Face time between usa and uganda

I like to use the face time between USA and Uganda
In USA - device to be used is ipad2  and in ugand - device to be used is iphone 4 ,is it possible to do face time ?
secondly i am unable to add ugandan mobile number to my contact in ipad 2  ,the international code is 256 + mobile number.
what is the format i need to use to add uganda iphone number to my ipad contact list.

if i need to try with phone number, please let me know the format of number i need to save in my ipad contacts, in my orginal request , i explain the scenario i am looking for , thanks

Similar Messages

  • Can two apple devices registered to same apple ID face time with each other. My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Can two apple devices registered to same apple ID face time with each other? My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Trying to connect with face time between my iPod touch and my macbook but it always say user is unavailable  even after i accept?

    trying to connect with face time between my ipod touch and my macbook. It rings i accept but it then says unavailable?

    - Common problem with Yahoo.
    - Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    - Some users have had to change their Yahoo password.

  • Face Time Between U.S. and Germany

    How can I connect Face Time between two iPhone 4 devices, one in U.S. other in Germany?

    Yep. I do it all the time. You need 10.6.8, then get the FaceTime app from the Mac app store.

  • HT204380 can you face time between 2 devices which are registered to the same email address

    can i use face time between my iphone 4s and my sons ipod touch 4th gen eventhough they are both registered to the same apple account and same email address?

    Yes you can. You just need a unique e-mail address on the iPod to call. I can FaceTime from my phone to my iPad since we have my wife's e-mail as the FaceTime contact.

  • How do I face time between my own iPads?

    How do I face time between two I pads with the same owner?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • "logon time" between USR41 and security audit log

    Dear colleagues,
    I got a following question from customer for security audit reason.
    > 'Logon date' and 'Logon time' values stored in table  USR41 are exactly same as
    > logon history of Security Audit Log(Tr-cd:SM20)?
    Table:USR41 saves 'logon date' and 'logon time' when user logs on to SAP System from SAP GUI.
    And the Security Audit Log(Tr-cd:SM20) can save user's logon history;
    at the time when user logged on, the security audit log is recorded .
    I tried to check SAP GUI logon program:SAPMSYST several ways, however,
    I could not check it because the program is protected even for read access.
    I want to know about specification of "logon time" between USR41 and security audit log,
    or about how to look into the program:SAPMSYST and debug it.
    Thank you.
    Best Regards.

    Hi,
    If you configure Security Audit you can achieve your goals...
    1-Audit the employees how access the screens, tables, data...etc
    Answer : Option 1 & 3
    2-Audit all changes by all users to the data
    Answer : Option 1 & 3
    3-Keep the data up to one month
    Answer: No such settings, but you can define maximum log size.
    4-Log retention period can be defined.
    Answer: No !.. but you can define maximum log size.
    SM19/SM20 Options:
    1-Dialog logon
    You can check how many users logged in and at what time
    2-RFC login/call
    Same as above you can check RFC logins
    3-Transaction/report start
    You can see which report or transaction are executed and at what time
    (It will help you to analyise unauthorized data change. Transactions/report can give you an idea, what data has been changed. So you can see who changed the data)
    4-User master change
    (You can see user master changes log with this option)
    5-System/Other events
    (System error can be logged using this option)
    Hope, it clear the things...
    Regards.
    Rajesh Narkhede

  • HT204380 My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

    My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

    I can call my ipad with my iphone alll the time.  That's how I check up on my kids at home when I"m at work. You just set up to your iphone's facetime setting with your phone number and set up your ipad's facetime settings with your apple id (in this case it's your email)

  • Best way to capture data every 5 ms (milli-seconds) in the .vi diagram when using "Time between Points, and Small Loop Delay tools" ?

    - Using LabView version 6.1, is there anyway to change the "Time Between Points" indicator of (HH.MM.SS) to only (mm.ss), or to perhaps only (.ss) ?
    - Need to set the data sampling rate to capture every 5 milliseconds, but the defaults is always to 20 or greater; even when the "Small Loop Delay" variable is adjusted down. 
    Thank you in advance.

    I have no idea what "Time between Points, and Small Loop Delay tools" is. If this is some code you downloaded, you should provide a linke to it. And, if you want to acquire analog data every 5 milliseconds from a DAQ board, that is possible with just about every DAQ board and is not related to the version of LabVIEW. You simply have to set the sample rate of the DAQ board to 200 samples/sec. If it's digital data, then there will be a problem getting consistent 5 msec data.

  • Do you need different apple id to face time my iphone and ipad2?

    At home i am unable to face time my iphone4 and my ipad2. The only conclusion i came up with is that the apple ids are the same. Does anyone know if this is the problem?

    Without knowing the Apple ID and password that has been used to set up the phone, the phone can't be restored. Check this article:
    iCloud: Remove your device from Find My iPhone
    What if I forget my Apple ID password?
    If you forget your password, you can reset it at My Apple ID (appleid.apple.com) or by contacting Apple Support and verifying your identity.
    If you forget your password and cannot reset it, you will lose access to your Apple ID and may be unable to use or reactivate your device. To help prevent this, visit My Apple ID periodically to review and update your account information.

  • Face time over iPad and iPhone

    Hello all,
    I have a question about face time over iPad and iPhone.
    I have iPhone4S with ios6 and have unlimited data plan from Verizon in US.
    My friend, who has new iPad NOT iphone with iOS6 and currently lives in UK.
    Since iOS6 provides FaceTime over 3G/4G, do I get charged if I make a face time call with my 3G network?
    I know that I don't need to pay if I use wifi. I also believe that my friend won't get charged since his iPad only works through wifi.
    Any information will be much appreciated.

    One more thing to consider if you're using your iPhone to FaceTime to your friend in the UK:
    Sometimes, the iPhone will make the initial FaceTime contact as a telephone call, then switch to FaceTime.  So if you use Verizon (as opposed to WiFi) from your iPhone, you might get charged for a brief phone call to the UK.

  • Can't use Face Time between my devices

    I have an iPad 2, an iPhone 4S, & a 4th gen iPod.  Until recently I was able to Face Time between them all.  Now when I try to make a call it says that I'm unavailable.  I have read the generic troubleshooting article & tried all those things.  None of them have worked.  Does anyone have a suggestion for possible solution?

    Can you FT other devices?
    iOS: Troubleshooting FaceTime
    Are you calling an email/phone number not also used for FT on the calling device?

  • Is face time between Apple devices free if one person is in France and the other person is in the U.S.?

    IS face time free between two persons if one person is in France and the other person is in the U.S.?  One is on an iPad Mimi and the other an apple laptop or iPad.

    It uses the internet. If either person has wi-fi it can be done on that, otherwise it will use cellular data count against one or both persons cellular data plan.

  • How do you do face time between an I phone 4 and an Imac when in wifi?

    Hi! can face time work between an Iphone 4 and an Imac using wifi?
    Thanks for the inputs.

    Welcome to Discussions, Butch Juinio
    Butch Juinio wrote:
    Hi! can face time work between an Iphone 4 and an Imac using wifi?
    Thanks for the inputs.
    Yes. (The iPhone4 must be on wi-fi.)
    All FaceTime contact on any device is made via the internet.
    iOS devices like iPhone must connect via wi-fi because that is the only way they connect to the internet.
    Macs can connect also to the internet via ethernet, so Macs can FaceTime either wired or wi-fi.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3

Maybe you are looking for

  • Idoc issue - canbe fixed with enhancement?

    Hi idoc Gurus, I have issue related to idoc. We have extended the DEBMAS with one custom segment(Z1KNA13). Custom segment(Z1KNA13) has three fields. one of the field is to store customer's second address line(cust_address2). When someone changes the

  • Incomplete process in BPM

    Hi, In my scenario, I have 3 different Idocs (ADRMAS,CLFMAS,CREMAS) to be collected and send to single target message. To achieve this I have used "fork" step in BPM. Idocs of each type (like either ADRMAS/CREMAS/CLFMAS) would be collected in contain

  • How to create authority check

    how to create authority check and how to apply for kunnr field near at selection-screen for validating this field, i mean is there any tcode for it becoz when i click on pattern button it ask authority check objectname (der r some inbuilt object alre

  • Ipod doesn´t support Apple Lossless Audio Codec with high bitrates?

    Has anyone tried playing back .m4a files with bitrates in the range of 800-850 kbit/s succesfully? I have a recent 30Gb and a 4Gb Nano both with latest firmwares, but neither of them will play my files without hanging/restarting. Specifications claim

  • Is the Power Button suppose to light up?

    Hi, I remember Macbook Pro's power button would light up with white light when it is on. My Macbook Air doesn't seem to light up the power button. Is it suppose to be like this?