Face time was working very good but suddenly I can't make any call ! I have iPad mini
face time was working very good but suddenly befor 3 days I can't make or receiv any call. I have iPad mini iOS 8.1.3
Hi Sunlightbm,
Sorry to hear that you cannot make any FaceTime calls. If you have not done so already, take a look at the article below to go over some general troubleshooting to get it back up and working again. Check the settings on your iPad for things like Date & Time is set correctly to making sure your connection to the internet is good.
If you can't make or receive FaceTime calls
http://support.apple.com/en-us/TS3367
Take it easy,
-Norm G.
Similar Messages
-
I have bought new i pad2 from singapore. Working very good but suddenly from last two days wifi signals started dropping. Having problem to get proper wifi signals even at my home as comparitively with my other devices like iphone4 and pc's. Please suggest some conclusion and tell what to do.
ThanksBikramvenus-
I believe an iPad 2 is still within the warrantee period. I suggest you contact Apple for advice on how to proceed. Since I don't know where you are, you can start by going to <Country> to select a different location. Then look for a Support tab and a Contact Us link.
Another alternative is to search for an iPad repair center. If you are lucky, there may be one in your city. I do not know what they might charge.
Fred -
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
i buy my ipod touch like 6 months ago it was working very well but yesterday it is not connecting to the internet when i am connect to my internet it said unable to connect can you please tell me plz help me
Do other devices successfully connect to the router?
Does the iPod successfully connect to other networks/routers?
Does the iPod show wifi bands in the upper left?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on the router
- Resetting networksettings: Settings>General>Reset>Reet Network Setting
- The troubleshooting here
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
my xtreme tong-its seems corrupted...before it was working very well, but for several games played it stop working, i tried remove and re-install it but nothing happens. Can you please tell me what to do in fixing this particular game.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
i was using ios 7.0.3 nd it was working very nice but before some days i got an update 7.0.4 nd i updated and now my iphone is getting switch off while using nd restarts..???? what to do
Sorry you cannot go back to previous version once your are updated to the latest iOS version.
Apple prevents downgrading your phone. -
Good day! Whow can I make a Remote Acess by iPad to another server.
Best regards.
Durval FariaWhat kind of server are you connecting to?
There are many Remote Desktop apps for the iPad. These will let you connect to a Windows server or desktop. There are also an app or two for connecting to a Mac but I have never used them so I'm not sure how they work.
You can also try LogMeIn. It works on just about anything. However, the LogMeIn app for the iPad costs $30. -
HT204023 I was working with it but suddenly after a while i couldnt even see the icon
I was working with it but after a while I couldnt even see the icon .. Funny ha???
1) Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
If no joy...
NEXT:
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
2) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
3) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I can't make any call but i can send message
Dears
the black berry 8310 the pin ####### model # 8310 IMEI ****************** prd 15562-011
I can send and receive messages but i cant make any calls. please let me know what do know???
thx
EDIT: Removed personal informationTry a Battery Pull:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://store.berryreview.com/product.asp?id=27660&n=QuickPull-Free
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Under Options>Mobile Network, check the settings there. You may be roaming and hence your data services could be "Off when roaming" and your network selection mode could be set to "Home only". Change these and it may work.
Other than that, I would suggest talking to your service provider since this may be an issue at their end.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks -
I have skype credit but can't make any call (credi...
I have skype credit recently but can't call to any mobile or landphones in my home country India. What ever number I am dialing is ringing but no answer, that means the ringing tone I am hearing is not the actual ringing. I have checked with the person to whom I called through skype, they are saying that they are not getting any call. I have still my skype credit. Kindly help.
I have skype credit but can't make any call
-
pourquoi lorsque je charge un projet sur cs4 il apparait,mais dés que je clique sur une fonction mon écran devient blanc et le logiciel ne répond plus?je travaille avec ce logiciel depuis 2008.Merci de bien vouloir m'éclairer.André
Nobody can tell you anything without proper system information and other details.
Mylenium -
So what do I do next I put the cd in it doesn't read it in itunes, worked before doesn't now. Upgraded the driver software ofr the toshiba optical drive no avail.
Hi KT. I restored my information back to November 10th and the one app that I need the info on is still empty like I just downloaded it. Do you have another suggestion? I was able to track down my serial number but can't get the UDID without plugging it in and I no longer have it. Suggestions?
-
Can't make any FaceTime calls, but can receive calls
Any advice on how to enable outgoing Facetime calls on an iPad 2.
I have set Facetime up with my Apple User ID and several people have been able to make Facetime calls to me and they work perfectly. However, if I try to initiate a Facetime call to any user, I always get the message that they are unavailable for Facetime. I have checked with each of them that I have the correct emails in my contacts that is associated with their Apple IDs and with their Facetime, but still I can't make any calls to them.
I have not found anything in the Apple support pages that is effective. I have also completely wiped the iPad back to the just out of the bax stage and set it up from scratch as a new iPad, but that didn't help at all. I have also reset all settings, tried changing the DNS to 8.8.8.8, but nothing seems to make any difference. It will not make any outgoing calls with facetime, but is happy to receive them.
Am I missing something obvious ?
It is an iPad 2 (wifi and 3G model), but doesn't have a 3G SIM installed yet. I understand Facetime doesn't use 3G, only wifi.You might be right about the email thingy.
I have managed to overcome the problem somewhat by getting the contacts I couldn't call to Facetime me on my MacBook Pro. This leaves their contact details on the Recents list in the Facetime window. I was able to click on these contact details to make a reply call. I then added them to the Favourites list (click the > symbol next to the recent contact and click the Add to Favourites button). The email address appears the same as before, but the one in the Favourites list works. -
My Face Time was working and now it's not. I have checked for updates, toggled it on and off, checked date and time? Help...now what?
Facetime does not work on Classic operating systems, neither does a MacBook Pro work on Classic operating systems. iOS does not sync with Classic operating systems, nor can it be installed on anything other than iPhones, iPads, iPod Touches. Please go to Apple menu -> About This Mac to tell us your Mac OS X version. That will help someone get your thread in the right location.
-
I can't make a call but can receive it
Dear Support;
one week ago suddenly I don't know why but my call was dropped. After that I can't make a call any more. I can send SMS and receive it. Also others can call me.
I put my sim cart to another Iphone and tried to make a call. I could make call by that phone. Also apple support guided me to restore my phone by ITunes and check it again. the result is negative. still I can't make any call.
My Phone is Iphone 5s.
Please support me to solve my problem.Plastic packaging film?
Maybe you are looking for
-
Profit center report does not show selection criteria
Hi, The SAP Business One software misses a functionality : When creating a financial report, you can enter surtain selection criteria in order to shift the data, and in order to get only the relevant data. This is possible in all reports. Also, in th
-
Hello, I would like upload a excel file in Webdynpro for ABAP and I get the data in a attribute in the context node. The data is there in Binary format. If it is possible to get the data in the ASC format like the function "ws_upload"? I had tested w
-
SAP Scripts for Stock Removal and Stock Placement ?
Hi All, Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ? Thanks, Raj
-
Hi All, We need a report in following format for current fiscal year. Products go on FIFO basis. I tried deriving the summary sale for for current year (Item wise) but what will be the starting point to pick GR -POs ? I'm unable to devise logic for t
-
hi! i've some codes: For i in 1..4 loop gp:='pollquestion_rec.Option'||i; htp.p(gp); htp.p('<BR>'); end loop; i expected to see the actual records return but i see the output as follows: pollquestion_rec.Option1 pollquestion_rec.Option4. but if i typ