Faced issues with iPhone 5

Hi,
I bought my iPhone 5 from Germany just after the launch.
However I live in Turkey and I didn't have chance to try my iPhone before I got back to Turkey.
After I turned back to my country I have noticed that there are several dust on camera sensor as you can see below pictures.
In additon after a while the lock/power button stop working as well.
Apple claims that Apple products have 1 year international warranty but this doesn't work in Turkey.
Nobady gets responsibility of any Apple product if the customer buys it from any foreign country.
I don't wanna go to Germany just to visit an Apple store to solve my problem and I couldn't find any email address to contact with email.
I am a loyal customer and I almost have all Apple products.
Could please check and advice a solution to solve my problem ?
Best Regards,
Tayfun Tarı.

You're not speaking to Apple (just fellow users) and iPhones do not have (and never have had) an international warranty, as you've found out. Sorry, but this is the risk you take trying to save money.

Similar Messages

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

I am having issue with iphone 5 bluetooth , not able to connect honda CRV

I am having issue with iphone 5 bluetooth , not able to connect to my honda CRV

Don't know if you could consider this an Apple issue. I know you are probably frustrated, and I am not defending Apple here, just saying that the iPhone does not update to support individual automobiles, the automobile manufactures update to support the Bluetooth profiles.The iPhone has the latest Bluetooth stack and supports a number of things. Problems generally revolve around the manufacturer not supporting the lastest Bluetooth version and have to update their systems. Check with Honda, they are probably aware of this, and if you search the forum, you will find a number of posts regarding the CR-V.

Facing issues with oracle client installation 32 bit 10.2.0.1

Hi ,
I am facing issues with oracle client installation 32 bit 10.2.0.1
Windows 2008 R2 enterprise edition 64 bit
Java 1.6 update 34
Below is the error recieved:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079055
Function=[Unknown.]
Library=C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
NOTE: We are unable to locate the function name symbol for the error
      just occurred. Please refer to release documentation for possible
      reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Native Method)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:516)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:473)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.setInstallerKey(OiipgBootstrap.java:511)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:418)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:401)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:872)
Dynamic libraries:
0x00400000 - 0x0040B000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\javaw.exe
0x77C60000 - 0x77DE0000 C:\Windows\SysWOW64\ntdll.dll
0x75AB0000 - 0x75BC0000 C:\Windows\syswow64\kernel32.dll
0x77420000 - 0x77467000 C:\Windows\syswow64\KERNELBASE.dll
0x77370000 - 0x77410000 C:\Windows\syswow64\ADVAPI32.dll
0x76610000 - 0x766BC000 C:\Windows\syswow64\msvcrt.dll
0x75DD0000 - 0x75DE9000 C:\Windows\SysWOW64\sechost.dll
0x776E0000 - 0x777D0000 C:\Windows\syswow64\RPCRT4.dll
0x757C0000 - 0x75820000 C:\Windows\syswow64\SspiCli.dll
0x757B0000 - 0x757BC000 C:\Windows\syswow64\CRYPTBASE.dll
0x77470000 - 0x77570000 C:\Windows\syswow64\USER32.dll
0x764F0000 - 0x76580000 C:\Windows\syswow64\GDI32.dll
0x77C30000 - 0x77C3A000 C:\Windows\syswow64\LPK.dll
0x75820000 - 0x758BD000 C:\Windows\syswow64\USP10.dll
0x74EA0000 - 0x74EEC000 C:\Windows\system32\apphelp.dll
0x6EF10000 - 0x6EF9D000 C:\Windows\AppPatch\AcLayers.DLL
0x76720000 - 0x7736A000 C:\Windows\syswow64\SHELL32.dll
0x761D0000 - 0x76227000 C:\Windows\syswow64\SHLWAPI.dll
0x76350000 - 0x764AC000 C:\Windows\syswow64\ole32.dll
0x75F30000 - 0x75FBF000 C:\Windows\syswow64\OLEAUT32.dll
0x74660000 - 0x74677000 C:\Windows\system32\USERENV.dll
0x74650000 - 0x7465B000 C:\Windows\system32\profapi.dll
0x74340000 - 0x74391000 C:\Windows\system32\WINSPOOL.DRV
0x74570000 - 0x74582000 C:\Windows\system32\MPR.dll
0x6E8B0000 - 0x6EAC8000 C:\Windows\AppPatch\AcGenral.DLL
0x6EFA0000 - 0x6F020000 C:\Windows\system32\UxTheme.dll
0x6F060000 - 0x6F092000 C:\Windows\system32\WINMM.dll
0x74840000 - 0x7484F000 C:\Windows\system32\samcli.dll
0x6F0D0000 - 0x6F0E4000 C:\Windows\system32\MSACM32.dll
0x74C80000 - 0x74C89000 C:\Windows\system32\VERSION.dll
0x6F340000 - 0x6F343000 C:\Windows\system32\sfc.dll
0x6F260000 - 0x6F26D000 C:\Windows\system32\sfc_os.DLL
0x6F040000 - 0x6F053000 C:\Windows\system32\dwmapi.dll
0x758C0000 - 0x75A5D000 C:\Windows\syswow64\SETUPAPI.dll
0x75C90000 - 0x75CB7000 C:\Windows\syswow64\CFGMGR32.dll
0x77570000 - 0x77582000 C:\Windows\syswow64\DEVOBJ.dll
0x75DF0000 - 0x75F27000 C:\Windows\syswow64\urlmon.dll
0x775A0000 - 0x77695000 C:\Windows\syswow64\WININET.dll
0x75FD0000 - 0x761CF000 C:\Windows\syswow64\iertutil.dll
0x76230000 - 0x7634E000 C:\Windows\syswow64\CRYPT32.dll
0x75FC0000 - 0x75FCC000 C:\Windows\syswow64\MSASN1.dll
0x6F0C0000 - 0x6F0C6000 C:\Windows\system32\SHUNIMPL.DLL
0x6F030000 - 0x6F03D000 C:\Windows\system32\SortServer2003Compat.dll
0x75CC0000 - 0x75D20000 C:\Windows\system32\IMM32.DLL
0x75BC0000 - 0x75C8C000 C:\Windows\syswow64\MSCTF.dll
0x08000000 - 0x08138000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
0x10000000 - 0x10007000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\hpi.dll
0x003F0000 - 0x003FE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\verify.dll
0x007B0000 - 0x007C9000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\java.dll
0x007D0000 - 0x007DE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\zip.dll
0x051D0000 - 0x052E2000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\awt.dll
0x052F0000 - 0x05341000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\fontmanager.dll
0x6E7C0000 - 0x6E8A7000 C:\Windows\system32\ddraw.dll
0x6F020000 - 0x6F026000 C:\Windows\system32\DCIMAN32.dll
0x75DA0000 - 0x75DCD000 C:\Windows\syswow64\WINTRUST.dll
0x6E6F0000 - 0x6E7BC000 C:\Windows\system32\D3DIM700.DLL
0x05770000 - 0x05793000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JavaAccessBridge.dll
0x007E0000 - 0x007E5000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jawt.dll
0x007F0000 - 0x007F7000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JAWTAccessBridge.dll
0x06340000 - 0x06359000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\oui\lib\win32\oraInstaller.dll
0x06470000 - 0x0648E000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jpeg.dll
0x776B0000 - 0x776DA000 C:\Windows\syswow64\imagehlp.dll
0x6E600000 - 0x6E6EB000 C:\Windows\syswow64\dbghelp.dll
0x776A0000 - 0x776A5000 C:\Windows\syswow64\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation   total 704K, used 90K [0x10010000, 0x100d0000, 0x10770000)
eden space 640K, 13% used [0x10010000, 0x10026448, 0x100b0000)
from space 64K,   2% used [0x100c0000, 0x100c07a8, 0x100d0000)
to   space 64K,   0% used [0x100b0000, 0x100b0000, 0x100c0000)
tenured generation   total 8436K, used 5698K [0x10770000, 0x10fad000, 0x16010000)
   the space 8436K, 67% used [0x10770000, 0x10d00a40, 0x10d00c00, 0x10fad000)
compacting perm gen total 12288K, used 12049K [0x16010000, 0x16c10000, 0x1a010000)
   the space 12288K, 98% used [0x16010000, 0x16bd47a0, 0x16bd4800, 0x16c10000)
Local Time = Thu Aug 22 14:42:03 2013
Elapsed Time = 40
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
Thanks

10.2.0.1 is not supported/certified on Win 2008, so expect issues with the install and/or with using the software.
Why cannot you use a supported version - minimum is 10.2.0.4, which is only available to customers with an Extended Support contract
http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#BABGFAJI
HTH
Srini

Is anyone having Mic issues with iPhone 5?

Is anyone having Mic issues with iPhone 5? Speakerphone works but not the mic, on phone calls and memos.
Took it to local Genius campus and after taking off the back screen and case, they blew air into the mica and it worked for about 20 mins.
I can't have a ready can of air around every time the mic goes out.
Anyone else had similar issues?

I am having a similar problem. I had the iPhone 5 delivered yesterday. On most of the calls I tried, the person on the other end could hear me just fine on speakerphone, but not on the regular mic. It was garbled, or I would cut in and out. I could always hear the other person clearly.
I just got back from a Genius Bar appointment where they gave me an entirely new phone. The issue exists on this one also, though now it seems like the audio is more muffled than garbled or spotty. Again, speakerphone works, and I can hear the other person clearly.
I had originally restored backup from my 3GS, but before I went to the Genius Bar I restored to factory settings just to be sure it wasn't a software issue (it wasn't, apparently). I did not restore from the old phone for this new handset either.
Thanks for any suggestions...frustrating, for sure!

Is anyone facing issues with the iphone5 camera

Is anyone facing issues with the iphone5 camera

Demo wrote:
Posting the details takes all of the fun out of guessing, and I feel like I have been guessing for two days now. Must be an epidemic.
Sorry to go OT.
Does seem to be a bit of an epidemic of posters thinkng we are all John Edwards clones

Is there any issue with iphone 6 64gb storage?

Is there any issue with iphone 6 64gb storage?

Not sure why you would be led to believe that has anything to do with storage.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

HT4946 audio issue with iphone 4 with video recording

audio issue with iphone 4 with video recording

http://www.iphonebackupextractor.com/
Basic troubleshooting steps.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Network issue with iPhone 5s and iOS 8

Hello,
i am using iPhone 5s and iOS 8 updated till date.. I have having an issue where my Vodafone network suddenly shows no signal .. It never happened before. iOS 7 never had this problem. What do I do. I did a few things as discussed in earlier network issue questions. Vodafone never has reception problem.. since I installed iOS 8 I am facing this problem . What do I do now..

Hello, Aniket2210.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with your iPhone searching for service and no signal. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the attached articles below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
iPhone cellular data connection issues
http://support.apple.com/en-us/HT201415
Cheers,
Jason H.

Bluetooth buggy issues with iphone 5s after ios 8 upgrade

I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not.
What I have tried:
1) Hard reset
2) deleted and re-setup all bluetooth settings on both phone and car
I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

Issue with iPhone 5 (AT&T) when reconnecting to LTE.

I recieved my iPhone 5 (on AT&T) a few days ago and have noted an issue with the LTE connection when you try to reconnect after loosing my signal.
In the morning, for example, I will have a good LTE connection, then I go to work where the cell signal is fairly spotty, at best, in the building. I will notice my signal switch to Edge (not even 3G...but Edge, of all things). Then when I leave work the phone won't reconnect to LTE, even after toggling the LTE and cellular data on and off. It just sits on Edge and won't even load my email. I have to restart my phone to get a connection again.
Has anyone else had this problem? I hope it's just a software issue that can be fixed with a future (hopefully a near future) update.
(And don't go using the "AT&T is horrible" argument. I have a good number of friends would would say the same of Verizon. It's a weak argument...like playing the "race card" in a debate.)

After talking to an Apple rep, I first tried reset teh network settings, but that didn't have any effect. Then I went and completely reset the phone to factory spec and restored the phone...which seems to have done the trick. Now I'm getting and holding a strong 4G connection in the stockroom that previously completely killed my signal.

Apple TV buffering issues with iPhone 4s and iPad 2

Hi all,
I just got me an Apple TV 2nd gen (yeah, I know, ordered 2 days before the presentation of the new one). So far so good, the device is up and running, connects just fine to my Airport Express router and all.
However, if I try to stream a video from my iPad (2) or my iPhone (4S), the results are quite horriffic. The iPad videos would buffer for a very long time before they start and then quite fast after that the buffering problems restart. It's pretty impossible to play a video fluently of more than 20 seconds. If I'd try from my iPhone it's even worse with videos being 1080p, the thing just never plays, eventually the preloading process stops on the mirroring mode is cut.
I have to point out, all my devices are in the same room (WiFi) so the signal is the best it can be.
This is honestly quite surprising AND disappointing to be honest, given I bought the device mostly for that, so I can stream videos from my phone and pad.
Tell me, am I doing something wrong, or the video streaming over those devices is just a marketing gimmick with nothing real behind it?
Would it matter if I change my router from Airport express to Airport extreme?
Thanks!

I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
and plays properly.
Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
Thanks again.
JP

Home Sharing issues with iPhone 6 Plus

Hi guys,
I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
I have no clue as to why this is happening.
Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.

UPDATE
So, after working with the guys at Apple, they we were to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name).

Facing Issue With Oracle SOA Suite 11.1.1.3.0

Hi All,
I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
Hope you people can help us out.
Please find the issue details below along with all the relevant information’s
I have following SOA suite installation at my server:
Oracle 10g Express Edition Universal 10.2.0.1
RCU 11.1.1.3.3
Web Logic Server 10.3.3.0
SOA suite 11.1.1.3.0
JDeveloper 11.1.1.3.0
The first thing what I have done is created a web service and deployed it to server without any issue.
After that I created proxy client for that service and accessed it successfully from the client end.
Till here no issue occurs.
After that I applied few policies on top of web service and deployed it to server.
The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
While deploying there was no issue, all went well.
2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
I have followed this blog:
[http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
Please have a look on service and client code:
Service Code:
package Demo_ScoreCard;
import javax.jws.WebService;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
@WebService
@SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
public class ScoreCardWithPolicy {
public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
double result;
result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
return result;
Client Code:
package com.tec.proxy.client;
import java.util.Map;
import javax.xml.ws.BindingProvider;
import javax.xml.ws.WebServiceRef;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
public class ScoreCardWithPolicyPortClient {
@WebServiceRef
private static ScoreCardWithPolicyService scoreCardWithPolicyService;
public static void main(String[] args) {
scoreCardWithPolicyService = new ScoreCardWithPolicyService();
SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
double arg1 = 77.2;
double arg2 = 79.2;
double arg3 = 77.2;
double arg4 = 76.2;
double arg5 = 67.2;
double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
System.out.println("clientResult with policy =====> " + clientResult);
Error Log:
SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
at javax.xml.ws.Service.getPort(Service.java:133)
at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
Process exited with exit code 1.
Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
Apart from above issue I have few queries like:
1.What is difference between OWSM policies and WLS policies?
2.Are these the only policies we can apply on top of services?
3.If some one wants to configure his own custom policies than what need to be done
4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
Looking forward to hear from you people.
Thanks
Arvind
Edited by: user8490871 on Apr 15, 2011 12:53 AM
Edited by: user8490871 on Apr 15, 2011 12:53 AM

Hi,
I don't know why u get an error. Here are answers for additional questions:
1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
2. I don't know about other policies
3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
5. I can see OSB 11.1.1.3 download link here
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Regards,
Milan

Sync issues with iPhone 6 Plus and iTunes

I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.

Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments.

Faced issues with iPhone 5

Similar Messages

Maybe you are looking for