Facebook log in button automatically pressed so cant log out

my freind has used my new come to go on facebook and now i tried to log her out and it keeps logging her in and now i cant access my profile

Hi
May i get to know which Browser are you using Internet Explorer, Firefox Or Google Chorme please let me know i can let you know what needs to be done.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?
When I press the home page the screen activates but stays black. I have to press the side button to turn if off then may have to repeat several times to get my phone to come on. Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it. I have to use the close button to make it go away.

If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem. Get your Home button fixed.

Disable page display when back button is pressed after logout

hi,
I dont want the old pages to appear once the back button is pressed after loggin g out. That is .... when logged in, if the user presses back button then his previous pages must be shown....but once the user logs out and then if he presses back button then some message like session has been closed....like message should be displayed.
Hope you understood the problem

If you expire a page then back button will not take it to the previous page.
expire is a HTTP-EQUIV meta tag in the header of the page. You can set the content to some time in the "past" when serving the page first time.
Expires
This tells the browser the date and time when the document will be considered "expired." If a user is using Netscape Navigator,
a request for a document whose time has "expired" will initiate a new network request for the document.
An illegal Expires date such as "0" is interpreted by the browser as "immediately." Dates must be in the RFC850 format, (GMT format):
<META HTTP-EQUIV="expires" CONTENT="Wed, 26 Feb 1997 08:21:57 GMT"> Hope this works for you, there are browser dependencies as well.
vr,
Sudhakar B.

Change the state of button when another button is pressed

Hi all,
I have a pretty straightforward question but just cant figure out how I can achieve it...I am trying to switch between two types of waveforms (sine and square) on a graph using buttons and a case structure.
I currently have two buttons A and B. When I press A, it turns true and displays waveform 1. When I press B, B turns true and displays waveform 2. However when B is true, I have A still enabled as true (pressed)
I cant figure out how to change the state of A back to false when B is pressed and vice versa.
I am fairly new at Labview so if someone can refer to a post where its this is already answered or point to the right direction, that would be appreciated
Thanks
Solved!
Go to Solution.
Attachments:
Waveform.vi ‏94 KB

Instead of cluttering the code with event cases (!), hidden controls(!), value properties(!) and local variables(!) (as suggested above but not recommended at all!! Besides, it does not even work correctly!), all you need is a radiobutton control that also allows "no selection". See attached (LabVIEW 2013). You could also add a third boolean for the sine wave and disallow "no selection" to make the code even more self-documenting.
I made the radiobutton container transparent to match your existing style.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Waveform_MODCA.vi ‏94 KB
Waveforms.png ‏11 KB

Automatically press a button

hey
Im using jdeveloper 11.2.3
Im trying to display a graph
the graph must be based on a table
the table is based on a web service
The only thing makes sense is crating a form- making it somehow invisable and a creating button should be automatically pressid when loading the page
Does anyone know how do I automatically press on button?
(on btw- how to make a form invisible?)
Im a begginer.

Hold on, before going forward in htis direction...
Why do you use a hidden button for this? Bounded task flows can have a method from a bean as start activity. In this start activity you do whatever you have to setup the data you want to show.
No queuing of an action to a hidden button. This is not a best practice as it is not maintainable.
Timo
P.S.: To bind the button to your bean you open the property inspector of the button in the page, go to the 'Advanced' node and click the small arrow down on the right hand side of the 'Binding' property. Here you specify the bean and the property name. Then in the bean you
RichButton btnSubmitForm; // this is generated when you add the property from the inspector together with getter and setter method
ActionEvent event = new ActionEvent(btnSubmitForm);
event.queue();But you still should be using a bounded task flow with a method activity as a start activity.

Can't See Facebook "Log In" Button

When using Safri to access Facebook there is not "Log In" button displayed and therefore I can't log in. When I use Chrome everything is normal. I have cleared my cache and rebooted but nothing seems to help. Any thoughts?

Have you tested with safari - Preferences - Extensions set to Off ?

Power button is pressing itself automatically.

5S Power button is pressing itself automatically, sometimes it appears Slide to Power off button.
Nothing pressed and touched. Phone is pressing itself.
Please help mee!!!!!!!!!!!!!!!!!!!!!!!!

is there anyone who can help?
Apple experts?

Macbook pro will power up but cant log on any user. Buttons on keynoard work but nothing responds to curser.

Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

Have you reset the SMC?
http://support.apple.com/kb/ht3964

I forgot my icloud id and I used it to make a facebook now cant log into it ?

I forgot my icloud id and I used it to make a facebook now I cant log into it how do I find out what it is ?

Read here: http://support.apple.com/kb/HT5625.

Cant log out of facebook on my hp touchsmart

I downloaded the facebook app and then logged in using my daughters facebook. Now I cant log out of facebook on my HP desktop Touchsmart. Anyone know how to do this?

Hello V85,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues logging off Facebook. I am providing you with a link to a Facebook Support document: How do I log out of Facebook?, which should help you in getting logged out.
Just so you know you are not the only one with this issue I am including a link to a Time Magazine post titled Thief Arrested Because He Forgot to Log Off Facebook After Burglarizing a Home, whom you have one up on as at least you are remembering to log out.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My ipod touch automatically presses the home button

my ipod touch automatically presses the home button causing apps to close, appswitching tray to pull up, and turning to spotlight search. i dont think my home button is broken; i can press and release it no problem. could this be a software problem?
thanks!

I would try the standard fixes inorder:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears
- Restore the iPod via iTunes on your computer. First from backup and if problem persists restore to factory defaults/new iPod.

How to hide parameters AUTOMATICLY based on radio buttons being pressed

I have multiple radio buttons and with each radio button I have parameters that appear on screen for user to enter data.   Is there a way to make the selection blocks appear and disappear automatily based on the user pressing the radio button?
My current coed works only if I press the enter key but not automatily when the radio button is pressed.

hi, have a look this example, it works as u want.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: r_ps TYPE c RADIOBUTTON GROUP rd DEFAULT 'X' USER-COMMAND abcd, "radio button server
               r_as TYPE c RADIOBUTTON GROUP rd . "radio button for application server
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_pfile TYPE rlgrap-filename MODIF ID ccc, "presentation server input file
                p_afile TYPE rlgrap-filename MODIF ID aaa. "application server input file
SELECTION-SCREEN END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
IF r_ps = 'X' .
    LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ELSE.
    IF r_as = 'X'.
      LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
    ENDIF.
ENDIF.
START-OF-SELECTION.
Regards

I need to "reboot" my iMac. Cant log in, profile account file(s) problably missing

I was deleting some applications etc. on my iMac when the screen suddenly toned down
and a message said that i had to restart the computer (by holding the power-button).
After that I cant log onto my account. This message pops up;
"You are unable to log in to the FileVault user account "daniel" at this time.
Logging in to the account failed because an error occurred"
So I guess that I must have managed to delete some file that belonged to the "daniel profile".
This is mainly a problem since this is the only account on the computer with no Guest-
account activated either. Since their is no option to create a new account at the start-up
dashboard... well.. you see my problem.
So what I have done so far is to try a Safe Boot. The support page here on this site said
that this will include a automatic disc check and repair.. However Im not sure if that
worked at all because i still had to (try) to log onto the Daniel profile which didnt work.
And no difference was made after restarting again.
I have no Mac OS X Install Disc avaliable at the moment, hopefully its still around somewhere.
Since i didnt live where I live now when i got the iMac its problably in my former home
(parents).. Not an option right at this very moment.
So instead i am now moving on to the Single User Mode and Fsck. I write the
whole /sbin/fsck -fy and i do get a FILE SYSTEM WAS MODIFIED message (one time),
even goes for some more rounds just in case.
I reboot but the problem is still there.
So instead i tried to create another user through the Fsck with
rm /var/db/.AppleSetupDone
Which take me to the initial set-up screen however i can now not pass the
screen where you choose language (i click a language and the screen goes black
for a sec and then it turns back to the language screen again)
So i do "rm /var/db/.applesetupdone" and is now back to where i started..
Im thinking that maybe deleting the user ("rm - R /users/username") would
be something that might work.. but then again i dont know..
Also im starting to think that some of the problem is in that i changed the account username
it says "Namn" at the login screen but as i wrote "Namn" cant be find in the system,
but the old one "(Daniel") does.
... Any ideas? Is there anything I can do? Will the CD work? If i dont find the CD can i get another one?
Does your average computer store has knowledge about things like these?

Apple Store should be able to help, I doubt just any computer store will know how.
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
If account was renamed that won't be good at all.
Do you have a Backup?

Installed a neiman survey app today and since i did that i cant log into my acc, everytime i get past my password immediatly it says switch on and off again, i cant get any further ??? help

i can get past my password then the arrow freezes and a black box pops up saying switch off by the main power button and back on again?? i did this for exactly the same thing to happen???
i can log into guest acc but obviously cant uninstall a app from therer and now i just dont know what to do??
help please ???

What is a Neiman survey?
Mountain Lion has a recovery partition - boot into it by starting while pressing Command-R. Read the article for further options.

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Facebook log in button automatically pressed so cant log out

Similar Messages

Maybe you are looking for