Facebook check-ins set to "Only Me"

Hey,
For some reason, my check-ins are set to "Only Me" (or "Myself & anyone tagged" if I tag people). My privacy setting for status updates works consistently with my normal privacy settings. I'm not sure why the check-ins are private
I've tried changing the privacy settings through my Blackberry and on my computer, but nothing I've done seems to work. Hope someone can help me!
Thanks!

I had the same problem.
Go to privacy settings on facebook
Click on edit settings on the Ads, Apps and Websites row
You will see the privacy settings for ''Old versions of Facebook for mobile'' set as ''Only me''. Change that to you preferable settings

Similar Messages

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

Facebook App - Locations/Check Ins

I installed the Facebook app on my iPhone yesterday and through human error, when it loaded I said NOT to use the Check-In. Now I'm trying to use it and I'm getting an error that says "Location Services are disabled. You must enable Location Services to view nearby places and check-ins." How do I do this??
I went to Settings and scrolled down to Facebook - all of the settings are turned to On. I deleted the app and then re-downloaded it, but it still has the same error.
Any help would be greatly appreciated!
Thanks!
Kari

I tried reloading yesterday to no avail. Not sure what triggered this as it used to work fine before.

Won't keep "sync only checked songs" setting

I am trying to sync only the checked songs to my ipod. The problem is that when I change the setting to "sync only checked songs," it still syncs the unchecked ones. When I eject my ipod and then reconnect it, the "sync only checked songs" setting is off again. I've tried both hitting apply, and then syncing, and syncing multiple times. Very frustrated. Has anyone else encountered this problem?

It's been a while since this question was asked... maybe you figured it out?
I found a trick that seems to get iTunes to re-evaluate what needs to be removed from the iPod. You change the "sync checked songs/videos" option back-and-forth. See this: https://discussions.apple.com/message/17344534#17344534

Prevent Scheduled Build from Running for Check-Ins Committed by Build Server

Hi there,
I am using TFS 2013.
I have a scheduled nightly build that runs only when there have been check-ins.
The problem is that my build process checks-out/in a couple files used for custom versioning. This is done under the machine account of the build server.
Even though no check-ins were committed by developers - the scheduled build sees the check-ins done by the build server and thus, executes another nightly build.
Is there a way I can prevent scheduled builds from running if the only check-ins were from the build machine?
Cheers,
Keith

HI Keith,
I don't think we can achieve this kind of conditional trigger from TFS build definition. We had a similar situation so we disabled the TFS build and started the build using Powershell (windows scheduled task). Below is the powershell script. The scripts
gets the history for the day and checks for the user passed as parameter if even one changeset is not by the user the script will queue a build.
Param(
$BuildUser = "Account\ToIgnore",
$TfsUrl = "http://ABCD:8080/tfs/Collection",
$TeamProjectName = "TeamProject",
$BuildDefinitionName = "BuildDefinitionName")
$today = Get-Date
$yestday = (Get-Date).AddDays(-1)
$Daterange = $today.ToString("Dyyyy-MM-dd HH:mm:ssZ") + "~" + $yestday.ToString("Dyyyy-MM-dd HH:mm:ssZ")
$tfsServer = get-tfsserver $TfsUrl
$Changeset = Get-TfsItemHistory -Server $tfsServer -HistoryItem "$/TeamProject/XYZ" -Version $daterange -User $BuildUser -Recurse
$Changeset | Out-File C:\Windows\temp\Output.txt
$TriggerBuild = $False
foreach ($user in $Changeset)
if ($user.Owner -ne $BuildUser)
$TriggerBuild = $True
break
if ($TriggerBuild)
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.Client")
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.Build.Client")
$tfs = [Microsoft.TeamFoundation.Client.TeamFoundationServerFactory]::GetServer($TfsUrl)
$buildserver = $tfs.GetService([Microsoft.TeamFoundation.Build.Client.IBuildServer])
[Microsoft.TeamFoundation.Build.Client.IBuildDefinition] $BuildDefinition = $buildserver.GetBuildDefinition($TeamProjectName,$BuildDefinitionName)
[Microsoft.TeamFoundation.Build.Client.IBuildRequest] $BuildRequest = $BuildDefinition.CreateBuildRequest();
$buildserver.QueueBuild($BuildRequest) | Out-File C:\Windows\temp\Output.txt
Hope this help
Bharath
Regards, Bharath
LinkedIn:

"Your change couldn't be saved. Check the Setting ...

I've been having this issue all day.
From 4 different Platforms;
HTC EVO 4g
Windows Vista on my Fujitsu Laptop
MacBook Pro
Iphone 4
I have a current/valid Premium Skype account with an Online Number
Everytime I try and change a call forwarding setting (on/off or enter a # to fwd to), I get the error message
"Your change couldn't be saved. Check the Setting and try again."
I've rebooted everything., uninstalled, reinstalled, updated, checked for updates, All of my privacy settings are set to Anyone/Everyone, the only thing I haven't done is called an exorcist.....oh wait I'm on the phone with Microsoft...(Parent Company for Skype) and.......They first point me to this website.....I decline the info, letting them know I've searched all the forums and support both Skype related sites had to offer and they xfer'd me to a tech support rep who should be able to assist and All they can do is point me back here.
So here I am. Please help me.
Thank you in Advance

Sorry, I just found more relevant thread. I have posted it again..
http://community.skype.com/t5/General-Discussion/Call-Forwarding-Problem/m-p/1273728#M62811
I am also getting the same message. I am trying to set up call forwarding in "skype client".
I have malaysia mobile phone number from "maxis hotlink". I am trying to forward all skype incoming calls to my online number and skype client to my mobile phone number in Malaysia. But every time I click on save button, it shows " settings not saved" "sorry. your new settings could not be saved at this time. please try again later."
I can set up call forwarding number in skype secure login page in the website. But it is not working as well.
This is something very serious as before 24 hours everything was fine.
I am premium skype user with 4 subscriptions and an online US number.
Contacted skype live chat agent but he was so dumb to help me. !

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

How can i check my setting details are correct on my iPhone I recevied an error when sending a text this morning and while checking it out noticed my state and city are wrong

How can i check my setting / about tab? This morning I got an error message say something wasn't safe (not sure what) I think it was my common name whcih is ch4iv.myvzw.com and while looking in there I noticed my state say NJ I live in PA, I did not buy my phone in NJ, the city says Bedminster I have never even been there. Can anyone advise?
Can't I go on my Apple account and get to my setting / details.

Here is the message...

How to set owner-only access file permissions both on Linux and Windows

Hi everybody.
I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
Thank you in advance.

More ideas just came back to me (of something I did before)
Each OS requires a different control.
For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
Then you have to write some native code (access via JNI) to access/modify your authorization.
A more professional solution that I used was J-Integra (other similar tool exist).
Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
In my case it was to read/write/modify Winword documents transfered between PC and server.
From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
Here I must confess my ignorance on Microsoft.
Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

In my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

in my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

Firefox, please update to Firefox 31. [[Update Firefox to the latest version]] 13 is not supported anymore.
After that, [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Hi..
For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
Click the pop up menu to the right of New messages sound to make a selection.

I want to check XI setting in my existing sever

Hi Guru's
I want to check XI setting in my existing sever , as i m new in xi.
I want to know abt SLD , adaptor and alert setting etc
plz help me
Thanks in advance
Edited by: sandeep gautam on Dec 26, 2007 7:47 AM

Hi,
The SLD basically has two main area of content:
1. Software Catalog: From the main screen of SLD,choose software catalog.You can view the installed products or software component
2. System Catalog : You can choose Techinical Landscape for viewing the technical systems & business systems for logical systems.
You can check the SLD connection via SLDCHECK (For example check that business systems can be read correctly from the SLD).
For Adaptors,there are many kinds of adaptors.Which adaptor configuration do you want to know?In case you want to know which adapter engine is available you can
1. Log on to the SLD
2. Navigate to the Technical Landscape area & list the technical systems belonging to XI
3. Check the adapter engine of type XI AdapterFramework.
Alert Framework is basically used with BPM. Many time the alerts are configured as process steps in BPM. You can check the alerts which have been generated via SXMB_MONI in a BPM. Not sure what kind of setting parameter you want to know.
Regards,
Jyotish

How to check whether set up tables are filled or not

Hi Gurus,
How to check whehter set up tables are filled or not?
Cheers,
Reddy.

Hi Reddy.......
And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
1) First u hav to run init with data transfer(After filling the set up table)
2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
Check this.....
Re: question on LBWQ and RSA7
Regards,
Debjani.....

Bypass check for this program only

Hi FI Masters,
i have a zprint prog ex : ZRFFOZA_H2H. i copied this prog and given a transaction(ZRFFOZA_H2H_FI tcode : ZFI_H2H ) and run to see the results where it works fine.
but....
payment method can be linked to only one print program and in this test case payment method M is linked to ZRFFOZA_H2H, so now the problem is that the new transaction code ZFI_H2H is built on program ZRFFOZA_H2H_FI and the system refuses to run.
when i see the message it shows like this...
The list of payment methods (M) may only be processed by other payment medium programs.
now how can i bypass this check for this program only?
can i have some info please....
Thanks,
pasala.

hi FI masters,
to be more clear to the above quetion,
i have 2 zprog for the Payment run
for the Payment method 'M' i have z prog ZRFFOZA_H2H which is configued
again i have made a copy of above prog to ZRFFOZA_H2H_FI and run the payment run for the Payemnt method 'M'.
Now it gives me a message : Payment method(s) are not allowed for this program.
since below copy prog not configed we get this message.
NOW : What can i do to bypass this check for this program only
can i have some info pls?
thanks again,
pasala.

Facebook check-ins set to "Only Me"

Similar Messages

Maybe you are looking for