Facebook won't load on HP ENVY Phoenix 810-135qe CTO Desktop PC running Windows 7

I just bought a new HP ENVY Phoenix 810-135qe CTO Desktop PC running Windows 7. It arrived Tuesday. I set it up, and for some reason it will not run Facebook on either of the browsers I use (Internet Explorer and Chrome).
I uninstalled and reinstalled Chrome a couple of times, uninstalled the trial of McAfee and installed the Norton antivirus software I bought. Cannot figure it out. Facebooks works fine on all over devices in my home, so it is not a FB issue. Any ideas? 
Thanks!

Thanks, Harry. I may have gotten it fixed... I downloaded and ran AVG (I've used it on other computers with no problem) and it flagged a program called browser something-I-don't-remember-what as suspicious. This program may have come installed on the computer and an icon for it was showing up in the hidden icons.  I don't believe Norton or the McAfee trial spotted it.
I uninstalled the suspect program and opened Chrome. A message then popped up, and I believe it was from AVG, telling me that Chrome was configured to use a proxy server but I didn't have one specified. The msg gave detailed instructions to go to the Advanced settings in Chrome and select the LAN box and then uncheck the box telling it to use proxy servers. I hadn't been this deep into the Chrome settings before. In other windows when I was asked if I wanted to use a proxy server I said no. Once I unchcked this box, Facebook  booted up on both Chrome and Internet Explorer. Actually, when I was installing Norton, some proxy server settings popped up and Norton advised me to delete them if I had not specified them. Since we don't use proxy servers, I did. But FB didn't work before I installed Norton.
I had not heard of the iPv6 launch. I will check my adapter setting and see what is selected. If everything is still working on that computer today, I won't disable anything. Thanks again for your help!

Similar Messages

  • HP ENVY Phoenix 810-270st CTO Desktop -Bluetooth and Windows 8.1

    I recently purchased a Phoenix 810 with Integrated Bluetooth 4.0 and Wireless LAN 802.11a/b/g/n/ac featuring Dual-band (2.4 GHz and 5 GHz) 2 x 2 MIMO technology.  when I purchased the system I used the Bluetooth to connect to external bluetooth speakers with windows 8.1.  I could easily see this menu option in my network option in the control panel.  Recently I tried to use the speakers but could not however they show in my system devices.  I also tried to add new and discovered thar Windows is not longer showing anything with Bluetooth in the control panel.
    I have downloaded latest drivers but Windows still does not recognize bluetooth in the control panel anywhere.  Any idea why I could setup and pare bluetooth deviced and now I can't?

    Hi,
    I am running Windows 8.1 with Bluetooth and Bluetooth does not show in the Control Panel.  Look for the Bluetooth icon on the task bar.  See the below image.
    Once you pair up and acknowledge the passcode on both devices this the following screen should appear (example).
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • My Book 3.0 (1TB, USB 3.0) detection problem with Envy Phoenix 810-135qe

    I have  a My Book 3.0 (1TB, USB 3.0)... The older My Book not the newer one... "My Book Essential" or something like that.
    I was using it with W7 x64 backup utility on an older HP desktop (HP Pavilion a6560t) without issue up to the day my new HP Envy 810-135qe arrived. I downloaded the latest drivers from WD support, and the thing PnPed fine off the non-powered USB 3.0 on the back of the 810. However, the 810 drops connection after sleep, hibernation, lock, or simply just over time. I've run diagnostics on the WD and the cables, all checked out fine. I tried shutting off power saving to the USB 3.0s in device manager (just a guess), and that seemed to work for a few weeks, however I'm still having the detection issue periodically. All of my drivers are up to date on the HP side. I'm fully reformatting the WD now to see if that might somehow fix the issue (I'll update in a few days on how that worked out).
    Anyone have any idea what's amiss? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks I've already done myself) and they got really spooky on another chat when I asked about adding a SSD as the boot drive (I knew it was an issue from here and other forums).... Handed me off to second tier support, and all they would tell me is that they couldn't tell me anything... Basically, no support for any config except for how it was shipped because it's a "custom build" (yes, buyer's regret big time).
    Secondly, anyone running a similar config with a en external back up that's running smoothly? My WD is getting old so I was thinking of one of the newer portable USB 3.0 HDDs (both 2.5 and 3.5). My specs follow.
    HP Envy 810qe - Win 7 (810-135qe)
    Product number: F9A63AV#ABA
    Windows 7 Home Premium 64
    4th Generation Intel(R) Core(TM) i7-4770K processor quad-core [3.5GHz, 8MB Shared Cache]
    4GB Nvidia GeForce GT640 [DVI,DP,HDMI & VGA via adapter]
    12GB DDR3-1600MHz [2 DIMMs]
    2TB 7200 RPM SATA Hard Drive
    16GB mSATA SSD Cache
    Microsoft Office Trial
    Security software trial
    Blu-ray Reader & SuperMulti DVD burner
    15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
    No TV Tuner Card
    Integrated Sound, Envy Audio; Beats Audio
    HP USB keyboard and optical mouse
    HP Wireless 802.11 a/g/n with Bluetooth(R)(2x2)
    HP Home & Home Office Store in-box envelope
    This question was solved.
    View Solution.

    Anglogator, welcome to the forum.
    I have the exact computer (See my signature below.).  I have installed a Samsung EVO 840 500 GB SSD.  It works absolutely great.  Samsung SSD's seem to be the only brand that boots without changing any settings in the UEFI Firmware.  If you decide to buy one, I will be glad to walk you through the installation process.
    I also have a "WD My Book Essentials" 2 GB external hard drive.  It works perfectly without making any changes to the BIOS.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Facebook won't load on Macbook pro with 10.8

    Facebook won't load on Macbook pro with Mountain lion on a small homw network at home
    I am on a wifi Network. Girlfirend's Macbook got no problem with Facebook on the same network (she got snow leopard installed)
    Facebook WILL load when i connect my computer directly to the the modem, bypassing the router.
    Facebook will load when i use Windows 7 on VMWARE.
    What i already tried:
    1- Reset the router
    2- cleaning caches on all the browsers i'm using (Chrome, Firefox, Safari)
    Never had that problem with 10.7
    Mystery, don't know what i should do except reinstalling Mountain lion...
    Any idea?

    Edge Inspect desktop has no UI and only Inspect icon will be visible in the menu bar. Also, you need to be logged in with Adobe ID in the app.

  • Facebook won't load on any browser

    I've seen a lot of people posting since 2009 that they've had this issue but I've yet to see an answer that's worked for me.  Facebook won't load on ANY of the browsers so cookies and cache won't help. When I log out of the Mac and log back in I can get into Facebook for a while so it's not a configuration issue.  I CAN log into facebook through IE on the parallels section.  This started about three months ago for me.

    Did you look at any of the "More Like This" on the right side of the screen? I don't know if they hold the answers for you, but some may be worth taking a peek.
    The usual answer seems to be 'clear your cache' but, as you've done that, it doesn't seem the answer to your problem. When you say 'all browsers' I assume that you mean Firefox, Chrome and Safari? I run Firefox almost exclusively, only using Safari and Chrome for testing purposes and I've tried all three and can't replicate your problem. I don't think that uninstalling Adobe Flash is the answer (and, as it is ubiquitous, it's really a necessary evil).
    Try an app such as Onyx to make sure that everything is actually cleared. If that doesn't help, ring back.
    BTW - is this occurring only when you try to log in to Facebook?
    Clinton

  • FACEBOOK WON'T LOAD ON SAFARI 7

    Facebook won't load on Safari 7, any other site will open except the Facebook. Any ideas???

    Run software update and see if there is a Java update. Install it and re-enable java on safari.

  • Facebook won't load on Safari

    Facebook won't load on Safari, but is ok. on Chrome.  What can I do to get it back on Safari?  I thought it may be something to do with Java, so have disable that but still not working. 

    Run software update and see if there is a Java update. Install it and re-enable java on safari.

  • Windows 7 64bit USB 3.0 driver for HP ENVY Phoenix 810-200nc

    Hello,
    I bought HP ENVY Phoenix 810-200nc with windows 8.1preinstaled. I wiped up win 8 and install windows 7 proffesional 64 bit, but USB 3 dont working (mouse, keyboard its ok, but external disk no), USB 2 it's absolutely ok.  THX.

    Can you post the PCI\VEN character string for the USB device that lacks a driver? 
    The following image is an example. Right click any device without a driver and select properties to invoke the properties window. See the cues I pointed out in the Properties window to get to the PCI\VEN character string. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hp envy phoenix 810 shuts down by itself when not in use

    I purchased a HP Envy Phoenix 810 December 2013 and use Windows 8 365 on it.  This is a home computer and is used for general purposes - no gameing, etc.  It will just shut itself down when we are not using it for awhile, but not on a consistent basis.  For example, early Sunday it had shut itself down sometime, I started it in the morning, and twice more it shut itself down through the day.  I finally turned it back on Monday afternoon, and it stayed on through the evening and night, and it was still on Tuesday morning.  I can't seem to find a pattern to when it decides to shut down.  I've run Norton, Malwarebytes, Superantivirus and haven't found anything.  I have the same computer & software (Norton, Microsoft 365) at work and haven't had a problems with it.  I've updated it with HP's updates.  Any suggestions?

    Usually when a computer shuts down it is because of an overheat problem but doubtful it it is a idle.  Be sure that it is no near any heat source and that the fans are clean with no obstructions and use a can of air to clean the inside of the computer.
    Another cause is the power supply, either the PSU is faultering or the wall socket may be getting some interupts.  Worth checking out.
    Have a look at your power settings in the Control Panel, see this site:
    http://www.troubleshootwindows.com/windows-8/fix-windows-8-shutdown-restarts-if-left-idle/
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    Deleting the System Preference or other .plist file
    ..Step by Step to fix your Mac

  • Usb 3 card for ENVY Phoenix 810-003a

    Hello All, First time poster. could somebody advise me as to the best, or at least, compatible USB 3.0 pcie card for my new HP ENVY Phoenix 810-003a . 4 ports are preferable. Thanks in advance. R

    Hi,
    Based on the following specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03975432#N90
    It has:
    Expansion Slots:
    1 PCI Express x16 (Gen3.0)
    3 PCI Express x1 (Gen2.0)
    1 half-length mini card
    Any standard PCIe Gen 2 - USB card will do the job such as:
       http://www.startech.com/Cards-Adapters/USB-3.0/Cards/4-Port-SuperSpeed-USB-3-PCI-Express-Card-with-S...
       http://www.everythingusb.com/highpoint-rocketu-1144a-usb-3.0-pci-express-21274.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • IPhoto[v 9.5.1] on MBP won't load photos from iPod touch Gen4 32GB, even if let run overnight

    iPhoto [v 9.5.1] on MBP won't load photos from iPod touch Gen4 32GB, even if let run overnight and don't let machine go to sleep.
    MBP has 8GB Ram and separate video card using 2.3 Ghx i7 processor ... so i don't think it is a hardware issue.

    Hello A_MadDog,
    It sounds like you are not able to import photos from your Camera Roll on your iPod touch.  I recommend following the steps in the article below for the issue you described:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Where can I download HP TOOLS for my HP ENVY h-8 1520t CTO Desktop PC: Windows 8.1 Pro 64 bit?

    HP Tools partition was deleted! I need to download the HP TOOLS for my HP ENVY h-8 1520t CTO Desktop PC? 
    Thanks for form members help.
    This question was solved.
    View Solution.

    Hi,
    The HP_TOOLS partition can be re-created by installing the Diagnostic software package found on the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-141219-1&cc=us&dlc=en&lc=en...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Facebook won't load on my Mac

    I just got my Mac a few months ago, and I never had a problem loading any page. For the past few days Facebook won't open. I Googled many solutions, none of which worked. I restarted multiple times, updated software, deleted cookies, emptied cache, tried Facebook on Firefox, installed the newest Flash, but it won't load anywhere. Every other page loads except Facebook. Please help.

    Hi,
    updated software
    Facebook requires the latest version of Safari which is 5.0.4. Make certain your software is up to date just in case.
    From your Safari menu bar click Safari / About Safari. If the version number is not 5.0.4, click your Apple menu (top left in the menu bar) then click Software Update.
    If you have 5.0.4 installed, from the menu bar click Safari / Preferences - then select the Extensions tab. If you have any installed, turn that off, then restart Safari, try Facebook.
    And again in Safari / Preferences select the Security tab. Make sure the box next to: Java is selected. Then click: Show Cookies. Delete all Facebook cookies. Restart Safari, try Facebook.
    Carolyn

  • Facebook won't load properly

    facebook no longer loads properly.  comes up with a white page

    where is the fix?
    I missed the fix!

Maybe you are looking for