Facebook problems after ICS update on Neo V

Hi,
I have a weird problem since updating, where  the facebook app only works when connected to WiFi.  I still get notifications , which I assume comes from the facebook in Experia , but when I open the app it thinks i've lost my connection.  All other apps seem to work.  Last night I installed an alternative facebook client (Seesmic) and it has the same issue.
I'm thinking its some kind of port issue, but I'm a bit stumped as to how I can resolve it.
Has anyone else had this problem ?
Thanks.
Leigh.

I am wondering if you have a WAP access point installed instead of the Internet APN. You can check this by going to:
Main menu > Settings > Wireless & Networks > Mobile Networks > Access Point Names > You may need to check with your current network provider to confirm if what you have selected is WAP or Internet.
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Problems after ICS update.

    I had a lot of issues after the ICS update.  After a couple of days I finally removed the battery for 1/2 an hour when I replaced it seems to have taken care of all but one issue.  When talking on the phone the conversations from the other end breaks up constantly. Has anyone had the same problem?

    I've heard of people having various problems, but haven't heard that one.

  • Livedock problem after ICS Update

    Hi
    My Livedock stopped working after the ICS Update (via PC Companion).
    I tried uninstalling the app update so I could reinstall it again and see if this fixed the problem however I now get the following error when trying to update livedock to the latest version:
    "Package file was not signed correctly. Uninstall the previous version of the app and try again."
    Any ideas?

    Try to reinstall the phone software via PC Companion.
    http://www.sonymobile.com/gb/tools/pc-companion/
    Let me know if problem still remains after software repair.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Droid RazrMaxx battery problems after ICS update

    I purchased a RazrMaxx in June and updated it to ICS on June 29. Since the ICS update the battery life on the phone went downhill. After a 100% charge and having the phone on standby for the last 14hrs 15min, I have only 30% battery life. I reset the phone twice to factory specs, it did not help. Screen brightness is set to about 30%,battery savings mode is on. Does anybody have any suggestions. Thanks

    Wipe Cache first, if that doesn't bring joy, FDR but do not let google restore apps/data - set them up manually(PITA, I know)
    For info on how to do either:https://community.verizonwireless.com/thread/777870

  • Issues after ICS Update to Neo V

    1. Performance lag is there although I have removed many apps and Internal memory as well as RAM available is more than what it was earlier. Any suggestions?
    2. Apps crash. The most worrysome is the scenario when you are not able to receive a call because concerned app is crashed. After that no trace of call so you can not even call back. This has happened couple of times after update on 25th April.
    3. Today morning I used camera with smile detection on. Camera kept clicking pictures after detecting the smiles. Auto click was off. Any one else faced this problem?
    4. In ICS, you can not do screen capture by pressing power button? I read some where to use Power button & volume down button simultaneously. However it some times works, most of the time does not. Any suggestion.
    Madan Mohan
    Solved!
    Go to Solution.

    1) it is suggested to format SD card and reinstall your phone's software again using PCC or SUS
    2) Same as above
    3) if you will set it to smile detection, obviously it will click pics when you will smile ( again and again)
    4) same as 1 and 2, just take care to press at the same time ( exact) and hold them there unitil you take a shot
    Conclusion :  Please format your sd card and reinstall your phone's software using pcc.
    Your experience may change
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Facebook problem after lollipop update

    Last night ı ve upgraded my phone up to lollipop. Now i can't refresh the home page of facebook. I can see my own profile ı can see the messages but I can't see or refresh the home page (news feed). I returned my phone to the factory settings and reset all data. At first it was working after a few hours it turns into same problem again. Please help.

    Hi,
    I think there might be something wrong with the latest update for Facebook by the look of the reviews for the application:
    https://play.google.com/store/apps/details?id=com.facebook.katana
    I can see several comments that people experience this issue. After the factory reset, did you update the Facebook application? 
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Anoying facebook problem after OS updates

    ive updated the OS 3 times now since ive had this phone and the last being 10.2.1.2977 which was 17mb released a couple of days ago.
    problem is every time ive updated the OS every single message and notification since i bought the phone has returned onto the phone for facebook. last time i deleted them again there was almost 8000 to delete and this took forever as the only way i could find to delete them was one by one and scrolling down. if i highlithted more than 50 at a time they just did not delete at all.
    someone please tell me there is an easier way of deleting them all as i guess there will be over 9000 now.
    Solved!
    Go to Solution.

    I don't have Facebook, but normally, when you are in the hub, choose Facebook, so you only see Facebook messages in the hub.
    Then tap and hold a date and select "Delete Prior". It should delete everything prior to that date.
    Blackberry Engineering in Switzerland - Dexion Services AG

  • Wireless router connection problems after ICS update

    Good Morning (sort of)
    I just got ICS on my Thunderbolt and now the wifi connection cycle between "save", "obtaining ip address" and "connected".
    It will not stay connected. I've forgotten the connection and reestablished it to no avail. The connection is WEP to support
    a couple of old devices.
    Any help would be greatly appreciated - I have a home server that I now can no longer connect to because it's on the LAN side
    of the router and my phone is not.

    I've been having the same problems keeping a wifi connection (both at home and work) since I upgraded to ICS as well. I just tried the "forget" (as suggested in this post) here at work and it seems to be working better now--connected for about 30mins now. I'll have to try this when I get home tonight. Thanks!

  • WIFI problem in NEO V after ics update (India).

    Dear Sir/Madam,
    I installed ICS update in neo v and after that I am suffering lots of problem in connecting WI-Fi it disconnect itself ,please help me regarding this, same i tried in other neo v in old 2.3 (Gingerbread) n its working properly in that same router.......Please solve this problem as soon as possible....

    Hi, I'm sorry to hear you are having problems. Have you tried resetting the phone since the update to see if this helps at all?
    What do you think about this forum? Let us know by doing this short survey

  • Multiple Samsung Stratosphere problems after FF1 update

    There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update.  Some were replys to older posts and some only touched on a single issue.  I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
    For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
    Summary:  Verizon and Samsung have finally updated the Stratosphere almost 1 year after release.  This updated the phone from Android 2.3.5 to Android 2.3.6.  Going by filename, this is known as the FF1 update.   This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
    There were some noticable changes in this update:
    -Lock screen has changed.  The puzzle piece and glass lock options have been removed.  New options have been added, such as facial recognition unlock.
    -Call answering screen has changed, introducing the option to ignore call with a message.
    -Camera now has digital zoom ability.
    -Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
    -Phone icon has changed ever so slightly
    -Wifi icon now included up and down arrows to indicate data is being sent or recieved
    -Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
    -The visual voicemail app has been improved (I have personally not used this feature)
    -Callback number is now supported in text / picture messages
    -Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
    -Update to how the device deals with the end of scrolling.  It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll.  (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
    -(I am sure there are more.  please list any others you may have noticed)
    I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
    -The biggest problem is with wifi connectivity.  Upon an initial connection to wifi, everything works great.  After somewhere between 15minutes and 2 hours, problems start happening.  Its as if the wifi keeps hanging or reconnecting.  Download speeds (tested with the SpeedTest.com app) slow to about one third of normal.  Apps like Facebook that require a constant connection will just time out.
    -It appears the signal strength for 3g and 4g connections is lower.  There are places where I used to get a 4g connection, and now I only get 3g.  Some palces I fall back to just 2g digital.
    Another minor issue i found was with text messages.  When you reply to a message, it no longer automatically focuses the text in the input box.  You have to first click into the box to start typing.  Not a huge deal, but one more step to take over and over.  Minor annoyence.
    At my house, I struggle to get a 3g or 4g signal.  I depend on wifi for my data connection.  So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home.  Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
    -Complete factory reset on my phone.  (did not help)
    -Pull battery and SIM card out of phone for 15 minutes.  (did not help)
    -Went to a Verizon store.  The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update.  He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
    -I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP.  Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address.  Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this.  I have a NetGear N900 router, and I can not change teh DHCP lease time.  It appears, however, that my router is not sending out "forever" leases.  But just to make sure, I gave my phone a static IP.  (None of these steps made any difference).
    The only thing that temporarily fixes the problem is a reboot of the phone.  This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
    I have now had this update for over a week, and on 2 phones.  I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
    I am asking Verizon or Samsung to at least confirm this issue if possible.  Maybe there are newer revs of the Stratopshere hardware that don't have this problem.  Or there is something unique about my (and apparently others) situation.  But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
    I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
    I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
    Thank you for your time.

    Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
    I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
    UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
    One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
    Message was updated by David Rensberger

  • No audio after ICS update.

    After ICS update, have lost audio playback. In settings, speaker has single line crossing thru it showing audio is muted. Can not unmute audio. Same for audio 'alerts'. Have rebooted and pulled battery to no avail. Ideas?

    I also have the same problem with the sound going in an out and lines through the speaker/notification etc. I called tech support and they actually told me to come on this forum and look for solutions, because the update has problems. I certainly didn't really understand that message...45 minutes waiting on hold to tell me to check the boards. Oh well. Any answers let us all know. :-)

  • Xperia arc S LT18i - contact issues after ICS update

    I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

    Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Major problems after ICS on my Bionic

    So I've had the Bionic since it was released and have never had any major problems with it.  It wasn't until a few days ago when I woke up to a notice of the ICS update finally being available, so of course I pressed on Install now.  I ended up going to sleep again and waking up later to a frozen screen.  I did a battery pull since it was just frozen on the unlock screen, and after it booted up I was having issues with everything.  Half of my icons were gone, neither of my text messaging apps worked and would force close randomly.  I kept getting random reboots while just staring at my phone, sometimes many times in a row.
    I ended up taking it to a couple different Verizon stores, the people at the first one told me they haven't heard of this problem nor did they know ICS was even out for Bionic yet, the second store was like "all you can do is FDR".  After being hesitant on doing that since I didn't want to lose anything, I finally did it.  After the restore, it hung on the "preparing system" screen for at least 2 hours before I finally did a forced restart.  After that it decided to continue with everything...things were going okay for a little while, until I started to reinstall my apps.  Then I started getting random reboots again, force closes on programs, and horrible battery life.  I decided to give it a couple days to maybe settle in, and well, I thought it was better, but last night I started getting random reboots again and force closes on a lot of apps. 
    This is getting extremely irritating as I cannot use my phone much in fear of it crashing or rebooting itself.  In the time it took me to type this, it has restarted 2-3 times, which is why I'm glad I have a laptop instead of having to type this on my phone. 
    Is there anything I can do to fix this? Or should I request a replacement phone?  I have not rooted nor installed anything that changes system settings, and these problems only started after the ICS update, so it is not anything I did to my phone.

    I've got the same problem after the update 3 days ago. The homescreen keeps closing and reloading - that takes >10 seconds every time. This update made my phone unusable. I can't get to anything because the interface keeps rebooting. I tried restarting it, taking the battery out and factory reset. Nothing helped - it works fine for about 5 minutes and starts messing up again. I can't even answer a call on it because it just freezes when I use any interface features. OMG... Motorola never again!!!
    I'm taking it to the store lets see what I can get out of them. Who is testing these updates? Monkeys? That's what causes people to switch to iphones.

  • After ICS update, stock email not syncing for exchange 2010 activesync.

    After ICS update, stock email not syncing for exchange 2010 activesync.
    My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
    Has any patch been released or explicit instructions have been provided ?
    First sync:
    5/3/2012 7:47 PM
    Last successful sync:
    Not Available
    Folders synced:
    0
    Device name:
    Not Available
    Device model:
    MT11i
    Phone number:
    Not Available
    Mobile network:
    Not Available
    Device type:
    Android
    Device ID:
    xxxxxxxxxxxxxxxxxxx
    Device IMEI:
    Not Available
    Device OS:
    Android 4.0.3
    Device language:
    Not Available
    User agent:
    Android/4.0.3-EAS-1.3
    Access state:
    Access Granted
    Access set by:
    Global Permissions
    Policy applied:
    Active Sync Policy - Partially applied
    Policy updated:
    5/5/2012 8:11 AM
    ActiveSync version:
    14.1
    Also at http://talk.sonymobile.com/message/184221
    Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?

    Hopefully my reply to this can help.
    http://talk.sonymobile.com/message/190149#190149
    And please try to keep same problem in same thread.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • BMW pairs with RAZR, but no contacts after ICS update

    One of many problems since ICS update:
    BMW pairs with RAZR via bluetooth, but cannot access contact list on phone.  I can manually dial and connect phone calls through car.
    Dialog box on Phone asks to access BMW, I press OK, same dialog box appears...repeat ad infinitum.
    I have deleted phone pairing, re-paired, soft reboot, re-paired...still no contact list appears on car's communications screen.
    Had no problem with car/ phone pairing prior to ICS update.
    Any suggestions?

    Jim Have a Look at this Links and Maybe it can Help you get you Bluetooth Going: b33
    https://forums.motorola.com/posts/ed7efd7b48
    https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/72007/p/30,6720,8112
    How do I setup and use Bluetooth?
    Your phone can connect to other devices wirelessly, using Stereo Bluetooth® technology Class 2, v4.0 LE + EDR  technology with several Bluetooth® Profiles.
    Quick links
    Instructions for Android 4.X (Ice Cream Sandwich) users
    Turn on and connect to a Bluetooth device  
    Reconnect devices
    Disconnect devices  
    Changing the phone name  
    Supported Bluetooth Profiles
    MotoSpeak FAQs and information   
    Turn on and connect to a Bluetooth device
    To turn on and connect a Bluetooth hands-free headset(s), car kit(s), or other Bluetooth devices:
    On the Home screen, press the Menu key
    Tap Settings
    Tap Wireless & networks
    Touch Bluetooth to turn it On
    Touch Bluetooth settings
    Touch Scan for devices (make sure your device is in pairing mode)
    Your phone scans for available Bluetooth devices
    Touch the Bluetooth device to select it
    Type the PIN if needed (PIN is usually 0000 or 1234)
    Touch the device name again to connect to it. (If it doesn't automatically)
    Tip: If your device is not connecting to the Bluetooth accessory, it is recommended that you try to reset the Bluetooth device. Check your accessory user guide for reset details.
    Reconnect devices
    In order to automatically reconnect your phone with a paired device, simply turn on the device.To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.
    Disconnect devices
    In order to automatically disconnect your phone from a paired device, simply turn off the device.
    To manually disconnect your phone from a paired device, touch the device name in the devices list, then press Menu> Disconnect.
    Changing the phone nameThe phone name identifies your phone in a Bluetooth network. Default name is usually "Motorola Phone"
    Make sure that you have turned Bluetooth on (See steps above)
    On the Wireless & networks settings screen, touch Bluetooth settings > Device name
    Enter the name for your phone in the dialog box, then touch OK
    Supported Bluetooth ProfilesYour Motorola DROID RAZR uses Stereo Bluetooth® technology Class 2, v4.0 LE + EDR.The following Bluetooth profiles are supported:
    A2DP,
    AVRCP,
    BIP,
    BPP,
    DUN,
    FTP,
    GAP,
    GAVDP,
    GOEP,
    HFP,
    HID,
    HSP,
    OPP,
    PAN,
    PBAP,
    SPP
    For Android 4.X (Ice Cream Sandwich) users.TURN BLUETOOTH POWER ON OR OFF
    Touch Menu  > System settings, then touch the Bluetooth power switch to turn it  or .Note: To extend battery life, turn off Bluetooth power when not in use.CONNECT NEW BLUETOOTH DEVICES
    Note: This feature requires an optional accessory.To connect with a new Bluetooth headset or other device, you need to pair with it. You only need to do this once for each device-to connect again, just turn on the device.
    Make sure the Bluetooth device you are pairing with is in discoverable mode.Note: Refer to the guide that came with the Bluetooth device for details.
    Touch Menu  > System settings > Bluetooth.
    Touch the Bluetooth power switch to turn it  and scan. If Bluetooth power is already on, touchSEARCH FOR DEVICES.
    Touch a device to connect.
    If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth connected indicator  appears in the status bar.
    Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.
    RECONNECT DEVICES
    To automatically reconnect your smartphone with a paired device, simply turn on the device.
    To manually reconnect your smartphone with a paired device, touch the device name in the AVAILABLE DEVICES list.
    DISCONNECT DEVICES
    To automatically disconnect your smartphone from a paired device, simply turn off the device.
    To manually disconnect your smartphone from a paired device, touch the device name in the devices list, then touchOK.
    CHANGE DEVICE NAME
    Touch Menu  > System settings > Bluetooth, turn Bluetooth power on, then touch Menu  > Rename phone. Enter a name and touch OK.

Maybe you are looking for

  • How to see the timeline when animating

    My timeline does not appear regardless of what I do. How come?

  • Printer icon in dock trouble

    Every time I print the printer shows up on my dock and when the document is done it won't go away. Before I upgraded to leopard it would go away but now it doesn't. Is there any way to fix this?? I have a Canon Pixma mp600.

  • JoinFieldValue on Service Request

    Hi, After created my SR, if I click on new task in the related information, then I would like to have defaulted the type of the SR in a task field. I would like to know if JoinFieldValue can be use on service request because I didn't succeed to do it

  • Third party sales scenario for Service.

    Dear Friends,                 Is it possible to create third party sales scenario for Service. If it is possible Please up date me the configuration process. Regards, Bhanu

  • Dynamic application with ADF

    Lets say, that we have a very standardized application building. So much standardized, that all of the application rules and definitions could be kept in some database tables. Application would then be generated on-line (ex. when the servlet containe