Faces - Reading, re-scanning?

I opened iPhoto initially and ran the Faces scan, it it came back with zero faces recognized. I have gone through and assigned the names to many faces and photos - with most people having at least ten photos. How do I tell it to re-scan my album? When does it automatically start recognizing faces? I saw another post by a gentleman with a similar problem - I don't want to have to add my wife's tag 200+ times (not that she isn't worth that effort - HA!).
Help?

Ryan Williams6 wrote:
When does it automatically start recognizing faces?
Seems that it does it all the time. But it will only suggest that it thinks a face is that of a particular person and wants you to confirm that suggestion. This is made easier through the 'face album' for anyone you have tagged. You click on their picture in the 'faces source', and after the 10 or so photos you've tagged will be suggestions. You can confirm or 'un-confirm' these suggestions. Each time you do this it gets better and suggests more faces.

Similar Messages

Read Verify Scan Weird result "11ror!"

Had some problems with my ipod for no real reason, never droped or anything, but the other day stopped responding totally. After leaving it on charge over night managed to at least to get it to show sad ipod face, or sometimes the folder icon. After about 40 trys managed to get it into diagnostic mode. Ran the Read Verify Scan in th IO harddrive option, and it returned the result of 11ror!. I am guessing that this basically means the harddrive is screwed. The computer wont even recognise that it is attached at all.
Rich

The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

Read Verify Scan issue

I've been havings some problems, so I decided to go through the diagnostics. I am now at Read Verify Scan screen for HDScan test, and it says "Start Scan....". Its been sitting there for a long time! How long does this take? I've tried hitting the Select, but nothing happens?!

I've been havings some problems, so I decided to go through the diagnostics. I am now at Read Verify Scan screen for HDScan test, and it says "Start Scan....". Its been sitting there for a long time! How long does this take? I've tried hitting the Select, but nothing happens?!

Reading something scanned sideways, how do I get the iPad to let me read without turning it sideways when I turn the iPad sideways?

How I get the screen to staty put if I turn it to read a scanned document?

You can use the rotation lock.
There's a little switch under the volume rocker. It can be an all mute or a rotation lock. Flip it and if you see a little padlock with a circle around it, you've locked the rotation and can turn the screen as much as you want without it righting itself.
If you don't get the rotation lock, go into settings, general and you can change that switch from all mute to rotation lock.

I NEED HELP!*weird menu setup thing white screen"read verify scan"*

basically...my dad had to delete everything off the computer and install everything back on again. i installed itunes, and the ipod setup thingy u have to do. when i plugged my ipod in and switched it on it came up with a white screen with a menu on it i havent seen before. i started setting my ipod up throuh the menu, and it has now reached a screen and at the top it says "Read Verify Scan scan takes a while" below that it says:
Battery Check
Volts=508
Level=10
Charge Ok !
3999488
99%
it has been on this screen for a while now. i cant switch it off, and if i unplug it the volts and level number decreases. should i leave it plugged in or unplug it, or what else should i do?? i hope you can help me with this problem.

Here:
http://www.apple.com/ipod/specs.html
Video
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per sec., Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats

Read Verify Scan Message on Screen

I started my ipod this morning and got some kind of diagnostic screen, which I tried to negotiate through and now it is completely locked up and says:
Read Verify Scan
Scan takes a while
Battery Check
Volts=476
Level=10
Canceled
MENU to continue
Although pressing menu does nothing and plugging into the computer, it's not recognized. Does anybody know what this screen means?

yes, it means u are in diagnostic mode. I think because u canceled it, it may have frozen up. Try holding menu and center for 6-10 seconds. post back

Faces Read-Only Table control - reset column sorting?

In an ADF Faces Read-Only Table control at runtime, once the user has clicked on a column to resort the table entries based on the clicked column, is there any way to unclear the sort?
CM.

In an ADF Faces Read-Only Table control at runtime, once the user has clicked on a column to resort the table entries based on the clicked column, is there any way to unclear the sort?
CM.

Who can tell me how to stop the face reading program? I don´t want to have it on my Mac

I want to stop the face reading programm on my Mac. I would like to delete it. Thank you!

Exactly what face reading program are you talking about? Did you download and install it?
Also, please furnish relevant information: Mac model/year.

Nano stuck on error msg: Read Verify Scan

I may have posted my original post in the wrong thread, so I thought I'd post here.
I turned on my iPod Nano and have some sort of a frozen scan screen that is at 0%. It has this information on the screen:
Scan takes a while (all day now is a little too long I'd say :D)
Battery check
Volts=478
Level=10
Charge OK !
Canceled
0%
Tried to reset, but screen is frozen in this scan position
Tried turning off or on - screen frozen
Tried hold on and off - screen frozen
Tried the update:
I thought maybe an update would get things moving along, but when I connect to my PC I don't get the connection logo, and the iPod just remains in the frozen scan state, a scan this is not working anyway.
IN other words, I have a frozen error message and I can't do anything with the iPod.
Anyone ever have this problem?
And it's not like it's never been connected - it has - and I've never had any problems. This is the first.
Sony Vaio Windows XP Pro

As I mentioned in my original post:
Tried to reset, but screen is frozen in this scan position
Tried turning off or on - screen frozen
Tried hold on and off - screen frozen
Tried the update
Tried restore
Tried connecting to PC
But nothing will budge that error message on the screen. Looks like it's a major technical problem with the iPod Nano.
Sigh.............

Read barcode scan without textbox focus

I have 16+ scanners coming into the computer from a single USB port. The code that I have now works fine as long as the textbox has focus. What I want is some code that I could use that would get the scan even if the windows form is minimized
or some other program is being used.
I've looked around a lot and everything just says to have focus on the textbox. Is there like a barcode listener that I could use?

Hi saprest,
When you have focus in a testbox, it sends characters to the textbox as if you typed them from the keyboard. If you don’t want to use a testbox, you would subscribe to a keyboard event handler to capture the barcode stream.
The links below might be useful to you:
# get barcode reader value form background monitoring
http://stackoverflow.com/questions/10850050/get-barcode-reader-value-form-background-monitoring
# How can I read barcodes without having the user focus a text box first?
http://stackoverflow.com/questions/2688493/how-can-i-read-barcodes-without-having-the-user-focus-a-text-box-first
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

During continuous scanning thermocouples with a SCXI 1120 module is the cjc reference read each scan?

Did the developers of the DAQmx drivers improve the temperature scan capability of the SXCI 1120 module over the methods used in the traditional drivers?
When using the SCXI 1120 module for temperature measurement and in the continuous scan mode with traditional drivers the cold junction reference was only checked on the initial start of the scan. In order to maintain accuracy it was necessary to restart the scan.
For the most part I have switched to the 1125 module for thermocouple measurement but I need to use some 1120 modules on a test stand now and I will be using the DAQmx drivers on these. I was in hopes that with the DAQmx drivers this behavior was corrected.
I can conduct testing to determine this but would like to know ahead of time if this is still an issue.
Thanks

Thank you Ben for the answer.
I checked the article you referenced appears to me that I will be adding the physical address in the channel strings then do the voltage to temperature conversion and then correct the appropriate channels associated with the cjc in question. I will also need to adjust some on board jumpers for the SCXI 1120. If I am wrong please correct me.
If scanning the physical channel is possible as suggested in this article, would it not be possible to create the channel as a virtual global channel and reference it as the cold junction in Max? Then the temperature adjustment could be done at this level of acquisition rather than having to sort this out in the LabVIEW program. This takes me back to the days with LabVIEW 4.0 before we had the virtual channels and when we had to handle the temperature conversions and other scaling ourselves. Again if I am incorrect please let me know, for I would like to use the method recommended in the article if I don't have to perform all the calculations in the application.
Just wondering if anybody reading this has actually used this method. If so, how did it work for you?
I may end up building a start up routine testing for 1120 modules being used for thermocouple measurement then if found run a stop and restart scan every 5 minutes to prevent large errors from being introduced.

An app that can read CT Scan(s) data

Hi -
I had some CT scans done and when I asked if I could see the images, they simply gave me 3 disks. When I asked what type of file they were (i.e., JPEG images, PDFs, etc.) and if I needed a 3rd party app to view them -- AND if so, if they were exclusively for the Windows platform — the technician sounded clueless. He just said, "you just pop the disk into your computer and it should read them."
I told him about the platform differential ("I use a Mac") and he sort of mumbled something which told me he didn't know.
As I feared, as soon as I got home and popped in the disk on my iMac, I saw all these "autorun.bat" and ".exe" file extensions. So when I opened the Readme files, sure enough...WindowsLand.
I Googled "+how to view CT scan data images on a Macintosh+" and found a couple of apps, but none of them worked.
Does anyone know of a plug-in or an application that can read these files? There are so many (under numerous subfolders), that I don't even know which one to open.
Thanks.
Message was edited by: RuskinRules

HI,
You need a medical specific software to read those files with. I discovered this myself. My partner needed c-scans which he did but everytime we went to see another specialist, we had to wait for the original scans to be sent to the new doctor. Instead, they burned those files to a CD and even though I could not read them on my Mac, I was able to upload them to my iPod. That way anytime we visited another doctor, all they had to do was download the scans to their computer from my iPod (firewire). Doesn't matter if they are .exe or not, you can still use an iPod or possibly a flash drive for convenient storage. It saved time and money.
Since you have the files, at least you have them for future use.
Even if you could find that software, it would be really expensive.
Carolyn

2 questions - I have downloaded the PDF Reader - Annotate, Scan , Fill Forms and Take Notes app to m

When I fill out a form within this app and email it out the recipient receives a blank form, I looked in the manual and it says make sure you complete the saving process, but cannot seem to figure that part out.
Also, these are forms I will be using on a daily basis and do not want to make permanent changes to the form, is this possible? Or will I need to create several copies of the form?
Please help, as this is time sensitive subject.

Can you please tell us what the recipient is using to view the PDF? Many viewers don't support viewing filled PDF forms and the recipient will need to use a PDF viewer like the Adobe Reader to view the form.
You can make a copy of your form like this:
In the file browser under Documents view, you should see an Edit button. Tap the edit button.
Tap the file you want to copy
Tap the duplicate/move button (two small documents at the bottom of the screen)
Tap Duplicate
That creates a duplicate copy of the document. You can then use the edit button to rename if you would like.

Read Verify Scan

What is this??? My husband turned it on and this is what it says. It now says...Battery Check
Volts=456
Level=9
Charge Ok!
Canceled
MENU to continue
Well, I press menu and nothing happens. I have tried everything I know how to. Help a sister out!

See this.
How to reset the iPod.
It may take quite a few attempts and is best done connected to power.

Cannot read a scanned file

I scan a file on my hp photosmart, to PDF, send tmy laptop and try to open with adobe. I get a file corrupted message. I can open the pdf with nitro pro. WHAT GIVES, CAN ANYONE HELP?

This is a copy of the file I cannot open.
Joe Peterson
[email address removed]
Sent from Windows Mail
Message was edited by: MetroDevCK

Faces - Reading, re-scanning?

Similar Messages

Maybe you are looking for