Face detection freezes my system
Has any of you experienced hanging/freezing problems while face detection is running? I tagged a couple of faces from my pictures (my library size is about 70gb) and shortly after this my whole system hangs. Mouse still moves, but I cannot click anything and I can't even bring up force quit even using keyboard shortcut!
Yes. Although it doesn't crash iPhoto for me, it brings my system to a crawl while it looks for faces in photographs of trees, buildings, clouds etc. I don't take many pictures of people, and I just don't want it to try to identify anyone. I haven't defined any faces, so why is it looking? So it can identify that complete stranger that accidently walked into my photo of Angkor Wat?
I really really want a way just to switch this off. Please. Howsabout if you haven't defined any faces it doesn't look for any? I mean, if you haven't already defined a face, why is it looking at all?!
Please make it stop.
Similar Messages
-
Face Detection on iPhone4s freezes on faces & won't work! Help!
Hi all. I've been searching all across the Internet in hopes that others are having the same issue as me. I'm hoping that anyone can shed some light on why this keeps happening to me.
I purchased a brand new iPhone4s in December of 2011. My phone was working great till around April 2012, I began having the issue that if I take a picture of people with the apple camera app (both front & back camera), face detection locates the faces but then freezes on me. Many times the camera won't take the picture and then shuts down and restarts itself. Other times, it will take the picture but only after several minutes. The camera app works great on landscape, but not faces. It doesn't matter if I'm opening the camera from the lock screen or in my unlocked phone.
I took my iphone into the apple store numerous times and it was eventually replaced. I started with a clean phone and just in case, I uploaded my apps back on my new iphone from itunes, not icloud. I did this to avoid installing the problem back on my iphone. Sadly, the problem is now arising again on a replaced iphone.
In addition, on my orginal iphone (before replacement) sometimes, if I would want to edit a picture in the camera roll, the picture would freeze and cause my phone to shut down and restart. I haven't encountered this problem yet on the replaced iphone.
Is this problem happening to anyone else? Please help. Thank you!Hello, I would like to add that I recently experienced this problem with iPhone 4S. Multiple face detection defeinitely causes the camera app to lock up, whereas scenery pictures do not. It just happens to be rare for me to take pics with many people in them on my iPhone, so I was suprised to find this happening.
The only advice I could find was a forum post, which suggests the key is to always "unlock" before entering the camera app. Meaning, the quick-slide access to camera from the lock screen may be at the root of the problem.
http://www.iphoneforums.net/forum/iphone-camera-67/iphone-4s-camera-multiple-fac es-detection-prevents-photos-being-taken-no-shutter-41481/ -
Is any software available for face detection to unlock screen?
is any software available for face detection to unlock screen?
No. Third party software annot control the operating system.
-
Mail tool seems to freeze my system at seemingly random times
Mail tool seems to freeze my system at seemingly random times for a couple of minutes once or twice an hour. What's going on?
I've run permissions repair, & the disk repair run showed no problems. The disk is split into Mac & BootCamp partitions and there's about 80GB free on the Mac partition. I'm running 2 x 8GB DIMMs that have been carefully matched and extensively memtested and passed. This is an early 2011, 15 inch MBP with the 1.5 GB ATI GPU option.
The Console displays about 40 lines like this. Notice the 2 minute time delta between the 1st line in this subset from Console / All Messages:
12/19/13 7:23:22.727 AM [0x0-0x78078].org.mozilla.firefox: OpenGL version detected: 210
12/19/13 7:25:51.092 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.092 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.093 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.094 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.095 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.096 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.097 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.097 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.098 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.099 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.100 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.100 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.101 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.102 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.102 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.103 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.104 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.104 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.105 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.106 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.128 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.129 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.130 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.131 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.131 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.132 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.133 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.134 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.134 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.135 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.136 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.137 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.138 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.139 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.140 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.141 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.143 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.144 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.145 AM Mail: CFTimeZoneCreateWithName failed for -0500
12/19/13 7:25:52.146 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.147 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.148 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.148 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.149 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.150 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.151 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.151 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:26:52.071 AM [0x0-0x7e07e].org.keepassx.keepassx: Found Metastream: Simple UI State
Thanx,
- GeoffMail tool seems to freeze my system at seemingly random times for a couple of minutes once or twice an hour. What's going on?
I've run permissions repair, & the disk repair run showed no problems. The disk is split into Mac & BootCamp partitions and there's about 80GB free on the Mac partition. I'm running 2 x 8GB DIMMs that have been carefully matched and extensively memtested and passed. This is an early 2011, 15 inch MBP with the 1.5 GB ATI GPU option.
The Console displays about 40 lines like this. Notice the 2 minute time delta between the 1st line in this subset from Console / All Messages:
12/19/13 7:23:22.727 AM [0x0-0x78078].org.mozilla.firefox: OpenGL version detected: 210
12/19/13 7:25:51.092 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.092 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.093 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.094 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.095 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.096 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.097 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.097 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.098 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.099 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.100 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.100 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.101 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.102 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.102 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.103 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.104 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.104 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.105 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:51.106 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.128 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.129 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.130 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.131 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.131 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.132 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.133 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.134 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.134 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.135 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.136 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.137 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.138 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.139 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.140 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.141 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.143 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.144 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.145 AM Mail: CFTimeZoneCreateWithName failed for -0500
12/19/13 7:25:52.146 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.147 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.148 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.148 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.149 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.150 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.151 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:25:52.151 AM Mail: CFTimeZoneCreateWithName failed for -0800
12/19/13 7:26:52.071 AM [0x0-0x7e07e].org.keepassx.keepassx: Found Metastream: Simple UI State
Thanx,
- Geoff -
Opencv face detection (haar detection)
For my new app I'm in need of a very solid front face detection with haar features written in OpenCV.
Now, I can do this from scratch, but I prefer to purchase this complete module from someone who already did this.
I need detection for: head position, mouth, nose, forehead, eyes regions, eyeballs, hair, lids, brows, lips, mouth corners, teeth, nostrils edges and furrows.
Can somebody help me with that?
~DennisI'd suggest you ask in the developer forum, either here or the developer forum you have access to as a member of Apple's Developer Programs (at least, I assume you're a member). You'll be more likely to get suggestions here, if any such module exists. I'm not aware of anything other than the capabilites Apple included in iOS 5 as part of Core Image, but someone else might know of something. There one was independent system - Face.com - but they were purchased by Facebook and have shut down as an independent service.
Regards. -
Error while creating request list Unable to detect the SAP system directory
We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
PrathapDid you get this solved?
I have the same problem -
i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.
The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others. -
I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?
verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible -
Forcing Face Detection for All Pictures in an Event
Aperture 3.0 fails to detect all faces in all photos in an Event. Is there a way to force face detection for all photos in an Event? As it stands now, one cannot tag photos for faces if Aperture decides (erroneously) that photos don't contain a face.
Spent ninety minutes with Apple Aperture Support, who confirmed this.I don't know how to answer your first question (force it for all photos), but I thought you could add faces / names to a photo using the Name button left hand side of the toolbar. I've used it today to add a "Face" to a photo containing two hands because I wanted to tag each hand with a Name. So I clicked Name, and drew a box on each hand and added a Name to it. So it works for a single photo but that might be a pain to do for a lot
David -
Glxinfo/glxgears freeze the system like hell
I am running the latest updated Archlinux 64 bit box:
[arnuld@gnu ~]$ pacman -Q mesa
mesa 7.0.1-1
[arnuld@gnu ~]$ pacman -Q xorg-server
xorg-server 1.4-5
I am using openchrome and X runs fine. NO freezes in normals runs but as soon as I type glxinfo or glxgears it freezes the system an I can not do anything. keyboard, mouse all stop responding as if my system is dead, the only solution is Manual Reset button on my cabinet.
[arnuld@gnu ~]$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
[arnuld@gnu ~]$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "glx"
Load "record"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30 - 70
VertRefresh 50 - 160
Option "DPMS"
DisplaySize 269 201 # 96 DPI @ 1024x768
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "PrintVGARegs" # [<bool>]
#Option "PrintTVRegs" # [<bool>]
#Option "I2CScan" # [<bool>]
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ExaNoComposite" # [<bool>]
#Option "ExaScratchSize" # <i>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # <i>
#Option "ActiveDevice" # [<str>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # <i>
#Option "TVProgressive" # [<bool>]
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "VbeSaveRestore" # [<bool>]
#Option "DisableXvBWCheck" # [<bool>]
#Option "MaxDRIMem" # <i>
#Option "AGPMem" # <i>
Identifier "Card0"
Driver "via"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[arnuld@gnu ~]$
I found one other thread with the same problem as mine but nobody replied to his 2nd question:
http://bbs.archlinux.org/viewtopic.php?id=39667
BTW, just out of curiosity , I only watch Bruce Lee's movies and do internet. I do not play games etc. So, is there any use of DRI for me ?Welcome to the world of Unichrome. Via's integrated graphics chips open gl support in Linux is very poor. I have KM400 and I got GL working with it somehow. When libgl was updated to version 7.0.1 in extra-repo installing it broke the opengl on my system. X simply locked up when ever I tried to start any opengl software. I found from the openchrome.org:
"The 3D driver that complements the openchrome driver can be obtained from the DRI project. For now you should use the Mesa-6.4 branch; the last version known to work sort of reliably is Mesa-6.4.1."
I built libgl, unichrome-dri and mesa -packages with ABS from Mesa-6.4.1-branch and installed latest openchrome -driver from svn. Now opengl with my unichrome chip works pretty "stable". Of course it can't run the latest opengl -stuff but atleast I can run Blender with my laptop. -
Tips For Improving Face Detection Accuracy
These are some rules I have slowly discovered that have helped improve the accuracy of iPhotos' face detection.
a. Don't force iPhoto to recognize *+every single+* instance of an individuals face. (If you need to create a location containing every instance of an individual, then you need to setup a Smart Folder using the persons' name as a Description or Keyword. "Faces" is not the section to do this. See a suggestion below for using "Faces" to do this.)
b. Avoid confirming really poor quality examples of a persons face (low light, pixelated, off in the distance, etc)
c. Avoid confirming only partially visible faces (hair covering half the face, head turned away to a profile, extreme angles too high or too low, etc)
d. Avoid too many instances in which the person's eyes are closed. (Obviously, sunglasses are a real problem here as well)
e. Avoid instances where the persons head is tilted 45 degrees or more, unless the software recognizes the face on it's own.
f. Avoid instances where the face has areas of heavy shadow, and the light source is at right angles to the face. (Outdoors with Sun directly overhead or near horizon.) If face is in an "even" shadow that seems to be OK.
g. Clearly, the more full frontal, clearly lit views of an individuals' face you can include, the better the face detection will be.
h. If you do use the "Add Missing Face" button, then restrict the selection box to just around the eyebrows, nose and mouth. Avoid selecting the whole head since the face detection software concentrates on the features in the center of the face. No need to include the hair as it does not appear to be a factor.
*Gathering Every Instance of a Persons' Face*
Here is how you could use "Faces" to gather every photo of an individual, yet maintain its' face detection accuracy. Mind you, this may only be practical with relatively small libraries, not libraries with 10's of thousands of photos.
1. First, go ahead and name *+every instance+* of an individuals' face (Even poor quality examples).
2. Then, within the "Faces" corkboard section, open that persons' album and "Select All" of their photos (Do this before the Faces scan is complete or you will also select all of the suggested faces under "So-and_So may also be in the photos below")
3. Next, create "New Album from selection..." and give it the name of the person. (Alternatively, you could "Batch Change..." all the selected photos with a "Description" using the persons' name and then use a "Smart Album" to gather all of the persons' photos. This could be handy for adding future photos of the person automatically to the Smart Album.)
4. Once that is complete, now "Reject" all poor quality, or partially visible examples of the persons' face within Faces. This will improve the software's future accuracy at detecting the persons' face in new photos added to the library.
If, at a future date, you add another large group of photos containing that persons' face, you can repeat steps 1 & 2 and simply drag all the photos to the persons' Album. Or "Batch Change..." the Description again to automatically include the newly added photos to the Smart Album you created earlier.
In the end I have discovered that the Faces section of iPhoto is really more a "tool" for creating Albums, rather than a destination for viewing photos.
Hope this helps. Feel free to add any suggestions you have discovered for improving the face detection accuracy.
CheersGlenn Carter wrote:
h. If you do use the "Add Missing Face" button, then restrict the selection box to just around the eyebrows, nose and mouth. Avoid selecting the whole head since the face detection software concentrates on the features in the center of the face. No need to include the hair as it does not appear to be a factor.
Apparently you shouldn't worry too much about what you select for the face area when using "Add Missing Face"... From Apple's knowledgebase at http://support.apple.com/kb/HT3427:
Note: Only faces that have been automatically detected in your photo library will help iPhoto match faces. Manually identified faces will not aid iPhoto's face-matching ability.
So, unless they later come out with an update that actually uses that data, any effort you make in selecting especially accurate face regions is going to waste. (Though I'll admit I'm still putting in the effort in the hope that the data will someday be used for something in a future version of iPhoto...) -
Hi,
I jumped from 06 to 11 so faces is a new things for me. I tried to search for a way to re-run the face detection after matching 500+ photos. Is there a way to use existing database to work on the rest of the photos?
Thanks in advance.
Cheers,It seems like one of the more requested enhancements on the forum
The official Adobe feedback forum already has 35 people requesting it: Lightroom 6/CC - Allow facial recognition feature to re-index a folder/collection. Please add your vote and opinion. -
Face detect behavior on previously tagged images
Hi,
I transfered all my previously tagged images (before face detect feature was available) to the newly created "people" tags. For example, PSE8 face detect created a tag for Claudia (my wife), I then transfered all the photos with my wife on them that I had manually tagged before PSE8. I did that for all my "favorite" faces. Of course, all the photos added to the organizer AFTER installing PSE8 have been added using this feature
PSE8 keeps asking me "Who is this?" for older photos (added before PSE8) even when these photos are already tagged with the proper face tags.
How should I proceed?
How should I handle photos that were added before PSE8?
Should I keep "teaching" PSE8 so it recognized the faces for all my pre-PSE8 images?
I have around 3,000 images in the organizer pre-PSE8
Any comments will be greatly appreciatedThanks John.
In a related question. PSE8 face detect algorithms do not seem to remember one of my favorite faces (wife wife's!!)... In every rectangle of her face, it will never suggest her name from the usual three options... it will autocomplete her name, though. Even after several sessions, it will never suggest her name.
Is this common? This behavior seems only specific to her face.
Should I delete her face tag and start all over?
What do you reccommend?
Thanks -
Problem in implements ADF Faces: Detecting and handling user session expiry
Hello everybody
I´m trying to implement a method to handle user session expiry as explained by frank nimphius in his blog.
http://thepeninsulasedge.com/frank_nimphius/2007/08/22/adf-faces-detecting-and-handling-user-session-expiry/
I have implemented the class bellow and add the filters in web.xml. However when I add the JavaServer Faces Servlet to sign the filter, my hole application get nuts. I try to publish the applicatoin in the OAS and it seems that it already starts expired.
Someone konw what I´m doing wrong?
I use the filter
<filter>
<filter-name>ApplicationSessionExpiryFilter</filter-name>
<filter-class>adf.sample.ApplicationSessionExpiryFilter</filter-class>
<init-param>
<param-name>SessionTimeoutRedirect</param-name>
<param-value>SessionExpired.jspx</param-value>
</init-param>
</filter>
then I add
XML:
<filter-mapping>
<filter-name>ApplicationSessionExpiryFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
package adf.sample;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
this is the class
public class ApplicationSessionExpiryFilter implements Filter {
private FilterConfig _filterConfig = null;
public void init(FilterConfig filterConfig) throws ServletException {
_filterConfig = filterConfig;
public void destroy() {
_filterConfig = null;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws IOException, ServletException {
String requestedSession = ((HttpServletRequest)request).getRequestedSessionId();
String currentWebSession = ((HttpServletRequest)request).getSession().getId();
boolean sessionOk = currentWebSession.equalsIgnoreCase(requestedSession);
// if the requested session is null then this is the first application
// request and "false" is acceptable
if (!sessionOk && requestedSession != null){
// the session has expired or renewed. Redirect request
((HttpServletResponse) response).sendRedirect(_filterConfig.getInitParameter("SessionTimeoutRedirect"));
else{
chain.doFilter(request, response);
I'm really having trouble controlling user sessions. if someone know where I can get materials to learn how to implements session in Jdev ADF + BC, I´m very grateful.
Thank you MarnieThe class works fine.. the issue is when I add the this code into web.xml
<filter-mapping>
<filter-name>ApplicationSessionExpiryFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
bellow the web.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app>
<description>Empty web.xml file for Web Application</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<param-name>CpxFileName</param-name>
<param-value>userinterface.DataBindings</param-value>
</context-param>
<filter>
<filter-name>ApplicationSessionExpiryFilter</filter-name>
<filter-class>view.managedBean.ApplicationSessionExpiryFilter</filter-class>
</filter>
<filter>
<filter-name>adfFaces</filter-name>
<filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
</filter>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>ApplicationSessionExpiryFilter</filter-name> ==> the problem occurs when I try to add this code
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>1</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/pain</mime-type>
</mime-mapping>
</web-app>
By the way, how can I post code on the forum properly? -
Why No Face Detection for Mobileme Gallery?
I know to perform face detection, i goto Events, select a photo, then click the "Name" icon on the bottom toolbar, type in the name, and iPhoto will take care of the rest.
But when i open the Mobileme galleries in iPhoto and select photos, there is no "Name" icon on the bottom toolbar. How could i perform the face detection for mobileme photos then?
Help very much appreciatedYou can't. You'll need to do your naming with the versions in your Library.
Regards
TD
Maybe you are looking for
-
My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.
-
Hello, I tried to use CVI device drivers under LabVIEW 6i. The problem ist that the device driver DLLs are missing. Is it possible to create these DLLs without LabWindows, or create them with LabVIEW? I tried to create them with a gnu compiler, there
-
For example, I went to Netflix site(which I am registered at) and I immediately get a screen which asks me to enable cookies and gives me different links for instructions on how to enable cookies for different operating systems.
-
I've attempted to download Mac 10 Maverick and I keep getting a download error, any ideas?
I've attempted to download Mac X Maverick and I keep getting a download error, any ideas?
-
Prevent Personal Sites from showing in search
Is there a way to prevent the personal site from showing in search results? It seems to only happen for certain users I dont want /personal/username to appear in search results thanks themush