Facebook won't work properly since I just switched to my iPhone 5s.

I loaded Facebook to my new iPhone 5s.  It won't let me read comments. When I hit the button to read comments, it only offers to let me make a comment.  Same thing happens when I am reading a post and want to continue reading- it just offers to let me make a comment. It won't show me the rest of the post. Also when I am sending a PM it won't let me see what I am typing to the other person.
Also I find the letters are too close together on the 5S. Hard to type legibly!

there is no way to go bacl to ios 6. have you tried restoring your phone?

Similar Messages

  • Photoshop elements uploader to facebook won't work properly.

    Photoshop Elements 11 gives the opportunity to share pictures with facebook.
    The facebook uploader doesn't work for me. Uploading in high resolution won't work at all. But even in standard resolution, the following problems occur:
    1) uploader does not recognise albums in facebook, and
    2) worst of all: uploades images won't be visible to friends, unless they dive into yout profile. I mean: in the uploader window i choose: visible to friends. When i log on to facebook, the images are there, but they are tagged as privat. Untagging them to 'visible for friends' won't help.
    What am i doïng wrong (PRE11)
    While uploading al settings are correct, in facebook settings become different.
    Operating system: W7, 4GB RAM, E8600
    Browser: IE 9
    (i posted this question before, apparantly in a wrong forum

    Hello Andaleeb,
    Thx for your suggestion to a solution. I'm sorry to say that it doesn't answer (all) my questions. I will try to see what difference matching the settings give, but no mather the result the following question persists:
    I have to choose an option: adding to an existing album or creating a new one. Since most of the time i (read: my wive) wants to use the uploader to share some photographs with friends, the only right option seems to create a new album. (I could live just fine without creating an album, but that option isn't available).
    So: While creating a new album with the uploader, the uploader is used to set the settings vof the new album. Now the trick: the album in facebook gets different settings.
    I would very much appreciate an solution to this particular problem.
    Thx for your help in advance.

  • Keypad won't work properly on 'A'

    I need help about my keyboard. i'm using a curve 8520 on 0S5.
    My letter 'A' in the keyboard suddenly won't work properly.. Just a soft touch and it would appear automatically... in Uppercase. Because of this, i am having a hard time when typing. i copy paste the lower case 'a' so typing would be easy.
    Also, since the 'lock' is also in that key, my phone would always lock automatically and with that... my phone seems to go 'off' and i would have to longpress any key so it would come alive again.
    i tried the application clean-up thing in the desktop manager as @BlackberryHelp tweeted me when i asked them about this but still there are no changes.. i also tried putting a tissue in the back of the metal plate thing. i am so worried coz i just got this phone 3 months ago. Please help me about this! Thank you so much.

    i managed to unlock my phone by keeping power on, remove battery and presto its unlocked. problem is stil letter "a" in keypad is not working can anyone suggest how to fix it instead of going to a technician?

  • Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Try to force quit the mail app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

  • Why does my Facebook not work properly since loading yosemite and why does it ask me to load java runtime overtime I log in

    My Facebook does not run properly since upgrading to yosemite, some sections i can't get in and you see the waiting clock then safari says it can't find it, not all photos load properly, also keep on getting you need to load java runtime overtime I log on even though it has verified it.

    It works completly fine in applet viewer, im at a loss here

  • Since updating to ios 6 my ebooks won't work properly on my iPad. Skips from first page of a chapter directly to first page of next chapter. I'm very unimpressed

    Since updating to ios 6 yesterday, my ebooks won't work properly. They jump from first page of one chapter onto first page of next chapter. Obviously missing all the pages in between. Anyone else having this problem? Help please....

    I have a similar problem with Microsoft Visual C# 2010 Step by Step.  This ebook worked fine until I upgraded to ios 6.

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

  • My music app on my iphone 5 is not working properly since I downloaded ios7.

    The music app on my iphone 5 is not working properly since I downloaded ios7.
    Sometimes I start to use the music app and then part way though a track it stops. I try to re-start it with no joy. I'm also finding the touch screen is less responsive. Can any help me fix the issue or will I need to take it into the store?

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

    My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
    This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
    Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
    Can anyone tell me how I completely disable it?
    Thank you.

    Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
    Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

  • Why has my Kodak all in one printer stopped working properly since downloading Yosemite?

    Printer feeds paper and ink carriage passes twice and then stops.  Eventually the paper is spat out with no ink on it.  Bizarrely the printer works fine if you request a test print or printer head alignment test.  Is this a software issue?

    Yup this truly *****!!! My Kodak all in one printer also won't work either since I updated my Mac Just have to say Apple that it is really disappointing when you are running a small business and you have to spend extra expenses that shouldn't be necessary in buying a whole new printer. I checked your printer updates and sure enough there was every update for every other printer except Kodak. Ah well.. while am going to spend money on a new printer I might as well spend money on a new computer too.

  • FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

    FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

    Sometimes thisworks:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

  • My trackpad is not working properly since installing the upgrade. What should I do?

    My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

    i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

  • Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

    Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

    Read A fix via Virtual XP
    http://forums.adobe.com/thread/702693?tstart=0

Maybe you are looking for

  • Active Directory Issues 10.7.4 & 10.7.5

    Hi I'm having problems with all my 10.7.4 & 10.7.5 mac's. They're losing their connection to AD. When I got to unbind I get the follwing error: Unable to access domain controller This computer is unable to access the domain controller for an unknown

  • How to get contract's measures with 0REFX_2 extractor ?

    Hello, I try to use standard extractor 0REFX_2. It's ok with property measure value (object type IG) but for contract (object type IS) it doesn't get anything. Do you know why ? Is there another extractor for contract's measure ? Thank you in advance

  • Adding third-party SSD drives to Xserve

    Has anyone tried this? I would like to buy a new Xserve and migrate to 10.6, but since my application would benefit greatly from SSDs, I would like to buy build an Xserve with a SSD boot drive, and two SSD drives in RAID1. Since Apple doesn't offer S

  • I DELETED SOME OF LIGHTROOM MODULES, ALL BUT DEVELOP AND LIBRARY

    Several versions ago, possibly 3.6, I deleted several of the lightroom modules, all but LIBRARY and DEVELOP. Now I need them all. I have installed 4.4 but the modules have not returned to the top of the LR window. I cannot remember where I might have

  • Time machine duplicate backups

    I have just bought a NAS which I am going to use for Time Machine backups. I also want to keep a copy (off-site) in case anything happens to the NAS or burglary. I currently have a 2TB external hard drive which I use for Time Machine, can I switch be