community forum which of course isn't endorsed by Linksys. I posted the following topics here:
    http://forums.linksysbycisco.com/linksys/board/message?board.id=VoIP_Adapters&thread.id=5459
    http://forums.linksysbycisco.com/linksys/board/message?board.id=VoIP_Adapters&thread.id=5458
    If anyone can lend a hand I'd greatly appreciate it. I bought an SPA8000 on-line and don't really know where to ask for help or report bugs. I also tried the online chat service but it is unavailable for my product...
    Thanks in advance.

    Hi prashantqta,
    Welcome to the Nokia discussion boards!
    Unfortunately the Nokia 7230 does not have support for VOIP. Do you currently have this device or are you looking for a device with VOIP?
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Support for Java Server Faces

    I hope that in the next future will appear, on the market, IDE (such as JBuilder) or authoring tool (as Deamweaver), that support the creation of jsp pages. A sort of RAD for jsp+tag library.
    We expect such effort from software producer.
    Thanks
    Aldo Funicelli from Milan

    While I cannot share any specific product plans from any vendor, I would like to point out that all of the vendors of IDEs in the Java web application space are members of the JSR-127 expert group that is defining JavaServer Faces. Indeed, one of the primary design goals for the APIs is to ensure that development tools have sufficient information available to create high quality user interfaces at design time, so we're doing all we can to enable this kind of thing.
    As JavaServer Faces matures, I think you will be very pleased with the quality and quantity of tools support for it.
    Craig McClanahan

Maybe you are looking for