[Faces] Dropdown - DBSequence, Number mismatch
Hi All,
Another faces question. I dragged and droppend a country table as selectOneChoice dropdown list for an organisation table.
However, the id-field in the country table is a DBSequence and the foreign key in my organisation table is a Number. When I run my application I get a type-mismatch..
But what can I do to resolve this problem?
Has anyone got a clue?
Regards,
Gideon
Nevermind, I already found the problem.
It had nothing to do with the dropdown list. It had to do with another problem which I solved already.
Thanks anyway.
Similar Messages
-
HP pavillion 14-n232tu,H/W Parts' CT Number Mismatch Always During Replacement Case
Dear Sir/Mam.
My laptop is HP pavillion 14-n232tu, Windows 8.1
The laptop is under warranty for 3 years including one year accidental damage protection. We paid in advance for extended warranty to three years from Hp Holiday Offers.
Within 3-4 months the display started troubling and i filed a complaint at the customer care. Engineer visited and told that DISPLAY will be replaced. Instead of directly getting the display replaced i faced another problem from your side that, CT. NUMBER DIDN'T MATCH. I had to wait for two week for the resolution of the same from Bangalore office. Somehow, the case got accepted and it got changed.
Case of HARD DISK FAILURE, CT. NUMBER DIDN'T MATCH, Uninformed closing of complaint
Within 3-4 months of the previous complaint, i had to again face boot issues of the laptop. I filed the complaint, engineer visited and told that HARD DISK will be replaced. I thought this time the hard disk will get replaced without any trouble but again the problem came from your side that, CT NUMBER DIDN'T MATCH. The complaint got transferred to Bangalore office and this time it got rejected causing more trouble and UNINFORMED CLOSING of the complaint without even contacting me beforehand. And i had to file another complaint for the same issue
Case of CT number mismatch of hard disk drive, Rejected Case carry forwarded. Not resolved till date, stalled for more than 20 days and still going on.
I has been 7-8 months and already two parts are defected. Above than than i am not provided smooth flow of replacement, every case i have to wait for two weeks to get the previous part replaced. And this case it has been more than 20 days!!
There is problem with this laptop's part and regarding the database of the parts' CT NUMBERS too from your side which is causing even more problem than the defected parts. I expect you to replace my product assuring best of your service as always. Please look forward to my complaint. I have all the case Ids of the above mentioned complaints.
Thank You@Replacement
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Cheers,
KarolB
I work for HP -
Week Number mismatch in SAP Calender and Outlook express
Hi Gurus,
One interesting issue ... In SAP calenders (used in portals/ESS/MSS), there are week numbers mentioned at the beginning of each week. And SAP considers the week where 1st Jan falls as the 1st week of the year. Where as in outlook express or the physical calendars distrubuted in organizations, it generally considers the 1st complete week (or majority of days in the week) of the year as the 1st week.
Say for 2011, week 1 as per outlook express or physical calenders start from 3rd Jan and the previous week is considered as 53rd week of 2010. This is leading to a week number mismatch.
I believe this is the standard settings ... but is there any settings available through which one can change this week number ?
Thanks
AllenOK Guys .. .found the solution ... Please refer to note 1434119 .... just upgrade to EHP4
Hope this helps those who r still facing this issue.
Thanks
Allen -
Magic number mismatch: bad mzip file in 3750 stack switch
Hi All can anybody help me in this error msg
"magic number mismatch: bad mzip file"
I am trying to upgrade the switch with"c3750e-ipbasek9-tar.122-55.SE5.tar" in 3750 stack switch it is showing this error msg while booting
thanks in advanceHi,
The reason you are getting this error message on the switch is a corrupt or wrong IOS image "c3750e-ipbasek9-tar.122-55.SE5.tar".
If the switch is in rommon mode, and you have any other image in the switch, boot it using that image. Once the switch is up, download and copy the correct IOS image once again on the switch and try to upgrade.
If you need help in finding the correct IOS image, give me the exact switch model number, i will help you with that.
But forsure the image is wrong or corrupt and that is why you are getting this error.
Thanks
Ankur
"Please rate the post if found useful" -
Major version number mismatch warning ?
Flatform : RedHat Linux7.1
Program : j2sdk-1_4_0-linux-i386.bin
I have this error after installing jdk1.4.0 and typing 'javac' :
===========================
Warning: Major version number mismatch.
Warning: Minor version number mismatch.
Warning: Major version number mismatch.
Warning: Minor version number mismatch.
Warning: Major version number mismatch.
Warning: Minor version number mismatch.
Warning: Major version number mismatch.
repeat...
Why this error do occur?
How can I complete jdk1.4 installing?I'm getting the same warning as well. I recently upgraded from Red Hat 7.1 -> 7.2 and have j2sdk1.4.0.
I get the following warnings when I actually run programs:
Warning! Major version number mismatch.
Warning! Minor version number mismatch.
Did you ever find any resolution? I'll keep looking & if I find something, I'll post it here.
Thanks-
[email protected] -
HT5538 Inncorrect iMessage/face time phone number
My iMessage/face time phone number belongs to another family member, how do I adjust it to be my number? I have confirmed my number is the number associated with my Apple ID
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
HT204380 changing face time phone number
How do I change my Face Time phone number?
Hi stagehand74,
The information below explains how Facetime works with your iPhone telephone number, and how to change the Facetime settings:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
With iOS 6, your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices with iOS 6 and on Macs with OS X v10.8.2 or later.
In FaceTime, choose FaceTime > Preferences. Your contact preferences should display under "You can be reached for calls at:".
How to unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone. Sign out in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages.
If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Hope this information helps ...
- Judy -
3750-PoE bricked - Magic number mismatch?
Hi,
I have a 3750 PoE which I was trying to get the image off by doing a archive upload-sw...... but as it got to the image file it said the file/device was busy and gave up.
I executed the reload command and since then I've had this error message which doesn't allow the switch to boot its IOS:
switch: boot
Loading "flash:c3750-i5-mz.121-19.EA1c/c3750-i5-mz.121-19.EA1c.bin"...flash:c375
0-i5-mz.121-19.EA1c/c3750-i5-mz.121-19.EA1c.bin: magic number mismatch: bad mzip
file
Error loading "flash:c3750-i5-mz.121-19.EA1c/c3750-i5-mz.121-19.EA1c.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:Need to add some more info..
My options:
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
-- MORE --
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:
dir of the flash:
switch: dir flash:
Directory of flash:/
2 -rwx 5 private-config.text
3 -rwx 2413 config.text.renamed
4 -rwx 5 private-config.text.renamed
5 drwx 192 c3750-i5-mz.121-19.EA1c
85 -rwx 616 vlan.dat
87 -rwx 2178 config.text
9960448 bytes available (6038528 bytes used)
switch:
Can anyone tell me how I can get this booting again? I can't see any options to download code to correct this like I would using ROMMON.
Cheers. -
Material Product number mismatch
Hi
I have downloaded material from ECC into CRM, but the number of entries shown in 2 systems are different. After initial download entries were same..but over the past few weeks entries mismatch had happened. I tried to synchronise by using synchronization requests, R3AR2 etc.
Now there are 2 entries extra in CRM system then ECC. There are around 38000 records so i cannot check manually.
Please help me in resolving this.
Thanx in advance
Regards
HitsWhile it doesn't appear that the HP 500-210ix / F7F73AA has activate support pages, the computer does indeed exist on the HP Partsurfer page. This is a valid HP product for sale in your market.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
TS4185 Wrong Face Time Phone Number
Just download 6.1 on my I Pad 2 ,my wife I Phone 4 phone number is on my Face Time on iPad 2. Would like to change to my phone. Help please.
Hi stagehand74,
The information below explains how Facetime works with your iPhone telephone number, and how to change the Facetime settings:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
With iOS 6, your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices with iOS 6 and on Macs with OS X v10.8.2 or later.
In FaceTime, choose FaceTime > Preferences. Your contact preferences should display under "You can be reached for calls at:".
How to unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone. Sign out in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages.
If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Hope this information helps ...
- Judy -
Customer Correspondence Telephone Number Mismatch
Dear All,
We have generating Customer Open item list from FBL5N, The one which is generating with correct Telephone number and the one which is going through fax to customer is showing incorrectly.
Could you please help me with that.
Thanks,
Hari.Hi Anil,
Thanks for your response.
The correspondence goes from f.27 automatically and one we generate in system it showing correct number and one which is going to customer it's showing incorrect number.
I don't think so that we need to do change something from FBZP since this was a customer correspondence.
Could you please advice.
Thanks,
Hari. -
User Profile number mismatch between two identical farms
I've created a secondary High Availability farm with, I believe, all of the same User Profile settings as the primary farm.
The primary shows:
Number of User Profiles 3,428
Secondary:
Number of User Profiles 3,363
Any recommendations on how to compare these results in a way that will establish why there is a discrepancy?
Thanks,
ScottHow long has the primary farm been running? My first thought is you may have some orphaned (old) profiles from users who no longer have accounts and maybe haven't been completed cleaned up.
Another thought: Are you syncing the same OUs in both farms?
Do you have multiple authentication stores (Active Directory and a custom FBA provider for example)?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
PO Revision Number mismatch between two systems
Hello ,
We are using the PRISM product integrated with OCI to Oracle Financials. Most of the POs gets generated from PRISM and flows thru OCI to the Oracle Purchasing module. We have a customization developed on the Oracle Purchasing side, which allows to update the PO ( Using the Oracle standard CANCEL API) on certain conditions. All such POs which have been updated in the Oracle Purchasing side are in out of SYNC with the PRISM POs. The Setup option "Archive On" was set to "Approval" and will be increasing the revision number and archives the versions to the standard Archive tables. Thus a document with 2 shipment lines (Revision 0) after the above said modifications will become revision 2 and PRISM still looks for Revision 0.
Is there a quick way to deal with this situation, to maintain the archival history and to make both the products in SYNC. Increasing the PRISM version number to match with the Oracle POs version number is ruled out as it is more cumbersome.
Can we manipulate the revision_num fields in PO main tables and in the PO Archive tables? What adverse affects we have if we change these versions ? Kindly advice.
Thanks & Regards,
Kiran KesariHow long has the primary farm been running? My first thought is you may have some orphaned (old) profiles from users who no longer have accounts and maybe haven't been completed cleaned up.
Another thought: Are you syncing the same OUs in both farms?
Do you have multiple authentication stores (Active Directory and a custom FBA provider for example)?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
Stock & serial number mismatch
Dear all,
Please go through following:
Stock in MMBE 205
serial no in IQ09 206
Physically found 206
We are using production order .
Can you please guide me how to resolve this issue.
Regards,
Satyasatyasappp wrote:
Dear all,
> Please go through following:
> Stock in MMBE 205
> serial no in IQ09 206
> Physically found 206
>
> We are using production order .
>
>
> Can you please guide me how to resolve this issue.
>
> Regards,
> Satya
Hi Satya,
If you are in productive system and has ensured that all the goods movement postings have been correct with respect to stock and serial numbers, you have to reassure the GR and GI and run a physical inventory to correct the mismatch.
Shiva -
Hi,
I own an Apple iPhone 4S.Its been almost 11 months that I’ve been using the phone but recently I’ve been a facing a problem. It’s like when I charged my phone it showed only 1% of the battery and the other day it switched off. I tried charging it again but the phone didn’t start up. So the very next day I took the phone to an authorized apple service centre (RSGi InfoTech).They took my phone and sent it to testing. Then the next day they called me to collect my phone saying that my phone is ready. On the very same day I went to collect my phone but the RSGi representative told me that they couldn’t repair my phone as my phone’s IMEI number did not match with that of the number in the SIM track and the phone is not brought from India, it’s from UK.I showed them my invoice which states that I’ve purchased the phone from Croma .But they said they are helpless they can’t do anything on this.See if http://support.apple.com/kb/TS1559 helps.
Maybe you are looking for
-
I bought a Canon refurbished x3i from Canon last Summer after my Ritz Camera extended warranty became useless and my xTi (400D) died. The camera has been excellent until very recently. About a week or so ago, the autofocus stopped working. I think it
-
Leave request in Web Dynpro Abap - team Calendar
Dear Guru's We are upgrading SAP from V4.7 to ECC 6 and have activated ESS Web dynpro ABAP for the leave request. We have activated the Business Function HCM_ESS_WDA_1 Time management module all the configuration is done. ESS configuration on the nod
-
Using PSE 9 on my secondary computer
using my PSE 9 on secondary computer as allowed by you....now getting a message to provide another S/N....Please make ikt go away otr tell me how
-
2 days ago my FF3.6.3 started becoming extremely slow/delayed on EVERYTHING/ALL ACTIONS (I have been using 3.6.3 for a few months with NO problems, until 2 days ago). Scrolling going in delayed/slow/jerky 'waves' motion (not smooth & fast), Right-cli
-
just saw this......... http://www.symbian-freak.com/news/008/02/16_gigabyte_microsdhc_cards_on_the_way.htm