Facebook pull-downs don't work and the messages area is blank under the blue navigation bar.

I recently let my computer upgrade my Firefox from 16.0.1 to 16.0.2. Once I did, every single page I went to loaded but came up completely blank. I tried Firefox's suggestions on fixing it and nothing worked so I went back to 15 and then upgraded to my previously working version, 16.0.1. I've only had one problem since. My pull-downs on Facebook don't work, the messages page comes up blank, and lots of other little things don't work either, like comments on certain pages or the "endless page loading" on my friends pages (I can only see the top few updates, the rest doesn't load.) It works fine on Chrome, but I hate losing all my plugins to go to Chrome from Firefox when only one site doesn't work. Since then I've turned off all my add-ons, deleted my history, removed my cache and cookies, utterly removed Firefox and reinstalled from scratch again, after deleting EVERY item on my hard drive with the word Mozilla attached. I've updated my Flash, my Java, my QuickTime, my Direct X and my Adobe reader plug in. I've tried to roll back my system, but I've been working on this too long and it won't go back far enough. I've run the windows malware scanner (full scan) and Malwarebytes scanner as well (full scan), with no problems found. I'm out of suggestions. What can I do to get my Facebook to work again on Firefox 16.0.1? I'm on Windows 7 (64) Home Edition, BTW.
HELP!!

That did it!
Your kung fu is better than mine and I am massively grateful to you. Everyone else had given up on helping me or never even started . Thank you VERY much!!
EDIT: NOOOO!!! I have no idea what's wrong. It started doing it again, and now when I delete everything in that folder for personal stuff, even when I JUST deleted it all and haven't added ANYTHING, it still is broken! I'm so sad! We almost had it!!
Why would it work the first time and then not work the second time? I bring up the personal settings folder, delete everything in it, restart, go to facebook, and then it still doesn't work!
EDIT: I figured it out. I like to have firefox remember some cookies and not others. Most are deleted on restart except a few key sites. When I change that setting to on, facebook java stuff stops working. Even if I let facebook be one of the few that I always keep the cookies for on restart, it still won't let me use it. I either need to have it remember all cookies or forget all cookies on restart. And I hate tracking, so if I have to choose between firefox remembering everything and remembering nothing, I'll take nothing. It's probably good for me to remember all my passwords anyways. Annoyed that facebook won't let me use that setting, though.
So solved!

Similar Messages

My eBay pages don't work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more. I can't list an item as the submit button has disappeared. It all works fine on IE.

My eBay pages don’t work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more.
I can’t list an item, as the submit button has disappeared.
It all works fine on IE. I’ve uninstalled and reinstalled Firefox, but still the same.
How can I regain my missing bits please.
Thanks

Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
See http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Drill/Down don't work and Characteristic is deleted after filter in BEx Ana

Hi All, please help me experts
I have 2 issue:
1.- When I execute a Query in BEx Analyzer I got the first result, I can add other characteristics just to click on this.. or with context menu.. but later If I try to move de order of columns in the report the function for drill down doesn't work. Then, I need to click on Design mode and then click off design mode... and the function for drill and down is actived, then only I can click on the characteristics and move to other column into the report. Please if you can tell how can I activate this functionality without need to move to design mode..
2.- When one characteristics is filter in to the report, example select some values for this characteristics and click on execute, I get the result but this characteristics dissapear form the report.
Please help me I will assign points for the answers.
Alice

1. You will find this option beside ? in Add-Ins. In that Settings --> BW Server Connection.
+ Not I didn't find... for example I saw... File.. Edit...view.. Insert... and others exactly like when you enter in excel ... the only difference it's that I saw activated the tool bar for bex analyzer.. on where I saw .. design mode... refresh..etc.+
2. If you select the field in Free characteristics and restrict it with a variable in query designer mode, you will get that characteristic in variable screen and you can give the selection and you will not get that charcteristic in the output as you have taken that in free characteristic. Only if you do drilldown accross rows for that characteristic, then it will appear.
If you take that into Rows in query designer mode, then you will get the same for variable selection and as well as in the output without drilldown accross rows. It will be displayed automatically.
+The clear example is: I have one free characteristic in report, like 0MATERIAL, this characteristics didn't have any restric value... then the user add 0MATERIAL into report just for see more details... later if the user filter 0MATERIAL with some values and click ok, the column 0MATERIAL dissapear from the report +
did you have another idea to solve this?¡
Thank you a lot.
alice

User can see the subject are but nothing under the subject area.

Hi
I have OBIEE 11g.
I was thinking this is a very simple case where I have one subject area for which I want to create a user such that it can create analysis and reports on that subject area.
I BIAdmin can do that currently.
So I created a new user in console. Under the 'Groups' tab of this user, I choose 'BIAuthors' from the 'Parents Group Available'.
Then I logged in as this user. User was able to see the subject area but only the header. When it clicks on the expand ( + icon in tree) it expands to nothing.
So i logged into the rpd and Under Identity -Manage , and open the properties for BIAuthor. and under Permissions , I gave BIAuthor the permission to the subject area.
That did not help.
I also opened the subject area from the presentation layer and under permission I made sure that "Everone" has Read access.
But even after a bounce the user just sees the header and it expands to nothing,
Any suggestion.
(I was also thinking that why do I see BIAuthors in weblogic where as BIAuthor in rpd (without s ). I was thinking the rpd BIAuthor is something from 10g version.
Thanks for all the help.
Edited by: user6287828 on Sep 13, 2012 2:33 PM

Hi,
Better to decline the subfolder permissions from the user @answers,then user can only see the subject area but he can't access the subfolders...
mark if helpful/correct...
thanks,
prassu

Why is the message are for my emails blank

when i open an email, the message area is blank. i can read it when i click on the reply button. my sister accessed my email account using internet explorer. how can i that changed back to firefox.

upgrade your browser to Firefox 9 and check
* getfirefox.com

Safari preferences don't work and opens with tabs that were shut down

safari preferences don't work and opens with tabs that were shut down. what to do?

Quit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Launch Safari
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box beside "Remove stored name and passwords"
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Delete safari .plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.Safari.plist
Right click it and select "Move to Trash".
Restart.

HT1212 I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your

I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your device with iTunes" and "If you have Never synced your device with iTunes" . Neither has worked and I'm in a vicious circle with each time after lengthy downloads it still all ends with the program, & my phone, asking for my passcode to proceed. I'm not sure if I have ever synced to my mac book (i may have) but my address book seems to automatically update on both devices without the need to plug in. Thank you for any knowledgable help that could efficiently get me out of this passcode ****!

Hi DRussell,
If you have not sync'd your device to your Mac then you will have to force the phone into recovery mode and restore as a new device. Read the information in this link and follow the instructions to recover the phone:
http://support.apple.com/kb/HT1808
Hope this helps!
Cheers,
GB

My iPods camera, speaker don't work and the battery needs to be replaced, if I send it into apple will they fix it all?

My iPods camera, speaker don't work and the battery needs to be replaced, if I send it into apple will they fix it all?

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ

Ipad can work as a cellphone by putting a SIM card, reciving calls and messages? The messages are send to other cellphones. that don't belong to apple

ipad can work as a cellphone by putting a SIM card, reciving calls and messages? The messages are send to other cellphones. that don't belong to apple

No. The iPad cannot make/receive cellular calls or send/receive cellular text messages. It can only send and receive cellular data, if equipped with 3G.

I can't cancel my creative cloud membership.Links and phone number don't work. PLEASE HELP, I WILL NOT PAY THE NEXT INVOICE!!!

I can't cancel my creative cloud membership.Links and phone number don't work. PLEASE HELP, I WILL NOT PAY THE NEXT INVOICE!!!

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

Make sure your apps are updated. You might try Settings > iTunes & App Store > Automatic Downloads - Updates = "On".
You cannot go back to an old operating system.

I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

Note: No iMac PPC is 27". PPC is for the iMacs that were new until the beginning of 2006. They are all Intel now.
I've requested a moderator move your thread. No action is needed on your part.

Problems with "Background Eraser Tool" and "Blur". The tools don't affect the whole area but just connect the start and the last points.

Hello!
I have some issues with Photoshop CC 2014. The tools "Background Eraser Tool" and "Blur" won't work correctly. When I’m holding down the left mouse button and trying to erase or blur some area, the tools don’t affect the whole area but just connect the start and the last points – like drawing a line. These troubles exist with mentioned tools only, other tools work correctly.
I’ve restored each tool separately, restored all the tools together, installed new drivers for tablet, re-installed Photoshop and even Windows. Nothing helped. These tools worked correctly earlier with the same adjustments, but one day something went wrong.
How can I make the tools work correctly?
Some information about my computer:
• Notebook Lenovo Y560
• Windows 7 Home Basic SP1 x64
• Intel Core i5 2.53 GHz
• 4Gb RAM
• ATI Mobility Radeon HD 5730 1Gb
• Tablet Wacom Bamboo CTL-470

Hi,
I have a similar problem with the Background Eraser tool as well. It's the same both on my PC and on my laptop, both running Win 8.1 and PS CC2014. Would be great to have a solution for this. Did you managed to find a fix?

Spry Horizontal Drop Downs Don't Work in iOS

I designed a site a while ago in Dreamwaever using a horizontal Spry menu system. Whilst I tested it using all the common browsers and it works in all of them I discovered that the second level of sub menus didn't worl on the iPad and iPhones. Client was unhappy so I redesigned it with only one level of sub menu and all was happy with the world. He still is happy as he doesn't update his iPad, but I have discovered with my own iPhone that the drop downs don't work at all now. I am just starting to design another site and have used spry horizontal to test the holding page and this also doesn't work. I am using the very most up-to-date version of Dreamweaver as I have now used the subscription based system.
If Spry doesn't work on iOS then it is no use. Whilst I hate Apple's arogance with disallowing Flash, it is a very popular product and one cannot afford to design sites that can be read on iPads and iPhones.
Is there another way to make drop down style menus? Is there a fix for the Spry menus? I am not big on coding which is why I use Dreamweaver. I did try the version two of the Spry menus, but it appears that you have to hand code all the changes from the default set up and couldn't see any way of including images as I have done on this site.
The site I am using as an example is http://www.raj-bristol.co.uk/
Has anyone got any idea what to do about this problem?
Thanks
Ralph Ferrand
Vision Design UK Limited
www.vduk.co.uk

Spry is no longer being developed or supported by Adobe.
You would be much better off using jQuery Accordion: http://www.1stwebdesigner.com/freebies/jquery-accordion-menus-tutorials/
Or pure css/css3 menus: http://www.noupe.com/css/100-great-css-menu-tutorials.html
Arrogance has nothing to do with the lack of Flash on Apple products, well, maybe 10% arrogance:
http://www.apple.com/hotnews/thoughts-on-flash/
Adobe is also no longer developing Flash for mobile devices.
For video on mobile devices, HTML5 is the way to go now.

Certain keys don't work and Satellite M30-10 beeps

Hi,
I have big weird problem on my Satellite M30-10seven.
When I press certain letter keys on the keyboard they don't work and laptop beeps.
It started with miuj updown seven eight comma right didn't work.
But now I does and comma and down and 8 do too as well as right.
I also get Boot select option on power up that I never got before and sometimes internet explorer tries to go full screen.
Surely not some key is depressed? Because like I said only affects certain keys.
Since writing this j has stopped again.
Any ideas?

I had the same thing on my Satellite with the keys not working - luckily fixing it was fairly easy.
Above the keyboard is a plastic cover which can be easily removed, revealing 3 or 4 screws. Removing these lets you take the keyboard out (lift it carefully, as there is a cable connecting it to the important bits). This cable was the cause of my issue, in that it wasn't connected properly (the connection doesn't seem very secure, so I'm sure it came loose when lugging it around). Simply secure the connection - by pressing the 2 bits together - and replace the keyboard and screws.

Facebook pull-downs don't work and the messages area is blank under the blue navigation bar.

Similar Messages

Maybe you are looking for