Facebook upload - two tags for one face!?!?

Hi everyone. I did a quick search before posting and couldn't find anything.
When I upload an album to Facebook, certain faces are getting tagged twice: once to link them with their Facebook ID, the second is just a text tag (no link) with the same name. It seems to be happening to only some people and only those people.
All my Faces have relevant contact information in their details. Any idea what's going on?

I have this exact same problem and it is very difficult to find something. This thread and one in macrumors is the only thing I have found with no anwers yet.
I thought it was an iPhoto 09 problem, and so I called customer service, but they told me it was more a facebook problem than an Apple one. This is in fact true, and to prove it I did the following:
Using the same computer, the same iPhoto 09, I uploaded the same photos to my wife's account and my own account. This was done separately and just for test reasons. With my wife's account, there was no problem at all, all tags done nicely, everything perfect. With my account though, I got multiple tags for the same person in a single picture. Even worse, everytime I start iPhoto my photos were re-tagged so I ended up with several dozens of tags.
Then I checked and everything in the facebook account settings was exactly the same for both accounts. The only difference between the two is that mine was created two days ago, while my wife's been there for two years.
So I created a new account for my daughter, again just for test reasons, and my daughter's has the same issue of multiple tags for a single face.
This made me conclude the Apple representative was really honest when he says it's a facebook problem. But I beg you that if you find any solution, please post it anywhere here. This is driving me nuts.
Best regards

Similar Messages

  • Two prices for one material in sales order according condition type

    Hi,
    I configure the condition type according to following condition record:
    Plant/ Sales Organization/ Distribution channel/ Material / Customer
    (because system should calculate two prices for one material in two plants)
    In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
    It is so difficult for user to update one by one, because there are several sales orders which need to update.
    Is it any way to solve this problem?
    Thanks,

    > In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
    Hi,
    Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
    Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
    It is said prevention is better than cure
    Hope you get some inputs
    regards,
    Sagar

  • Two address for one company code

    Hi SAPians,
    I have a doubt in maintaining company address for Invoice output!
    Is it possible to maintain two Address for one company code?
    Like if XYZ company code and say it has has two customers AB and CD.
    Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
    If yes, please through light on it.
    Regards,
    Romesh

    Hi ,
    As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
    As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
    Hope it helps.
    Thanks and Regards
    Rohit.

  • Fetch New Data shows two entries for one account

    I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
    Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
    One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
    The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
    I tried deleting
    the offending Gmail account, but it did not delete the duplicate entries.
    erasing all settings
    all of my accounts, including iCloud, IMAP, and other accounts.
    The ghost account is still there, fetching calendars and contacts.
    Has anyone else seen this behavior?
    I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

    Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
    So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

  • How to Upload the Materials for one Plant and then copy the same to all oth

    Hi All,
       I am using Material Types NonStock, Service, Spare Parts and Trading.
       How to Upload the Materials for one Plant and then copy the same to all other plants.
    can anybody give response for this requirement.
    Regards...
    <b></b>

    Hi,
    Using MM01 Only we can upload Plant Details.
    If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
    If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
    Reward Points If it helps you.
    Regards,
    Murali K

  • Two billing for one sales order for same customer

    Dear All ,
    I have a requirement of posting a two billings for one sales order.
    One is for Sales and another is for commission...
    Entry could be
    Sales Entry - Db Customer
                        Cr  Sales
    Commission entry could be
    Db - Cusomter
    Cr- Sales commission income account (P/L)
    We are having third party sales scenario , In this case billing is MIRO dependent.
    Once the miro is done then only billing is possible ...
    Could you please advise on that ..
    Regards,
    Sukh

    Dear Ratish,
    Thanks for yr reply.
    I already did that but it is not serving business purpose.
    Comm payment  - comes diff time than sales payment.
    so ,I will post one entry customer will get hit with total amount Sales + commission
    like below
    Let say 10, 000 is the sales value and 500 is the commission
    So , This entry will get posted
    Customer Db- 10,500
    Sales Cr- 10,000
    Comm Income Cr- 500
    But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
    So, We wont be knowing for which case we have or havnet received the payment against commission.
    As , Customer account is got hit with total amount( Sales+ Comm..value).
    Pls advise how to solve this.
    Regards,
    Sukh

  • Two sids for One instance

    Hi All,
    I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
    Give me the suggestions...
    Cheers,
    Moorthy.GS

    I think you need to define your term 'database' here
    In Oracle world, database is usually referred to as instance.
    a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
    However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

  • LMS 4.2 - Two notifications for one alarm.

    Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
    I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
    Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
    Notification 1
    EVENT ID               = 0002BI5
    TIME                   = Thu 29-Nov-2012 15:26:32 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Notification 2
    EVENT ID               = 0002BI6
    TIME                   = Thu 29-Nov-2012 15:26:57 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Any suggestions?

    Am I alone with this issue of receiving two notifications for one Unreachable event?

  • Two titles for one screen

    Hi Everyone,
    Is it possible to give two titles for one dialog screen.
    Based on a grid i perform centain things where the user has to enter the values in the dialog screen.
    To this screen i want to title based on the which grid it is. Is it possible to do.
    Can anyone help me on this.
    Thanks,
    Prabs.

    when you define the title bar (to be used with set title bar)
    enter the text with place holders like below.
    & & my &
    later in your program you can supply text for & using set title bar.
    set titlebar 'MYTITLE' with 'This' 'is' 'test' .
    This would produce title bar as
    This is my test
    set titlebar 'MYTITLE' with 'Where' 'is' 'Title' .
    This would produce title bar as
    Where is my Title.
    Hope this is clear.
    Regards
    Raja

  • How to create two respone for one request

    Hi
    is there any way for us to create two response for one request
    the scenario is as below
    1. user click on update button for particular record in the datatable (
    after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
    2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
    How can we combine 1 and 2 together
    Here what i have tried and didnt work
    1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
    2. i tried to put the generateExcel function in prerender() method
    but the page will only execute the generateExcel function
    - the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
    3 . i tried to put generateExcel Function after it process the data
    public String updateData()
           //update data
           if(success){
                // prompt user to save excell sheet
            return null;
         }This one also doesnt work and gives the same behaviour as number 2
    The Prompt to save excel sheet still gets popped up
    but the page just doesnt get refreshed
    Thanks
    is anybody know the workaround?

    yea i did set some alert message and clear the table by calling
    provider.removeRow and commitChanges
    it just doesnt reflected in the page that we see
    by actually is already removing the row from the provider
    Thanks

  • Two invoices for one sales order

    I want to create two invoices for one sales order
    Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
    I would say 10% of 100 $
    And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
    Both invoices will be relevant of accounting.
    Would any body suggest this, how it would be mapped it in to SAP.

    Hi Suresh,
    It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
    Go to IMG-SD-Billing-Billing plan.   Do ur own configuration for Billing plan.
    Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
    If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
    Hope this wld help U.
    Regards,
    Praveen

  • Can we create two Filters for one cube

    Hi all,
    I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
    I think ,We have to assign only one filter for one user , please i need clarification....
    Thanks
    Edited by: user98631 on 12 mars 2010 05:13

    You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

  • TS1424 Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

    Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

    Check your purchase history. The second charge may be for unlocking someting in the game or might be in-game items.

  • Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

    Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • Can you have two iPods for one computer?

    I know nothing about iPods so please excuse me for this question that probably has an obvious answer. My sister has an iPod nano that she has been using with our computer for a long time. I just bought an iPod and was trying to set it up. So can I use her i tunes to put music on my ipod or how does it work? I am aware you are not supposed to steal music though. So what am I supposed to do?

    Yes, you can use 2 iPod with 1 computer quite easily.
    Using two iPods with One Computer
    JC

Maybe you are looking for

  • Nested Divs - BG images not showing in IE 6

    I'm using nested divs for the layout of the site below. The div tags have a BG image in each. Everything works fine except in IE6. In that browser none of the BG images show up. Here's the site: http://www.jesseyoung.com/phenopath/test.html CSS is pa

  • Can't update my ipod keep getting 9006 error

    Hi i updated my iphone to 4.3.4 ok but then tried to update my ipod and keep getting error code 9006 tried turning of firewalls no joy it downloads about 550mb out of 650 and as soon as it go's into processing up come code can anyone help please

  • Additional i/o fields to infoset query based on PNPCE logical database

    Hi All, I have a requirement to add two additional input and output fields "job function" and "job family" to a infoset query based on logical database PNPCE. I am new to writing code in infset query and there are so many code areas in infoset query.

  • ZF2 Invoice Creation for Down Payment Order

    Dear All , Kindly give me your inputs on the following issue . 1. Sales order - ZOR  with net value of 1500.00 with material Item cat - TAO- Milestone-Bill.Plan. In item data billing plan tab , i have maintained  Rs 500 as down payment , for billing

  • Need urgent help in a simple java program that adds up even numbers and..

    The task is to write a program that allows the user to enter 8 integers and then displays the sum of the odd integers and the product of the even integers what i did so far is public class Computation private int n; private int even; private int odd;