Faces not saving after manually adding them
This may be a common problem, but after I add a face, it doesn't save. Everytime I manually add a face, it doesn't save it. Sometimes it will move the face from the previous photo to the next in the place of the previous picture. Anyone have any ideas about this? Of course I realized it after I spent 3 hours adding faces to 28,000 pictures.
iPhoto menu -> Provide iPhoto Feedback
What's happening is that iPhoto scans the photos on import and doesn't rescan them after you crop. What happens if you force it to rescan?
Regards
TD
Similar Messages
-
I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
Hello,
I'm very frustrated. I need to delete photos from my iphone to increase the storage so I can update the operating system. Since first using the phone I bought extra iCloud storage and ensured the photo streaming button for the iCloud was turned on.
Unfortunately it seems to have a mind of its own and will download and share some photos but the majority have not been downloaded.
I've resorted to manually putting them on photo stream (the one you share with friends) so the photos will be on my iPad. It also takes ages for my iphone to put them on the photo stream. It's downloaded one album x3 ..??!!? I've tried deleting the duplicated photos but it's now frozen on me....
I haven't dared delete the photos from my camera roll in case I loose them all and I'm therefore stuck in the situation of being unable to download the new operating system or take anymore photos/download music/apps. It *****!
Please Help!
Are there any other options for me to be able to download my photos when I don't have a computer/laptop? Is there a permanent online storage option I can use?
Thanks
BeckyAmazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
Hierarchy Data not saved after Hierarchy Load
Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
AbhishekAbhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks -
AP workflow comments not saved after posting
dear
Ive posted it in controlling forum, but it had to be rather here.
I
when i check SAP AP workflow document overview id like to see comments entered by accountant as the reason for document parking. as soon as the document gets posted i see the approval and coding workflow path but comments are not saved any longer. do you know what might be a reason for that? why it happens? maybe it is related to specific settings for workflow?
workflow log for the posted docs is neither showing this information.
your advice much appreciated.
thank you very much!
regards
elsthank you for trying to help me.
Well, it looks this way: invoice is parked as PO document via workflow and send for approval - for different reasons (price difference, no GR, any PO found etc). Accountant while parking enters comment - to inform approver about the issue.
Sometimes the invoices bounces back already coded and ready for posting, sometimes is rejected - then we have 2nd comment as the reason for rejection. When finally invoice is ready for posting and is posted - these all comments (for parking, for posting) are disappearing. They are not saved in workflow overview history.
The posting might be done manually via workflow, automatically, or via tcode to post parked doc. But in anyway - comments are not saved. I am sure its possible to review invoice workflow history (if appicable) and see the issues identified for that invoice (audit purposes for instance). But I dont know how to check what should be set up for the workflow to have all these comments saved in workflow overview history (not long text, not WF log).
When i.e. you enter WF overview history you see name and action (park, reject etc) - when was clicking on that line it was seen below the screen the comment.
Thank you very much for your help!
regards
els -
ITunes preferences not saved after logging out.
iTunes preferences not saved when logging out. Using iTunes11.0.4.4 Preferences are not saved when logging back in. Is this a bug or is there a file or registry key I need to fix?
ThanksHello JK,
If you used Mac's automatic Software Update... to get to 10.5.1, try this:
• Repair permissions.
• Download and install the Mac OS X 10.5.1 Update.
• Repair permissions again after the restart that completes the install.
• Test to see if problem is still there.
If problem exists, try suggestions relevant to your system from Apple's How to Troubleshoot iSight.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight -
Desktop setting not saving after system update
Hi All,
I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
not saving my desktop setting. I have the "automatically save session on logout" check.
I am using xfce4 as my DM
any help please.hi,
check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files -
Artist names won't update on iPod after manually correcting them
Ever since updating to iOS 5 my artist names are no longer consistent. Some entries will read Smashing Pumpkins and some read The Smashing Pumpkins for example. Originally I manually changed them to be consistent as they appear in iTunes and on the iPod in iTun es when connected. However, once disconnected the iPod itself goes back to displaying them as seperate entries. This is extremely annoying.
I'm having the same problem, along with a lot of other people. This is ridiculous.
-
VPN settings not saved after upgrading ipad
I got an ipad mini so I did a backup of my ipad 3 and restored that copy to the ipad mini.
Everything was restored ok with the exception of my VPN settings, it's a VPN from work and now I can only access that network from my ipad 3, not form ipad mini.
Please helpI'm having the same problem too. I backed up my iPad 3 settings and downloaded to my iPad mini, now the exchange email settings won't save.
The credentials are exactly the same as my iPhone, bit it keeps giving the message 'unable to verify account information'
Anyone else having this issue with the iPad mini not saving settings? -
Why all my new notes doc are missing for some time after I added them.
This happens after I changed my iphone4 to iphone5.
All my old notes doc are still there, only those new ones that I've added will only stay for couple of days/wks in my iphone5 then will be gone.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.
-
Lightroom 5.4 changes not saved after touching up in Photoshop CS6
I'm using Photoshop 5.4 and Photoshop CS6, licensed via CC. My workflow includes Lightroom edits that apply to an entire group of photos (white balance, colors, lens corrections, etc.) followed by an individual export to Photoshop CS6 using the Edit in Photoshop menu option. Once opened in Photoshop, the changes in Lightroom appear to be applied. After applying some manual touch ups to the photo, then saving, the resulting .tiff file loses the Lightroom edits. The original .nef file contains the Lightroom edits, but not the touch ups; the .tiff file contains the touch ups but not the Lightroom corrections.
How do I resolve this?In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which. -
Photos missing after manually sorting them.
After moving photos from camera roll to iTunes image-sync folder, some images will not resync to my phone. I do not use iPhoto. Pictures was taken by the iPhone 4. Help?
I have a folder on my computer where from iTunes Autosync images. I use this to be able to sort my images into folders/albums without using iPhoto. However after doing this not all of the photos taken by the iPhone 4 will resync to the iPhone and I cannot figgure out why.When you copied them to the flash drive you took them out of iPhoto and into the Finder. The Finder doesn't understand manual sorting.
Here's one (of several) way(s) to do what you want:
Make an Album of the photos, then drag the pics into your preferred order.
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto. -
Changes to Excel link sources are not saved after closing the workbook
We've had several instances over the last few weeks where users are updating the source files for various links within a spreadsheet, saving their changes and closing the file. Then, next time another user goes into the file, the links have reverted back
to their previous values, as if the first user never went in and changed them.
Anyone ever hear of such a thing? The user changing the links is running Excel 2013. The user opening the file for review is using Excel 2010. Could there be some issue there?
ShaunHi,
According to your description, let us more test to narrow down this issue.
Firstly, since the three users using different pc to open these file, I recommend the third user logon the other two PC with Excel 2013 to test.
If third user could see the well file with Excel 2013, this issue is more relate to Excel 2010 or the third PC itself.
Secondly, we could use the forth pc with Excel 2010 to test. If third user could see the well file in the forth pc with Excel 2010.
I'd better check the third PC itself. There are some third party add-ins or program will caused it. Try following methods:
Install the Windows and Office 2010 update patches.
Start with Excel safe mode.
If it still not work well with Excel 2010, there might be some compatibility issue between Excel 2010 and Excel 2013. Please try to run
the Compatibility Checker for 2010
Hope it's helpful.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
Where are my videos? Ipad videos not saving after long recording time.
I have been trying to set my ipad up as a surveillance camera to observe animal activity at night at my zoo. However, after letting the video app record for an hour or more, it shows that I have used storage space, but the video is not in my photos/videos folder. I am using the light boost app, and it appears to be recording properly. I have successfully recorded videos 10 mins in length, but if I let it run for a long period of time, the videos do not appear.
Is there a limitation on the recording length? Why would it show the app has used up all my memory when the videos are not being saved? Or are they being saved in some mysterious place?
Additionally, does anyone know of a better way to do this? I have a very limited budget, and am trying to avoid buying expensive surveillance equipment or video cameras.
ThanksAccording to Light Boost the videos are being stored in the Photos - Camera Roll to which you must give access permission see Settings > Privacy. Permission to use the microphone is also necessary.
If you are having problems contact Light Boost for help.
From the Light Boost website:
Please contact us via twitter (@lightboost) or email, we’re here to help. -
Camera video not saved after installing 8.02 on iPhone6
Videos were being saved prior to installing the last update.
Video and slow-mo ARE NOT being saved to "Photos App" either in "Collections" or "Albums->Videos" after the update.
Photos are being saved.
I tried a "Home/Power Button" reset and a full reset in setting (erase all content and settings) followed by restoring from backup.
Still broken!
Why else can I try?Product updates
Maybe you are looking for
-
I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.
-
Limited Export Functionality in PSE 7
Hello Everyone: I just recently purchased PSE 7 to take advantage of its wide array of capabilities to organize my thousands of photos. I have been really impressed with its many features and started my foray into using the software by organizing an
-
Items[i].getElementsByTagName("a")[0] has no properties
Hello, I am using the Spry MenuBar on this website http://sfb0904.web.aplus.net/index.php However, the "submenu" items for the "downloads" link doesn't seem to work on this page. It does however work on the other link(the about link on the home page)
-
Script to query DHCP server for computer name if IP address is known
I run vulnerability scans of my company's network. After scanning my network I have a lists of IP addresses with no computer names. Most of them appear to be VTC or telephony systems so they are don't respond to NBTSTAT. I can manually find them in m
-
Optical Audio Out on Apple TV v3
I just got my new Apple TV v3 yesterday and hooked it all up. I have it hooked directly to a Panisonic plasma via HDMI and my Sony AV receiver via optical audio cord. I also have a connection from my optical out on my TV to the optical in on the re