Face time for macbook pro

When people try to contact me through face time it says i am unavailable. How can I fix this?

they must contact you by email try restarting and also can try sign out and back in

Similar Messages

  • Slow Shut Down Time For Macbook Pro Retina Snow Leapord

    Hello, I was hoping somoene could help me with the following problems.
    I have brand new Macbook Pro Retina, 15inch, 16G RAM, 500G of SSD, running Mountain Lion, and lots of professional recording software. My macbook frequently shuts down after 30 seconds, that wonderful grey wheel spinning in the center of the screen as if it were an old PC.
    I've contacted apple frequently. They check to see that I've repaired disk permission, they reset...the RAM i believe, they ask if i shut down all the programs. Even through doing all of this, usually my macbook takes 30 seconds to shut down. Sometimes it takes only 5, which is how it usually should be. ANd this occurence seems to be inconsistent with the apps I use. Sometimes it takes long to shutdown when i've barely used a thing. Other times it shuts down immediately when i've used a lot of different programs at once. So there's no constant.
    The apple boys suggest reformatting the computer to make sure it isn't a hardware issue. I refuse to accept that after only 3 months of use I already have to reformat everything. It's not the most enjoyable experience because I'd have to reinstal all my audio software despite Time Machine's magic tricks. Any suggestions?
    Here is a link I've found on the matter: http://thecustomizewindows.com/2013/02/fix-mountain-lion-slow-shut-down-time/

    These terminal commands decrease the excecution time of a process that has caused slow shutdown times for many users. This resolved my slow shutdowns. IF you are comfortable using terminal you can give them a shot, but be VERY careful using terminal.
    These terminal commands should also fix the problem then and kill the services after 2 seconds:
    Code: 
    sudo launchctl unload /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist  sudo defaults write /System/Library/LaunchDaemons/com.apple.coreservices.appleevents ExitTimeOut -int 2  sudo launchctl load /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist

  • What is the usual turn around time for MacBook Pro repairs?

    I took my Early 2011 MacBook Pro in for service at an Apple Store last Saturday (10/12) and they decided to send it to the repair depot, so I paid the repair costs and gave them my MacBook. I was told that it would be shipped out that night, over-nighted, repaired, then shipped back to me. They said it's usually a 3-5 day turnaround.
    I've been checking my repair status frequently for any updates, but "Shipment to repair center pending" has been the only thing it's shown since Saturday (I do understand that shipping estimates can be delayed). Yesterday (Mon.) I called the store to ask why this was showing and to get an update. They told me that shipping services don't run on the weekends or Columbus day, so the computer should probably reach repair by Tuesday. First, this isn't accurate unless it's specific to the Apple Store because all shipping services besides USPS run on weekends AND Columbus Day isn't a recognized holiday. Second, Tuesday has passed and I'm still only seeing "Shipment to repair center pending".
    This is pretty frustrating. I'm already behind on work and school work because of this (which is fine because I expected the 3-5 days), but I can't afford to be in this situation much longer than that.
    What I'm wondering is, what is the usual repair time that others have experienced? When should I start to investigate this more and who do I contact? I'm worried that the store will keep giving me the same response.

    I made a super simple tool for tracking repairs done by Apple/Genius bar so users can get text message updates on their order status.
    http://ipv6dns.co/trackmyrepair.php

  • Not connect face time on Macbook Pro

    I try to connect face time by apple ID and i'm waiting any long time,but it's not finish connect yet.

    I,
    I have a macbook pro since last year and face time does'nt work correctly and i dont know why. I have the right version to download. Every time i try to open it, i received a error message. It's say that Face time has a internal problem and could'nt open. All my friends had no problem.
    Please help me to fix it

  • Current Delivery Times for MacBook Pro 15"?

    What can i expect the delivery time to New York to be with a 256gb SSD and 8gb of RAM and anti-glare screen?

    After you configure your laptop on the apple store, when you choose your shipping preferences it will show you an estimate.

  • Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straig

    Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straight to my phone instead of my MacBook Pro. Help!!

    Any error message?

  • Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
    Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
    There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
    ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
    http://www.stratospherix.com/products/filebrowser/
    Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
    A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
    You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

  • Set up time machine for macbook pro on WD passport

    how do I set up time machine for macbook pro on WD passport? I keep getting a message that the Passport needs to be erased but when I try to ease it it tells me it can't be . 

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

  • How to download face time for my MacBook ?

    how to download face time for my MacBook ?

    Hi,
    Currently FaceTime for Mac is a 99¢ app and only available via "App Store" for Mac.  Make sure you have the latest Mac OS installed (10.6.7), and launch App Store from your dock (you can also access it by clicking on  and choose "App Store...")  you can then purchase it through there.
    -cwdlin

  • Every time my MacBook Pro is put to sleep, it will not connect to the internet when reopened unless diagnostic assistant is performed. Ridiculous!

    Every time my MacBook Pro is put to sleep, it will not connect to the internet upon reopening unless I perform diagnostic assistant.

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
    Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. Reinstall OS X.

  • How can I know if my new internal hd for macbook pro is compatible?

    I have been trying to upgrade my internal HD for macbook pro early 2008 2.4 and have been having a hard time getting it to boot.  Problems with both WD and Seagate.  I am wondering if the problem is with Mavericks.  I got a good back up from Time Machine to load on the hybrid drive.  Then when I try to restart it shows the apply symbol with no chime and then a black screen comes over the blue screen with some code (strange problem I have never seen) I can see that all the data is on the drive.  I was able to partitian in disk utility.  Anything ringing a bell.  I have done several switches like this and this is the first time I have had so much trouble.  I reinstalled my old drive just to make sure there was not another hardward issue and everything is fine there.  In fact I have a new logic board freshly installed by mac. 

    Your machine has a SATA 2 interface and I'm sure the new drives are SATA 3. They should still step down and work though. It's possible your SATA cable is marginal and the newer drive is trying to demand more out of it than the old one did. A good test would be to put the new drive in an external enclosure and see if it works ok from there. If so, it's probably the cable.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1394657992&sr=1-2&keywords=2.5+enclosure
    How did you install Mavericks on the new drive?

  • What Blue Microphone is best for MacBook Pro?

    I am thinking of the Blue microphones' snowball or the tiki mics.  They are both portable and have excellent reviews for MacBook Pro users, and can use in Garageband for voice overs audio to put in iMovie/FCPX...

    Hi Melophage,
    Thanks for your helpful reply
    I bought a new MacBook 13.3 / MacBook Pro 15-inch Superdrive 9.5mm 8x
    Part No. : 661-4279
    For hard drives, I have a choice of:
    1)   W. Digital Scorpio Blue SATA 3GB/s   5,400rpm   8MB   2.5"  500GB
    2)   W. Digital WD7500PPVX  SATA111   5,400rpm   8MB   2.5"   6GB/s   750MB
    3)   W. Digital Black  9.5mm   7200rpm   16MB   SATA   6gb/s
    Will any, or all of these be  installed and function easily in my A1260 Macbook Pro?
    Again, thank you for your help,
    Tim (fridgemagnett)

  • What is the best antivirus for MacBook Pro?

    What is the best antivirus for MacBook Pro?

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. XProtect, Gatekeeper, and MRT reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • Latest update for MacBook Pro causing spin issues  :(  Any suggestions?

    The Latest Update for MacBook Pro is causing my computer to hang....I hate updating for this reason...seems it always happens...Any suggestions?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Operating Temperature Limit for MacBook Pro

    The specifications, for MacBook Pro, mention that the operating temperature is 10 to 35 Deg C. Does it mean that MacBook Pro will not function above 35 Deg C? Is it recommended to operate MacBook Pro always in an air-conditioned environment? As I plan to buy for the 1st time, I seek an answer.

    You will find that if you use applications that are CPU intensive the internal temperature can go over 100 C.  This actually is within the safe operating parameters of the MBP.  Should the temperatures become excessive, there are heat sensors that will activate a shutdown so that no damage will occur.
    You might download from the Internet a utility called iStat pro that will show you the internal temperatures of your MBP and the fan speeds.  You can then correlate this information with Activity Monitor data and determine if the temperatures are normal for the given circumstances.
    Ciao.

Maybe you are looking for