Facebook is not loading after 3.6 upgrade

Hi there.
After my firefox was automatically upgraded to 3.6, Facebook did not work anymore. Facebook.com loads, but after I log on, nothing happens if I click on anything. If I right click and try and open something in a new tab, the page does not load, just stays blank.
I tried IE and it works fine, no problems. I have also cleared everything in my history, but it does not help.
Please assist as soon as possible.
Thank you!
== URL of affected sites ==
http://www.facebook.com

The same for me. On Windows and on MacOSX. Both with 3.6.7. If I open fb with IE (using IEtab) it works ok.

Similar Messages

Custom Characteristic InfoObject is not loaded after 3.5 upgrade

Hello aLL,
How r u ?
We are having many Custom Created Characteristic IO. In those 2 of them are running into problem everyday for the past 2 weeks. These 2 Master Data Loads makes the other loads to wait.
We try to Cancel the job and let the other loads to complete. After that we tried to reload the InfoPackage (regenereted the DS, checked the data, activated the Transfer Rules).
On clicking START the InfoPackage leads to short dump or it shows the same screen and ends with a timeout.
The Dump shows the following,
ABAP Runtime Errors
Runtime Errors TYPELOAD_NEW_VERSION
Date and Time 04.10.2006 11:17:46
ShrtText
Data type "/BIC/B0000457000" was found in a newer version than required.
What happened?
Runtime error
The current ABAP program, "GP7MG3DD8I300EUTA2VQW0NXU17", had to be terminated because one of the statements could not be executed at runtime.
What can you do?
Try restarting the program.
If the error occurrs several times, consult your SAP administrator.
Choose "Print" to obtain a hard copy of the termination message.
You can use Transaction ST22 to display and manage short dump messages.
It also allows you to retain them beyond their normal deletion date.
Error analysis
The data type "/BIC/B0000457000" was reloaded from the database while the program was running.
However, the system found a version of the type that was newer than the one required.
How to correct the error
Try to restart the program.
Could anyone assist us to proceed further ?!
Best Regards....
Sankar Kumar
+91 98403 47141

Try this,
Create a new infopackaage for the same.
Run once (hope it will run without dump)
Then run once again the older one.
Vijay.

Y50 Not Loading after Windows 10 upgrade

I just ran the Windows 10 upgrade and it said it was installing and it appeared to complete the install and then it began to restart the laptop. Now, my laptop is stuck on the black screen with Lenovo.. It has been stuck here for around 30 minutes now. Is it possibly still loading and I should wait it out or what should I do? Thanks!

Hi Secoda,
Welcome to Lenovo Community Forums!
You can try this step.
Turn OFF the computer Remove the AC adapter and remove the battery
HOLD the power button down for another 15 sec.
Power UP the computer with the AC and Battery and check for any changes.
Let me know if this works for you
Regard
Solid Cruver

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

https://support.mozilla.com/en-US/questions/891839

Angry Birds Friends on Facebook will not load in Firefox, just white screen. Will load using Chrome, etc?

Angry Birds Friends on Facebook will not load in Firefox, just white screen. Will load using Chrome, etc? Checked for malware, cleared cache, re-installed Firefox, disabled add ons, enabled java, updated flash and shockwave, etc.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Facebook is not loading properly in Safari neither in Chrome

Facebook is not loading in Safari, neither in Chrome. 2 days now. Tried resetting Safari, restarting Mac. facebook works fine on my iPhone 5. It was working fine then I logged out of my account. Logged back in after a while and after waiting a long time a very "basic " looking sceen appears where log in details can be entered but Fb is so distorted i cannot see or navigate

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

Aperture 2.1.4 update will not load after Snow Leopard update

Has any one found the fix for aperture 2.1.4 update not loading after the installation of Snow Leopard. I to am also getting the alert "aperture 2.0 or later is required to install the update". I installed my copy of aperture 2.1 using the installer with no problems so the program is in the correct location. I've seen the posts related to this problem and it does not seem a fix has been found.

Just ran into this myself. I did check to see if there was a preference to delete under ~/Library/Preferences and one is not created since 2.1 is never actually launched. 2.1 is sitting in the root of Applications and hasn't been renamed, but the 2.1.4 update just doesn't detect that it is there and just gives the alert "Aperture 2.0 or later is required to install this update."

The webpage does not load after pressing enter or CTRL+ENTER. My OS is Windows 7 Ultimate

I have tried installing the older version Firefox 3.6. After entering the URL on address bar it does not load after pressing enter or CTRL+ENTER

This issue can be caused by an extension (AVG Safe Search can cause this) that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Facebook will not load on my macbook pro

Facebook will not load on my macbook pro in any browser in any location. HELP! This has been going on for 5 months. I cannot take it anymore!

See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
The reason I ask that...
About Safari 5.1.7 and Leopard Security Update 2012-003
Summary
Learn about Safari 5.1.7 and Leopard Security Update 2012-003.
Products Affected
Mac OS X 10.5, Product Security, Safari 5.1 (Mac OS X 10.6), Safari 5.1 (OS X Lion)
Safari 5.1.7 for OS X Lion, Safari 5.1.7 for OS X Snow Leopard, and Leopard Security Update 2012-003 disable out-of-date versions of Adobe Flash Player.
Out-of-date versions of Adobe Flash Player do not include the latest security updates and will be disabled to help keep your Mac secure. If Safari 5.1.7 or Leopard Security Update 2012-003 detects an out-of-date version of Flash Player on your system, you will see a dialog informing you that Flash Player has been disabled. The dialog provides the option to go directly to Adobe's website, where you can download and install an updated version of Flash Player.
Additional Information
If you need to re-enable an out-of-date version of Flash Player, you can do the following:
    1.    Navigate to the /Library/Internet Plug-Ins (Disabled) folder.
    2.    Drag "Flash Player.plugin" into /Library/Internet Plug-Ins.
    3.    If the browser is running, quit and restart it.
http://support.apple.com/kb/HT5271
http://support.apple.com/kb/HT5655

WHY are the GAMES I Play on FACEBOOK now NOT LOADING ??

Why are the GAMES I PLAY on FACEBOOK now not Loading ?
I finally got to the area about STORAGE and got it TURN OFF and went to Play and two so far have NOT LOADED

This is the Acrobat.com forum; if you have troubles with Flash Player, ask in the Flash Player forum. And provide some details!

Iphoto not responding after mountain lion upgrade

iphoto and imovie not working after mountain lion upgrade?

After trying different things with apple help; I ended up re- downloading mountain lion, placing iphoto in the trash and downloading iphoto from app store...iphoto and imovie are working fine now.

The app store will not load after downloading Mountain Lion.

The app store will not load after downloading Mountain Lion. Anyone else having this problem. It works on the the admins acount on the computer but none others. All of the parnetal controls are off and it doesnt work. All i get from the app store is this.

Yes. I have done everything. restarted, made sure there are no funny blocks or no permissions

Facebook is not loading after 3.6 upgrade

Similar Messages

Maybe you are looking for