Facebook Issue 12-20-2012​: Facebook App Returns Error Codes 2001 - 3799

Currently the Facebook application for BlackBerry is experiencing a problem where the application returns an Error Code 2001 through 3799.  This issue is currently being looked into and hopefully a resolution will be found soon.  Until then, here is a bit of information on the issue:
This error is caused by a Facebook server error (API errors) and is not an error on the BlackBerry server side.  
See the following KB for more info:  http://www.blackberry.com/btsc/KB25378
Again, from what I've been told the issue is being worked on.  Right now the workaround is to use WiFi (you may have to turn off the mobile network completely.) For some reason the mobile network connection to FaceBook isn't working as expected.
I will post more details once they become available.
John
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I am having issues on reinstalling facebook application on my bold 9780. It usually shows java.lang.Error. Please I need solution to this challenge.

Similar Messages

  • SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

    Deployment to the client is successful but the error reported within Clients "SCCM Software Center"  
    The software change returned error code 0x87D00324(-2016410844).
    Also States on "Status" Past Due - Will be Retired"
    Can't figure this one out and I did some googling with no success in finding a solution?
    I am running an Adobe Flash install (.EXE)
    Any help or direction would be greatly appreciated
    RF

    Hi,
    Thank you for your response
    ""Wow6432Node is not valid on x86 systems."""
    Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
    When I first created the detection method I had only created the "WoW" Check
    for Flash value in the reg, which was running against both x86 & x64 Win 7
    systems, and forgot to include the x64 check/, either case, the error appeared
    on the WOW check. Presently I have 2 "Detection Clauses" one for x86
    and the second clause is x64 ( non WOW Path), and still receive the same erorrs
    on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
    Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
    located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
    """"Also, why use the default value? I doubt there's anything in there (the default value is the
    value display in a key in regedit with the name of
    "@").""""<o:p></o:p>
    When Default Value is selected the boxes/options below that allow for more detailed
    information to be entered when performing the "reg check"? This is
    where I had been able to enter specific Build/Version to look for, Flash
    11.4.402.265, so that if it does not discover the build # it will proceed with
    the install.....<o:p></o:p>
    I figured having the option to check for Build/Version # would omit SCCM reinstalling on
    systems that have build 11.4.402.265 already?<o:p></o:p>
    From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
    x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
    entries and the true x64 reg entries in both locations when installing.
    Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
    Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success]  all others { / In Progresss / Error /Unknown } has no info......
    If this helps provide further details.....
    Thanks
    Regards,
    Ron
    RF

  • System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

    hi All,
    I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
    system task 'policyevaluator_unlock ' returned error code 0x8000fff
    Kirpal Singh

    Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
    unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
    schedule”.
    BC

  • The software change returned error code 0x87D0128F (-2016406897)

    Hi all,
    We are currently using Admin Studio 2013 to create App-V applications (which in turn uses the Microsoft App-V 5.0 Sequencer running through AAC).  I have noticed that the last few applications that have been sequenced, when deployed via SCCM 2012 have
    the following error:
    The software change returned error code 0x87D0128F (-2016406897)
    Now, we have tested these applications on a vanilla Windows 7 SP1 OS using the AppVLauncher and the application launches as expected.  The issue seems to be with the app deployment.  I have read a couple of articles about this (slim picking) and
    one suggested the shortcut could have an extra space at the start.  This is not the case for my apps.  Also the other suggestion is changing the Enable Scripting registry key, but again this did not work.
    Has anyone else seen this problem and have a solution?
    Ta

    Thanks for replying Torsten,
    This is the error log I get.  Not quite sure how to diagnose the issue:
       + CategoryInfo          : InvalidResult: (:) [Add-AppvClientPackage], Clie 
       ntException
        + FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP 
       owerShell.AddAppvPackage
    ]LOG]!><time="16:16:49.418+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appexcnlib.cpp:441">
    <![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
     -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="16:16:49.419+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:128">
    <![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="16:16:49.420+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:154">
    <![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="16:16:49.421+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvmanage5x.cpp:86">
    <![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="16:16:49.422+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appv5xhandler.cpp:646">
    <![LOG[++++++ App enforcement completed (5 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="16:16:49.427+00"
    date="11-19-2013" component="AppEnforce" context="" type="1" thread="2532" file="appprovider.cpp:2366">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="17:10:13.543+00" date="11-19-2013" component="AppEnforce" context="" type="1" thread="4828" file="appvpackagequery5x.cpp:177">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.192+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.259+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[+++ Starting Install enforcement for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" ApplicationDeliveryType - ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision - 1, ContentPath - C:\WINDOWS\ccmcache\y,
    Execution Context - Any]LOG]!><time="10:46:37.834+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:1643">
    <![LOG[    A user is logged on to the system.]LOG]!><time="10:46:37.916+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2014">
    <![LOG[    Performing detection of app deployment type 00031_SolidWorks_eDrawings_2014_EN_R01(ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, revision 1) for system.]LOG]!><time="10:46:37.927+00"
    date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2079">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:38.236+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2280" file="appvpackagequery5x.cpp:177">
    <![LOG[    Installing App-V 5.X package 00031_SolidWorks_eDrawings_2014_EN_R01 (DTId = ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision = 1)]LOG]!><time="10:46:38.245+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:422">
    <![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer | Remove-AppVPublishingServer
    ] for the  machine]LOG]!><time="10:46:38.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
    <![LOG[    Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer
    | Remove-AppVPublishingServer  with system context]LOG]!><time="10:46:38.247+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
    <![LOG[    Process 4356 terminated with exitcode: 0]LOG]!><time="10:46:43.218+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
    <![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:46:43.219+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvclientconfig5x.cpp:64">
    <![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:43.245+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
    <![LOG[Package: 00031_SolidWorks_eDrawings_2014_EN_R01 with version GUID {7013821C-844B-46E4-B3DB-380B65BF93CF} is not installed. Will install it]LOG]!><time="10:46:43.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500"
    file="appv5xhandler.cpp:459">
    <![LOG[Configure the package 00031_SolidWorks_eDrawings_2014_EN_R01 as download and execute]LOG]!><time="10:46:43.249+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:468">
    <![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path
    'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'  -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] for the  machine]LOG]!><time="10:46:43.255+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
    <![LOG[    Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage
    -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'  -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml' with system context]LOG]!><time="10:46:43.256+00" date="11-20-2013"
    component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
    <![LOG[    Process 4120 terminated with exitcode: 1]LOG]!><time="10:46:45.438+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
    <![LOG[Here is the error message generated by the process:
    Add-AppvClientPackage : XML document could not be loaded because it is 
    invalid. Please supply a valid XML document. Please consult AppV Client Event 
    Log for more details.
    Operation attempted: Configure AppV Package. 
    AppV Error Code: 050009000A. 
    Please consult AppV Client Event Log for more details.
    At line:1 char:106
    + import-module 'C:\Program Files\Microsoft Application 
    Virtualization\Client\Appv ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~
        + CategoryInfo          : InvalidResult: (:) [Add-AppvClientPackage], Clie 
       ntException
        + FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP 
       owerShell.AddAppvPackage
    ]LOG]!><time="10:46:45.442+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appexcnlib.cpp:441">
    <![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';  Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
     -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="10:46:45.443+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:128">
    <![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:46:45.444+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:154">
    <![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:46:45.445+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvmanage5x.cpp:86">
    <![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:46:45.446+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appv5xhandler.cpp:646">
    <![LOG[++++++ App enforcement completed (7 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="10:46:45.450+00"
    date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2366">
    Just to add to this I have also managed to install the application from the downloaded content from SCCM.  By that I mean I go into the cached folder and run the app-v launcher, load and install the application and it works correctly.  Therefore
    it must be something to do with the launch command through SCCM?

  • Failed software update returns error code 0x87D00668

    We are using Secunia CSI to create and publish 3rd party software update packages to SCCM 2012.  I have one client computer running Windows 7 Pro x64 that is having a problem with one update.  When the user tries to install the Adobe Reader update
    in Software Center it fails and returns the following error.
    The software change returned error code 0x87D00668(-2016410008).
    I haven't been able to find any information on this error code.  I was just wondering if anyone else has encountered this error and might have any information on it??

    The item it's referring to in that error would seem to be the task that can't be found. No?
    The issue that needs to be addressed is that the updates aren't needed - they are installed on the server. I've installed the updates manually, rebooted, Software Center should not even be reporting that the updates need to be installed.  And back to
    the second post above, "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed.  The question is then, why is it still "actionable"?
    Thanks
    Why do you think that they are not needed? Have you force CM to scan again for SU? Are they show as being applied in CM12? What does the Windowsupdate.log say about that SU?
    I don't think it is a task that can't be found based on that single line from the log file.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ
    I don't think the updates are needed because they are installed on the server. You will see in my above posts my reasoning for concluding that the updates are installed: "I have two security updates that are indeed installed (according to Windows Update,
    the Windows Update log, and Add/remove programs), yet Software Center shows "failed" and with that exact same error of "Software update still detected as actionable after being applied".
    Yes, I've forced multiple rescans (before and after reinstalling the client) over the course of a few days. Software Center still shows failed.
    The Windows update log shows that it installed successfully. Here's one of lines in the log for one of the updates (in fact as far as the log goes back, 7-3, it's been saying this):
    WindowsUpdate    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows
    XP x86 (KB2729450)
    I think, again, we're back to the fact that is is installed but the issue is: "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed.  The question is why is it still
    "actionable"?  The client sees that it's installed but ... why is it saying it's still "actionable"? 
    I realize that this issue might be a little tougher to track down since I couldn't find ANY other reference to it online.
    Lastly, Config Manager shows "failed to install update" which is exactly what Software Center reports.
    Thanks again, am happy to upload/copy/paste any logs you think would be helpful.

  • The software change returned error code 0x87D00607(-2016410105).

    Hi to everyone. I am learning SCCM 2012 R2 using book Mastering SCCM 2012 R2 in addition to various video trainings and online resources. Currently I am focused on application deployment. I created Foxit Reader application - msi deployment type, distributed
    it to DP and deployed it to device collection containing only one test computer (Win 7 Pro SP1 x64). Having done all these steps I went to client's Software Center and Application Catalog. Foxit Reader app is visible but as soon as I click on Install
    button I receive an error:
    The software change returned error code 0x87D00607(-2016410105).
    I deployed Office 2013 a few days ago (although I am struggling to uninstall it silently) without problems. Meanwhile I did not change anything related to boundaries, boundary groups and DPs. I have only one SCCM 2012 R2 server (Primary stand-alone site).
    I hate these situations when I follow along some official learning material such as this book, doing everything the same as it is done there and it does not work at all.
    Unfortunately I can not afford official MS training, my company does not invest in their system engineers so we are on our own. It is nice to learn something by yourself but situations like this take too much time - probably on official training it would be
    solved immediately.

    Its likely that your problem is being caused by incorrectly configured boundaries with Configuration Manager. There are quite a few blogs on this particular error, as an example:
    http://www.vmadmin.co.uk/microsoft/64-mssystemcenter/350-sccm2012errorboundary87d00607
    and
    http://peerk.blogspot.com.au/2013/01/sccm-2012-app-stuck-at-downloading-0.html
    or
    http://heineborn.com/tech/application-installation-error-0x87d00607/
    Take a look at your boundaries and make sure that you have one configured relative to the location of the Distribution Point that the client is trying to download content from.
    Cheers
    Damon

  • How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

    How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

    Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

  • ::getpeername() returns error code 10057 (on a connected socket)

    Hi, I am blocked on this issue and cannot find a solution by myself. Maybe someone has encountered a similar issue and could provide some hints.
    Calling ::getpeername() (Win 7 x64) on an accepted (and open!) socket connection returns error code 10057 (for code details, please see the code snippet attached):
    "A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied."
    Any ideas why ::getpeername() fails with 10057 although ::getsockopt() says the socket is connected?
    Best regards, M.
    --- sample code snippet - begin - error handling left out for simplicity ---
        //accept call looks like this (call is asynchronous!):
        BOOL res = ::AcceptEx(_listenSocket, _socket, &_addrBuffer[0],0, 16+sizeof(SOCKADDR_STORAGE), 16+sizeof(SOCKADDR_STORAGE), &transfered, (LPOVERLAPPED)&_ov);
        // wait until the (previously accepted) socket is connected:
        INT seconds = 0;
        INT bytes = sizeof(seconds);
        int iResult = 0;
        do
          iResult = ::getsockopt(_socket, SOL_SOCKET, SO_CONNECT_TIME, (char *)&seconds, (PINT)&bytes);
        } while (seconds == -1 && iResult != SOCKET_ERROR);
        // now the socket should be connected, let's call ::getpeername():
        sockaddr remoteAddr = { 0 };
        socklen_t peeraddrlen = sizeof(remoteAddr);
        if (::getpeername(_socket, &remoteAddr, &peeraddrlen) == SOCKET_ERROR)
           int errno = getLastSocketError(); // this errno is 10057
    --- code snippet - end ---

    You also have to set the SO_UPDATE_ACCEPT_CONTEXT  option on the socket before you can use getpeername.  Mike L [MSFT] has provided a
    community addition note (entitled "Does not work on accepted sockets without calling setsockopt() first") to
    the documentation of getpeername to this effect.
    The details of this particular quirk are described in the documentation for AcceptEx.
    [See also GetAcceptExSockaddrs]

  • Secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) PLEASE HELP ME!!

    I have gone to this website almost everyday for years and I have not changed anything in my internet settings, but now I'm getting this message: secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) The only thing I KNOW I did differently, was I installed a CAC reader to my computer, since then, this has been happening. Is there a setting I can change?? E-mail is: [email protected] Thanks! Megan

    There were recently several users getting this error code who use AVAST 2015. If you recently got that program, please see:
    * [https://support.mozilla.org/questions/1029578 Can NOT access https://www.google.com for google voice, mail etc.]
    * [https://support.mozilla.org/questions/1028985 Avast Forum connection failed - works in Chrome etc.]
    * [https://support.mozilla.org/questions/1028190 Since last FF update I can't sign out of Yahoo and when I close FF it tells me it has crashed.]

  • Native SQL - Runtime Error: DBIF_DSQL2_SQL_ERROR (OCI returned error code)

    Hi,
    I have sometimes a problem with a NATIVE SQL-Statement.
    Runtime Error text:
    Database error text........: "OCI returned error code -2."
    Database error code........: "-2"
    Triggering SQL statement...: "FETCH NEXT "
    Internal call code.........: "DBDS/NEW DSQL"
    Sometimes it works and sometimes we have this error.
    Can anyone help me on this error?
    Best Regards
    André

    Hi !
    also a my job that runs every day, gets the same error in the production system at least once a month ! and nobody could help me to find out why.
    Regards
    Graziano Cortese

  • App-v 5.0 Client Package Installation - Error Code: 0C80070003 ( App v Error Code) 74F00F0C80070003 ( Internal error Code )

    Hi,
        I have converted my previous version package which was build upon 4.6, using sequencer to 5.0 app-v client.
    I didn't have any errors & warnings. But, when I tried to install the package , I'm getting the error with error code
    Error Code:
    0C80070003 ( App v Error Code)
    74F00F0C80070003 ( Internal error Code )
    Bala.R

    Hi there, 
    It was my mistake and the way we published app connection groups in the past. In the past we published the applications directly through an connection group without publishing the applications themself. In app-v 5.0 sp3 I needed to publish the packages itself
    also.... 

  • Error compiling FPGA VI: ERROR:Xflow - Program xst returned error code 6.

    When I use the Linear Interpolation function in my FPGA VI i get the compilation error:
    ERROR:Xflow - Program xst returned error code 6. Aborting flow execution...
    the Compile Server also gives the more detailed information:
    ERROR:Xst:1749 - "C:/NIFPGA85/srvrTmp/LOCALH~1/TRAPCO~2/NiLvFxpFloor.vhd" line 68: error: The output for the floor function should not have any fractional bits.
    I'll be happy for any suggestions how to solve this.

    Hello!
    Could you compile a program with only the Linear Interpolation.vi and only some constants and indicator as input and output?
    I tried on my PC and compile a simple VI containing only the Linear Interpolation.vi
    Which Version of NI-RIO do you use?
    Do you also placed the FPGA VI in library? If yes put out all FPGA VIs from the library and check that they aren't reentrant.
    This could cause problems to the compiling of FPGA VI.
    Try to create a new project with only a VI with the linear interpolation and check if it is compiled.
    Best regards
    Ken

  • What is CR returned error code / status when hit max concurrent access ?

    Hi,
    Do anyone knows what is the returned error code or status return from crystal report object when it hits its max concurrent access license?
    I'm developing on VS 2005 With crystal report, which comes along with it. If i'm not wrong its CR 9. Correct me if I got e versioning wrong. =)
    Thanks in advance!!

    Hi,
    Do anyone knows what is the returned error code or status return from crystal report object when it hits its max concurrent access license?
    I'm developing on VS 2005 With crystal report, which comes along with it. If i'm not wrong its CR 9. Correct me if I got e versioning wrong. =)
    Thanks in advance!!

  • HT1338 I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    The App Store is not available in Iran.

  • Fpga -Re:ERROR MESSAGE INDICATIN X-FLOW PROGRAM MAP RETURNED ERROR CODE

    sir,
    I am working on a project using ni rio-7831R uaing labview fpga1.1, on compiling on to the device i am encountering a error giving follow message:
    Problem encountered during the packing phase.
    ERROR:Xflow - Program map returned error code 2. Aborting flow execution...
    so please, recommend me the action so that i could compile my project without error.
    vamsi

    Hi Vamsi,
    The information you are looking for is in this KB: Why Does My FPGA Compile Give An OVERMAPPED Error When Compiling? < http://digital.ni.com/public.nsf/websearch/060BA89​FE3A0119E48256E850048FFFE?OpenDocument >
    I think you are running out of space on your FPGA. You can either purchase a 3 million gate fpga(7833R) or Optimize your code to use less space. Have a great day!
    Regards,
    Prashanth

Maybe you are looking for

  • Problems with malloc in C++

    Dear Experts I am facing a strange core dump in a malloc() call. This function is gettnig called numerous times per second and from the debugs I found that it's allocating a memory pointer which was just deallocated by free(). This is happening very

  • Screen does not open

    The Touchsmart boots up with no beeps, but the screen is still black with no indencation of being on. This is a new pc with nothing loaded on except what was installed from the manufactor.

  • ACS view DB size has exceeded allowed quota

    Hi: We have an CSACS-1121-K9 with ACS version  5.4.0.46.3. We see the following warning "ACS view DB size has exceeded allowed quota"  . I can't find the meaning of this , how critical it is, or what should be done. Anyone have an answer. The ACS has

  • I have no options under my privacy tab and would like to be able to clear the cookies to make my games work better.

    When I go under options I can select all of the options except the privacy tab. It doesn't open. Whichever tab I looked at previously is still there. Nothing about cookies.

  • Dedicated power supply for multiple GPUs...

    Greetings, I hoped and dreamed in running dual 5870s, but sadly you only run one 5870. I found this FSP Group Booster X5 450W Dedicated power supply in hopes to run dual 5870s (here is the link: http://www.newegg.com/Product/Product.aspx?Item=N82E168