Faces not auto-detecting

Faces frequently fails to auto-detect faces in photos. I have several pictures where the initial scan produces no faces to be named, even when the faces in the pictures are front-on and unobscured.
On the other hand, I frequently get 'faces' auto-detected on things like peoples arms, legs, speaker grills, etc.
Is this an indication of a problem with Faces, or is it par for the course?
Thanks!

Thanks, that was what I was afraid of. In general, Faces is excellent. As you said though, it is far from perfect.
Dan

Similar Messages

Not auto detecting wifi out of clamshell mode

I have a MacBook Air and when opening my laptop out of clamshell mode my wifi will not auto detect the closest connection point. The current work around is to right click and select the appropriate connection. While this is ok, I would really like the auto detect to work properly.
I do have the automatic find selected in Network Preferences.
Looking for any solutions.
Thanks.

noelani72 wrote:
I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
Message was edited by: noelani72
Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
Good luck.

My computer will not auto-detect my shuffle

Got shuffles for my kids for easter, plued one in and had o problems downloading songs to it. The next shuffle that we pluged into our smae computer will not auto detect. Computer says it is hooked up but nothing comes up on itunes? Anyone have any ideas

Take a look at this article
http://support.apple.com/kb/TS1493
and see if changing the drive letter of one of the iPod resolved the problem.

HELP! BIOS not auto detecting

Well have my new MSI P965NeoF V2. With the Intel E7200 and a G7200 Nvidia card.. 2 gigs of memory.
The problem I am having is , the system will not auto detect the Maxtor 80 Gig or my Quantem DVD player in BIOS. It will detect both of them and actually boot from the Maxtor.. But the xp version I have on the system is bad, so I will have to restore....
The system will not "See" or acknowledge my dvd payer with the xp cd in it...
Have tried running a 98 boot disc to try and get access to the DVD , have changed the DVD to a CD rom drive I had laying around... Nothing seems to work.. What is up?
both these drives are the IDE drives. I have disabled the SATA functions for now. (In the future will get SATA Devices)
Cabling and jumper settings are correct..
SO what do I do?
Corey

Do/did you have HDD on primary IDE and ODD on secondary IDE? How old are the ribbon cables? If they have been taken off & put back in too many times you may need to use new ones. I have had to replace them in the past for that reason as they ended up being no good after too many times in & out. And yes I would get SATA HDD. I'm not sure about yours but most of the older MBs won't suppoert SATA ODDs.

MFEFX1 not auto-detected on SLM224P-G5

I have been fighting with a pair of Linksys switches, on and off over the past days. What I want to do is very simple, uplink two swtiches via a Fiber connection.
I have been supplied with equipment, which on paper is compatible, but in reality seems incompatible.
I have:
- 2 x MFEFX1
- 1 x SLM224P-G5
- 1 x SRW224G4
- (also a SRW224P - aparently after some digging listed as incompatible with the MFEFX1)
I have upgrade the firmware on the SRW224G4 to 1.2.2b to support the MFEFX1.
I have Firmware 1.0.1 on the SLM224P, listed as auto-detecting the MFEFX1.
According to the (now seemingly unavalable) document: "Linksys100M-SFP-SwitchSupport-noteV1.3.pdf" all the above should now be supported.
I have updated the port configuration on the SRW224G4, and this shows "100M-ComboF" and seems to be OK.
On the SLM224P, however, I see the port as a "1000M-ComboF" and the link stays down.
I see a led light-up on the SRW224G4 for the connection, but nothing else.
At this point I wish that I was supplied with the Gigabit Fiber modules that seem to be more compatible with the various switches (including our SRW224P - that detects the MFEFX1 as a 1000M-ComboF device. I tried this before finding the above 'compatibility' document).
Can anyone supply me with some information so that I can get this fiber connection working? Trying to set any options on the SLM224P to tell it to use only a 100M connection gives an error about this being a 1G port and so can only run a 1G speed.
Thanks for any help

aponikikay, thanks for the feedback.
The document linked is the quick-start guide that came printed with the miniGBIC. I did see that list. It looks like the other document (Linksys100M-SFP-SwitchSupport-noteV1.3.pdf) might not be so acurate.
I am going to have the SLM switch replaced by a SRW224G4P that is listed as supported. I just wonder why I was supplied with the one set of equipment in the first place...

IBook not auto-detecting my external displays any more

I have an iBook G4 which has recently stopped auto-detecting the addition or removal of external displays (both tv and my external monitor). Forcing detection using the system preferences still works. Anyone have any ideas as to how I might fix this problem?
Thanks

Plug the drive into your computer
Open Macintosh HD > Applications > Utilities > Disk Utility
Click on your drive on the left side of the window and then click Repair Disk at the lower right hand corner of the main window
It may take 30-45 minutes for this to complete. Then try the drive again at the USB port of the AirPort Extreme. Be sure to power everything off when you do this and restart things one at a time.
If that does not help, your last resort is to plug the drive into your computer again and open Disk Utility again. This time click Repair Disk Permissions. Then try again.
Are you trying to use Time Machine with the drive attached to the USB port on the AirPort Extreme?
Message was edited by: Bob Timmons

Firewire/1394 devices are not auto-detected with k8n neo4 platinum

I am unable to detect firewire/1394 devices to my PC through my K8N Neo4 Platinum. That is, I plug in the device through the firewire port and windows doesn't detect that a device has been plugged in.
I have tried:
-2 firewire devices, both are Canon digital camcorders (ZR10 and ZR25MC)
-2 different firewire cables
-reinstalling windows, got all windows updates except
(Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520))
-patch from microsoft, discussed here
(https://forum-en.msi.com/index.php?topic=81749.0)
-both firewire devices using both cables connect just fine to a test computer
-both my computer and the test computer have Windows XP Pro SP2
Windows doesn't make the noise "bah-dum" that it has detected a device, nor does it display the dialog that gives me options of what programs to use. Once in a while, if I leave it connected for a while and come back, windows will eventually find it...or windows might bog down and get really slow. It speeds up again instantly once I unplug the firewire device. Strange, I know. Also there are NO conflicts in device manager.
Could it be?:
-bios misconfiguration
-need to use an older chipset driver (i am using most recent from nvidia.com)
-onboard audio or front audio needs to be disabled
-the k8n neo4 platinum simply has connection problems with some firewire devices
(i hope not)
Bob

Built2Last: (good questions!)
I tried your suggestion by removing PCI cards and made FURTHER progress. I found out that my firewire card, the Syba NEC1394-P3, has some compatibility issues with my other PCI cards. I found this out because:
1. it worked fine after I placed it in a non-comm (orange) slot and removed my soundcard (X-Fi) and Belkin wireless modem, and
2. a tech support representative from Syba told me that that particular firewire card has compatibility issues
Quote
Also, SD-NEC-4F is our older model firewire card.
Our new firewire card (SD-PCI-4F) is using VIA VT6306 chipset and no customer complain about any installation issue so far.
If the SD-NEC-4F still giving you trouble, I'll suggest you to return it and exchange for the SD-PCI-4F firewire card.
At least he is honest and wants to help, so I remain impartial towards Syba.
So I figured out the firewire card, but not the onboard firewire. Ok, but check this out! When the Syba card was working, I could plug in BOTH the external hard drive AND either of the Canon camcorders to the Syba firewire card. Windows all three devices just fine. Again, the onboard firewire would ONLY detect JUST the external hard drive, but would not detect either of the Canon camcorders. It seems as though the ball again is knocked back into MSI's court on this issue. Any ideas?
syar2003:
As for drivers, I checked for drivers for: onboard firewire, add-in firewire card, and Canon camcorders.
-I cannot find where there is an MSI firewire driver for my onboard firewire port. I originally guess that it was part of my chipset driver installer, but the README doesn't say anything about it. It is also not an additional download on MSI's website. But since it detects an external hard drive I figure I must already have it.
-The add-in firewire card does not have drivers. I repeat, they do not exist. The manual and Syba's website both state that drivers for the card are included all versions of Windows back to Windows 98.
-Canon's website has a driver/software download page but it also appears that drivers do not exist for the Canon camcorders.
Yes the camcorder is set to VCR mode.
Yes the IEEE1394 is correctly installed, since external hard drive connects okay.
I tried two DV cables and both are connected fine.
The camcorders do not support USB as far as I can see, and if they do, I'm not using it.

The setup not auto detect to force close or notify user close current process when install new version

I created an Project 2010 add-in and create two setup project for it the one for Project 2010 32-bit and another for 64-bit. The Add-in is loaded work fine on both project bit version. just i got an problem on 64-bit version setup.
My IDE is Visual Studio 2008.
The setups project has some settings:
DetectNewInstalledVersion: true
RemovePreviousVersions:true
My problems is:
- I create old version of Add-in setup version and install it (Version:1.0.0).
- I open Microsoft project 2010 (add-in is loaded and ready to work).
- I build a new version of add-in (Version:1.0.1, Product-Code is changed, Upgrade-Code is same as old version) and install it. Setup is complete and not notify the Project is current running and must be closed to install. the old files (myaddin.dll)
not be written by new files.
- I close Project and open again. My add-in is not changed.
The problem is not occur on 32bit version of add-in.
Please help me resolve this problem. how i can force the setup detect my component is current using by another process and must be close that process to install.

Hi phide,
The forum supports VS setup and installation. I think your issue is not about the forum. Please give me more information about your project. I will help you move your issue to the related forum.
Please your project type and programming language.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved

User Interface - auto detect does not work

I have added the jQuery Mobile User Interface with Theme 50 to an old APEX 4.1 Application.
When adding the new User Interface i checked the "auto detect" feature in the old User Interface.
"Auto detect"- Help says:
Select whether the appropriate user interface should be automatically detected. If auto-detection is enabled, the user will be redirected to the corresponding login page or home page.
When calling the Application (only with the application-id) from my nexus 4 smartphone the application does not switch to the mobile Login page.
Do i have to change any old settings or themes?
Thanks so far

You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
done i some hours.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Compressor failing: "3x should not be auto-detect at this point"

I have something that I can't seem to fix. I'm trying to render to MPEG2 but the job keeps failing with "Status: Failed - 3x should not be auto-detect at this point" error message in the status window of Batch Monitor. The logs show:
<mrk tms="273146978.300" tmt="08/28/2009 12:09:38.300" pid="278" kind="end" what="service-request" req-id="D1FA9E39-FD27-4C15-A038-A785D4C804B5:5" msg="Processing service request error: should not be auto-detect at this point"></mrk>
Weirdly enough I rendered a surround AC3 without problems earlier.
All Pro apps are completely updated but the OS is still on 10.5.8. I've trashed the Compressor preferences in my home folder and this problem occur with both rendering to (virtual) Cluster (which was trouble free up till now) and th This Computer.
Anyone have any suggestions?

I have something that I can't seem to fix. I'm trying to render to MPEG2 but the job keeps failing with "Status: Failed - 3x should not be auto-detect at this point" error message in the status window of Batch Monitor. The logs show:
<mrk tms="273146978.300" tmt="08/28/2009 12:09:38.300" pid="278" kind="end" what="service-request" req-id="D1FA9E39-FD27-4C15-A038-A785D4C804B5:5" msg="Processing service request error: should not be auto-detect at this point"></mrk>
Weirdly enough I rendered a surround AC3 without problems earlier.
All Pro apps are completely updated but the OS is still on 10.5.8. I've trashed the Compressor preferences in my home folder and this problem occur with both rendering to (virtual) Cluster (which was trouble free up till now) and th This Computer.
Anyone have any suggestions?

My outgoing mail server auto defaults to port 465 but auto detect settings box is not checked

Hi Guys,
Hope someone can help.
I am having problems sending emails as my provider does not support port 465 as an outgoing mail server port, only 587 and 25. Despite not having 'auto detect settings' box checked in mac mail my port defaults to 465 whatever I put in there.
I am running 10.10.1 and the latest version of mac mail.
Hope someone can help.
Cheers
Adrian

Hello,
I figured out my problem. I had somehow changed the "user name" in the outgoing server. (edit server list > Advanced tab > user name). When I corrected the user name, so that it exactly matches the user name for the "Incoming mail server" the outgoing server is back online!
Of course, I still have the problem of having to enter my keyword password repeatedly, but that is in a different thread . . .
Lincoln

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

Problem: ipod server could not be contacted, i went to control panel, lan settings, ck'd auto detect and went back to i-tune to update and got the same error message, any help is appreciated

Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221

See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.

Text Encoding (Big 5) not being auto-detected

I just had to reinstall OS X (10.4, the upgraded to 10.4.9) due to a bad crash. In Safari (2.0.4), I tried to view a particular page.
http://www.ettoday.com/
This is a Big-5 (chinese) encoded page; I have my Default Text Encoding set to Western (ISO Latin 1), and the page looks garbled when I try to view it, unless I go to View->Text Encoding->Traditional Chinese (Big 5), and then it displays correctly. My question is, why isn't this encoding being auto-detected and display correctly without manually setting it? Looking at the source, about 22 lines down there is this:
<meta http-equiv="ªF´Ë·s»D³ø" content="text/html; charset=big5">
which looks like the appropriate specification of the encoding. Can someone who has chinese fonts installed please verify this? Is this something Safari is doing wrong, or possibly something got lost in my system reinstall (to tell the truth, I can't recall specifically if this was a problem prior to my crash).
Thanks,
David

Ok, thank you. I gave up trying to understand html right around when the "blink" tag came out, and I just get paranoid every time I do a reinstall that I'm missing some critical part. I like the validator-- never knew about that.
Now, if you do a search on the source code for that ETToday page, somewhere far down you'll come to another section that reads:
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=big5">
blah blah blah
This does appear to be properly formatted, and maybe it's there specficially for English-default browsers. However, perhaps neither Safari nor the validator are picking up this, or maybe it's referring to something else altogether?
thanks,
dave

Faces not auto-detecting

Similar Messages

Maybe you are looking for