Face Time from  OS 6.1.3 to OS 7 not working

I am trying to make call from an iPod using OS 6.1.3 to an iPad using 7.0.2 and it will not connect. If I make the call from the iPad to the iPod the connection is great. The iPod's OS is not upgradable.
Any suggestions?

You said:
The iPod and iPad are two different Apple IDs and Wi-Fi only. Am I correct in understanding that under these conditions Face Time uses the email registered in the Apple ID?
What do you mean
What I would do would be to delete the contact for the "person/device" you are calling. Have them/device call you and then save the caller/device in your contacts and then try to call the perso/device back.

Similar Messages

  • Face time from my IPhone 4s to iPad 2 is not working but Tango working.please help

    Hi
    After shifting to my new home, my face time from IPhone 4s to I pad 2 is not working, it shows the sign connecting .......... But never able to connect. On the other hand when I called other person it is working ? Please help

    Where did the photos on the iPhone come from? What is in Camera Roll on the iPhone?
    Have you tried restarting or resetting your iPad and iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • I am trying to face time from my facebook to my ipad by clicking on my email address in face time but it doesnt work, what am i doing wrong?

    trying to face time from my macbook to my Ipad butit wont work when i click on my emal address what am i doing wrong?

    so are the mac and ipad on the same itunes id and same email account via facetime in settings on ipad if there on the same receve calls from email then when you click on your email adress its like your trying to call to the exact mac does that mac sence

  • Face time from ipad2 to another ipad?

    Wondering how to face time from my ipad2 to my sisters ipad 4th generation?

    You might start here: http://help.apple.com/ipad/7/#/iPad99bb5ac9

  • TS4268 Can I have face time from my iPhone to my iPad?

    Hello with ios5 I had face time from my iPhone to my iPad but now with ios6 I can't.can anybody help me

    If the apps are compatible with the iPad (e.g. iOS version and they don't require full phone capability) then as long as they are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519

  • If my daughter calls me on face time from her iPad and she doesn't have wifi, will it be used as data and use a lot?

    If my daughter doesn't have wifi and we face time, will she use data on her end?

    Note that not all carriers allow FaceTime over a cell connection, and some that do require you to sign up for specific service plans. As to data usage, a report on The Unofficial Apple Weblog indicated that a  47-minute FaceTime call over 3G used about 65 megabytes of data. You can estimate your usage from there.
    Regards.

  • Face Time from Mexico

    Did a Face Time from San Carlos Mexico to New York City for 1/2 hour...worked fatastic at no cost! Face Time does has some issues with corporate firewalls and I don't know how many corporate IT guys are interested in opening the ports to allow for it. They seem to get nervous at the idea of messing with the firewall. If they would open up Face Time to ichat it would expand the possibilities for us early buyers.
    I have used the original iphone since introduction and was very happy until now. Now, I am estatic. My iphone 4 with the bumper does not drop calls (I bought a case for my old phone too), great email contacts and calendar from our corporate exchange server, has great camera and video, terrific applications, an unbelievable display.... I can't believe the streaming video I get through Etrade from CNBC. I am sorry that some are having problems, but out of 2 million phones there may be some lemons out there?

    You hit the nail on the head. My wife and I tried a facetime call when we were both under WiFi at home. When we tried testing it at the mall (where we ordered the iPhones from an AT&T store), the Face Time didn't work. So we marched into the AT&T store and asked why. The associate told us that "for security purposes, Port 40 is closed." No wonder they didn't want the phones delivered to the stores. People might ask questions! Face Time requires Port 40 to be open in order to operate. The only logical explanation for this is that a couple of perverts could misuse the application to transmit restroom shots or something. So you and your Face Time partner need to both be in a WiFi area, and both of you need to have Port 40 open. Now, I cannot see this being a problem if one partner is home and the other is at an out-of-town hotel.

  • I live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

    i live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

    Doesn't matter.  That store is likely selling illegit iphones, brought oin from somewhere else.
    The fact remains the UAE government does not allow Facetime on iphones legitimately sold there.

  • TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

    I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

    Thank you for heading me in the right direction.  I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information).   I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)??  In the Advanced box I clicked on "Use custom port:  465" and checked "Use Secure Sockets Layer."  Authentication:  Password; I have correct User Name and Password put in.  After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there. 
    What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message:  "Cannot send message using the server smtp.att.yahoo.com (etc.).  The SMTP server doesn't support TLS(SSL) on port 587.  Verify your account settings and try again."  That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails.  I guess my next step is to contact my email service provider, AT&T, and see if they can help me.  Thanks, again, for taking the time to respond and for giving me your input!  Much appreciated!

  • How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

    How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

    hi
    You cannot move audio from the viewer
    Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
    PJ

  • HT4859 every time I try to restore my ipod it does not work...how come?

    every time I try to restore my ipod it does not work...how come?

    The only way to clear off the passcode is to restore the device.  You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.

  • How to remove passcode from ipod touch 3g  if power botton is not working?

    how to remove passcode from ipod touch 3g  if power botton is not working?

    Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • After upgrading from 4.6C to ECC 6.0 templates not working in smartform

    Hello,
    After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
    Please note - Text elements doesnot have any conditions present in the condition tabstrip.
    Thanks,
    Abhishek

    Hi,
    After the upgrade, you will have to do the security upgrade.
    Please follow these steps.
    1. Go To SU25
    2. Run step 2A to 2D.
    3. In step 2C, you shall get the list of all the affected roles.
    Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
    Note: You can open the same role in the unupgraded system to check.
    4. Provide the access to the required authorization objects.
    5. Disable the unwanted authorization objects.
    6. Generate the profile.
    7. Follow the same steps for all the affected roles listed.
    Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
    8. After step 2C, complete 2D.
    Regards,
    Imran

Maybe you are looking for

  • I want to create a contact sheet in Bridge CC and there isn't an output module..

    I don't seem to have the Output Module for Bridge CC. I read how to copy and paste it into the Bridge Extensions folder. It did copy it, and it did add "output" to my menu bar but the content area is blank, so I cannot pick my PDF output options for

  • Batch Change "Date Modified" to match Exif Data After iPhoto Export

    Among several other posts about similar situations, I have found none that directly and simply resolve this issue. My wife imported a bunch of photos into iPhoto directly, but I wanted them in a folder on the hard drive. I pulled them out of iPhoto i

  • HT3235 VGA adapter not matching up to Monitor/video port

    I have an inFocus LP70+ Projector along with a Apple VGA adapter (Apple part M8639G/A). Am trying to connect it with an older iMac 8,1 desktop and finding that the Monitor/video outport does not match up to that adapter. Help?

  • DB link for physical standby database

    Hi All , I'm facing the below error on primary while trying to create a db link pointing to the 10g standby database which is in mount stage. SQL> create database link synct connect to system identified by 123 using 'stdby'; Database link created. SQ

  • Want to know what is j_security_check

    Hi, i want to know what is j_security_check is. i am getting an error when i am logging in to an application. " The request sent by the client was syntactically incorrect (Invalid direct reference to form login page). " Thanks in Advance