Facetime between old and new devices

I am trying to call my iPod Touch 4G with my iPod Touch 5G's facetime. Reverse way, it works but this way no connection. Again, from 4G to 5G no facetime connection. How can i fix it?

What exactly happens when you try the unsuccessful way?
If you go to Settings>messages>Send and Receive on both devices do the devices have comm email addresses/phone numbers?
It could be that based on the Contact information you are tying to FT the same email address/phne number that is on both devices. You can't call yourself. The email address/phone number called is based on what is in the sender's Contact entry.

Similar Messages

WDS between old and new AEBS

First I want to apologize for this lenghty post. I want to provide as much useful info as possible. We just bought the new AEBS Dual Band and tried to add it to our existing WDS network and ran into a few serious snags. I really hope we can find help here. I've already spent many hours pouring through this forum and other sites and can't find any answer. Here's what our existing network look like:
Gigabit AEBS N as WDS Main > 2 "G" AXs as WDS Remotes
Wireless clients include: Tivo (G), MacBook (N), 2 iPhones (G), iBook G3 (B).
Wired clients include: Tivo HD, PowerMac G5, Mac mini, laser printer
What we were trying to accomplish is to make the new Dual Band AEBS as the new WDS Main and create 2 (connected) WiFi networks via WDS:
N network (5GHz) > Dual Band AEBS as WDS Main > Gigabit AEBS N as WDS Remote
G Network (2.4GHz) > 2 "G" AX as WDS Remotes
We want to do this so the Gigabit AEBS N can live in our living room and allow the Tivo to have decent speed when we download the shows to the Macs or to transfer between the Tivos. Since the Dual Band is advertised as being able to broadcast on both frequencies simultaneously, we're assuming it can do this. However, I can't find any info online or otherwise that either confirms or disputes this function.
When I tried to set it up as such, the 2 AXs work as expected. But the Gigabit AEBS N becomes non-responsive. I even tried to hard reset it and re-attach it to the network using 2.4GHz to no avail. At this point, the Gigabit AEBS N either gives the -5 error or, after hard reset, fail to acknowledge the WAN port when I tried to do a "basic" setup to test it.
My first question is: Does the Dual Band AEBS support my desired configuration at all? That is, create separate WDS networks on the 2 frequencies (5GHz vs 2.4). No one I've spoken to at Apple has a clear answer. So I wonder if anyone who reads these forums has tried this.
My second question is: does the 7.4.1 firmware hose the WAN port of the Gigabit AEBS N? I've downgraded it back to 7.3.2 and the WAN port is still not recognized. The AEBS was working 100% before the swap (and the firmware update that followed).
My last question is: Has anyone experienced "stuttering" on the Dual Band AEBS? I haven't noticed it until I tried to playback some QuickTime files off the Airport Disk attached to the Dual Band. On the Gigabit AEBS N, the files all play smooth without any dropped frames (even during substantial network activities). On the Dual Band, frames were dropping every few seconds (even during an otherwise idle network load). When I look at the Airport menu (holding down Option), the Transmit Rate fluctuates between 300 and 1 every few seconds.
Does this mean I now have 2 defective AEBS? Can someone shed some light on this? We would really appreciate any help.
PS: When I take a peek in the "Wireless Clients" pane in Airport Util under the Dual Band, the Rate for the 2 AXs are hovering between 1 and 5. Does this sound right?

I am in a similar situation. I purchased a new dual-band Extreme to replace the older G spaceship with the intent of extending both bands with 2 Expresses, one a new N and other an older G. I extended the N band successfully with the N Express, but when I tried to configure the older G Express I couldn't get the dual band to recognize it when WDS was selected. When I choose "join the existing network" the dual band connected to it, but of course this didn't extend the range.
My first call to Apple Support indicated that I could only extend one or the other with an Express, and that I would have to buy a second dual band Extreme if I wanted to extend the range of both bands at the same time. I took this to mean that I would set up the 2nd unit would act as a dual remote to "extend the network." I returned the new N Express and got a second dual band Extreme, but before I opened it up I checked with another Apple "product specialist", who then told me that I could NOT use the 2nd dual band Extreme to extend both bands at the same time.....only one or the other. According to this guy I would need to hook both routers up together with an ethernet cable, then I could extend each network separately with the Expresses.
There has to be a better way to accomplish this.

What is the different between old and new succession planning?

Hi
I have worked a lot on succession planning in 4.6c. In ECC 6.0, the succession planning has shifted to e-recruitment section.
1. What is the difference between succession planning in 4.6C and ECC 6.0
2. Can I still use the old succession planning in ECC 6.0
3. Is there a requirement to transfer data from old succession planning to new succession planning if we move to ECC 6.0?
Thanks

http://java.sun.com/overview.html
I found that link in five seconds.

Difference between old and new MM?

Staying in front of dillemma. Don't know what to buy: old MacMini or new one with Intel? What is the difference between them besides speed? Is that difference so important for people who is not so big specialists? Thanks in advance for reply.

Not surprisingly, this question is being asked rather frequently at present, but it is now getting harder and harder to find G4-based minis, so it's not going to be long before there is no choice.
The Intel minis are certainly faster than the PPC versions, an in some applications it's quite noticable, though it has to be said that in the usual sort of tasks involving web browsing, email, typing etc, there's not much difference that you would expect to see. If you were planning to use iMovie, Garageband, iPhoto etc, then the Intel version would be a better bet, and certainly if you are hoping to push the system quite hard by regular and perhaps demanding tasks.
Personally, after testing a couple of Intel mini's, I'm happy with my G4 models - at least for another year or two, but in part that's because at this time some of the software I run is NOT Intel native, so it would run slower on the Intel models under emulation than it does on the G4. If you had a collection of existing software titles you wanted to run (things like Photoshop or inDesign for example) that would be a serious consideration to be taken into account in your decision, since these aren't Intel native as yet and no immediate announcement of them becoming so.
I would have to say that in my experience, for the sort of things most people use a computer, you likely would be very happy with either. Just bear in mind that the more memory the system, the better it will run anyway.

Difference between old and new Airport Express?

What is the difference between the old Airport Express and the new one? Besides the new one haveing 2 USB ports?
Here is a link to the old one: http://store.apple.com/us/product/FB321LL/A/refurbished-airport-express-base-sta tion-with-80211n-and-airtunes?afid=p219%7CGOUS&cid=AOS-US-KWG-PLA

I would suggest that you review the following sources to get an idea of the differences between these models:
Apple Support Technical Specifications
SmallNetBuilder
iFelix AirPort base station differences

IPad syncing issue between old and new computer.

I 'm trying to sync my iPad to a new computer, but it says my iPad is already synced to another library. My previous computer and data is no longer accessible. I do NOT want to lose what I have on my iPad, its a real pain and its happened before: the message says I would have to ERASE! everything to sync it. This really makes me hate iTunes. Thoughts? Help?

iPhones are not really designed to be synced, or even manually managed, with multiple computers. You should sync with a single library. Depending what you've done so far you may in fact have the same library on both computers, but if not see this tip on migrating your library.
Even when you have exactly the same iTunes library on two computers iTunes "knows" to sync the pictures from just one of them, though in my experience they have stayed on the device when syncing with the other machine. If you copy the pictures over to the new computer, then select the folder to sync photos from on the new computer they should all get added in.
tt2

Comparism between old and new MacBook Pro

Hi!
I have a first generation MacBook Pro1,1 (Core Duo Intel, 2Ghz, 2Gb RAM) and would like to know if I will gain much in oerformance if I buy a new one. Has there been any great performance improvements since my model?
Thanks!

Sitara wrote:
Hi!
I have a first generation MacBook Pro1,1 (Core Duo Intel, 2Ghz, 2Gb RAM) and would like to know if I will gain much in oerformance if I buy a new one. Has there been any great performance improvements since my model?
Thanks!
There are definitely performance gains but how much is a matter of perspective and subjective to the end user, IMHO.
There's a couple of sites you might wish to visit for more info:
http://www.barefeats.com (they offer comparisons based on performance via applications, games, between computers, etc.)
http://www.primatelabs.ca/blog/ (they offer a benchmarking app and posts their results on their blog page)
HTH.

Transfering between old and new iphones

I recently tried to transfer data from my old iphone to my new ipone4. All data was successfully transfered but none of my apps appear on my new phone. Any ideas?

You have to sync or re-download to restore your iTunes content, as none is included in any iPhone backup.

Message reference between old and new url's

as already mentioned by many others, many people have lists of links to important threads. when comparing the new id's for the same thread with the old ones, there seems to be no logic to connect them.
how can we get a way to find the message with the old url's? for me it is very important.
thanks in advance
trevi

Repost! any feedback from the OTN-team available? is the problem at least noticed??
thanks
as already mentioned by many others, many people have
lists of links to important threads. when comparing
the new id's for the same thread with the old ones,
there seems to be no logic to connect them.
how can we get a way to find the message with the old
url's? for me it is very important.
thanks in advance
trevi

Major differences between GL and New GL concepts

Hai,
Please let me know the major differences between old and new gl concepts and if possible explain with few examples....
Thanks in advance.....
Regards
Moderator: Please, read and respect SDN rules

Hi
Refer to the link below-
http://www.sap.com/solutions/business-suite/erp/financials/pdf/BWP_New_Gen_Ledger_Acct_Functions.pdf
Regards
Milind

Difference old and new transfer

I will find out the fifference between old and new transfer process.
On one hand I know the old works with update rules an inforsource and transfer rules. the new one has an transformation and a dtp.
also I know that there are update rules for direct writing and update rules for flexible writing.
direct is for hierarchies also and flexible is to change data before the target.
So my question:
I wrote that I need Update Rules when I want to write from master data while loading data into a charakter. I wonder is the name flexible update rule here used in the same way as transformation rule? or do i really have to use the old transfer 3.x?
At least the question: What is the real difference between direct or flexible update rules and a transformation?
Why can'T I load a history with a transformation and with flexible update rules? Why do I have to use direct update rules?
I would be very happy if you tell me that update rules and declaring rules in transformation means the same... but i think it is not like that..

In BI 7.0 we have DTP to load data. In transformation we have start routine, end routine and transfer routine.
You can go through these links:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=32737032
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0190221850DB00612828832805035416End?blog=/pub/wlg/6772

Question about bluetooth communication between PC and mobile device

I am a newbie of bluetooth communication. This time I need to have connumication between PC and mobile device (mainly mobile phone) by sending strings. PC is acted as server and mobile device act as client.
For using bluetooth in PC, I use bluecove 2.0.1
I have already connected them successfully.
When I want to send strings between them, it is found that it can only do one cycle of communication (client -> server -> client).
For my design, they can communicate multiple times.
I simulate the core class of the system, the performance is fine.
Cound anyone help me to watch the code and give me some advices?
Server Side - ServerBox.java
public class ServerBox implements Runnable {
   LocalDevice localDevice;
   StreamConnectionNotifier notifier;
   ServiceRecord record;
   boolean isClosed;
   ClientProcessor processor;
   CMDProcessor cmd;
   MainInterface midlet;
   private static final UUID ECHO_SERVER_UUID = new UUID(
           "F0E0D0C0B0A000908070605040302010", false);
   public ServerBox(MainInterface midlet) {
       this.midlet = midlet;
   public void run() {
       boolean isBTReady = false;
       try {
           localDevice = LocalDevice.getLocalDevice();
           if (!localDevice.setDiscoverable(DiscoveryAgent.GIAC)) {
               midlet.showInfo("Cannot set to discoverable");
               return;
           // prepare a URL to create a notifier
           StringBuffer url = new StringBuffer("btspp://");
           url.append("localhost").append(':');
           url.append(ECHO_SERVER_UUID.toString());
           url.append(";name=Echo Server");
           url.append(";authorize=false");
           // create notifier now
           notifier = (StreamConnectionNotifier) Connector.open(url.toString());
           record = localDevice.getRecord(notifier);
           isBTReady = true;
       } catch (Exception e) {
           e.printStackTrace();
       // nothing to do if no bluetooth available
       if (isBTReady) {
           midlet.showInfo("Initalization complete. Waiting for connection");
           midlet.completeInitalization();
       } else {
           midlet.showInfo("Initalization fail. Exit.");
           return;
       // produce client processor
       processor = new ClientProcessor();
       cmd = new CMDProcessor();
       // start accepting connections then
       while (!isClosed) {
           StreamConnection conn = null;
           try {
               conn = notifier.acceptAndOpen();
           } catch (IOException e) {
               // wrong client or interrupted - continue anyway
               continue;
           processor.addConnection(conn);
   // activate the set up of process
   public void publish() {
       isClosed = false;
       new Thread(this).start();
   // stop the service
   public void cancelService() {
       isClosed = true;
       midlet.showInfo("Service Terminate.");
       midlet.completeTermination();
   // inner private class for handling connection and activate connection handling
   private class ClientProcessor implements Runnable {
       private Thread processorThread;
       private Vector queue = new Vector();
       private boolean isOk = true;
       ClientProcessor() {
           processorThread = new Thread(this);
           processorThread.start();
       public void run() {
           while (!isClosed) {
               synchronized (this) {
                   if (queue.size() == 0) {
                       try {
                           // wait for new client
                           wait();
                       } catch (InterruptedException e) { }
               StreamConnection conn;
               synchronized (this) {
                   if (isClosed) {
                       return;
                   conn = (StreamConnection) queue.firstElement();
                   queue.removeElementAt(0);
                   processConnection(conn);
       // add stream connection and notify the thread
       void addConnection(StreamConnection conn) {
           synchronized (this) {
               queue.addElement(conn);
               midlet.showInfo("A connection is added.");
               notify();    // for wait() command in run()
   // receive string
   private String readInputString(StreamConnection conn) {
       String inputString = null;
       try {
           DataInputStream dis = conn.openDataInputStream();
           inputString = dis.readUTF();
           dis.close();
       } catch (Exception e) {
           e.printStackTrace();
       return inputString;
   private void sendOutputData(String outputData, StreamConnection conn) {
       try {
           DataOutputStream dos = conn.openDataOutputStream();
           dos.writeUTF(outputData);
           dos.close();
       } catch (IOException e) {
   // process connecion
   private void processConnection(StreamConnection conn) {
       String inputString = readInputString(conn);
       String outputString = cmd.reactionToCMD(inputString);
       sendOutputData(outputString, conn);
/*       try {
           conn.close();
       } catch (IOException e) {}*/
       midlet.showInfo("Client input: " + inputString + ", successfully received.");
}For "CMDProcessor" , it is the class of message processing before feedback to client.
Client side - ClientBox.java
public class ClientBox implements Runnable, CommandListener{
    StringItem result = new StringItem("","");
    private DiscoveryAgent discoveryAgent;
    private String connString;
    private boolean isClosed = false;
    private boolean boxReady = false;
    StreamConnection conn;
    private static final UUID ECHO_SERVER_UUID = new UUID( "F0E0D0C0B0A000908070605040302010", false);
    Form process = new Form("Process");
    ClientInterface midlet;
    public ClientBox(ClientInterface mid){
        this.midlet = mid;
        process.append(result);
        process.addCommand(new Command("Cancel",Command.CANCEL,1));
        process.setCommandListener(this);
        new Thread(this).start();
    public void commandAction(Command arg0, Displayable arg1) {
        if(arg0.getCommandType()==Command.CANCEL){
            isClosed = true;
            midlet.notifyDestroyed();
    public synchronized void run() {
        LocalDevice localDevice = null;
        boolean isBTReady = false;
        /* Process Gauge screen */
        midlet.displayPage(process);
        Gauge g=new Gauge(null,false,Gauge.INDEFINITE,Gauge.CONTINUOUS_RUNNING);
        process.append(g);
        showInfo("Initalization...");
        System.gc();
        try {
            localDevice = LocalDevice.getLocalDevice();
            discoveryAgent = localDevice.getDiscoveryAgent();
            isBTReady = true;
        } catch (Exception e) {
            e.printStackTrace();
        if (!isBTReady) {
            showInfo("Bluetooth is not avaliable. Please check the device.");
            return;
        if(!isClosed){
            try {
                connString = discoveryAgent.selectService(ECHO_SERVER_UUID, ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
            } catch (BluetoothStateException ex) {
                ex.printStackTrace();
        else return;
        if (connString == null) {
            showInfo("Cannot Find Server. Please check the device.");
            return;
        else showInfo("Can Find Server, stand by for request.");
        boxReady = true;
    /* True if the clientbox is ready */
    public boolean getBoxReady(){
        return boxReady;
    /* True if the clientbox is closed in run() */
    public boolean getIsClosed(){
        return isClosed;
    public String accessService(String input) {
        String output = null;
        try {
            /* Connect to server */
            StreamConnection conn = (StreamConnection) Connector.open(connString);
            /* send string */
            DataOutputStream dos = conn.openDataOutputStream();
            dos.writeUTF(input);
            dos.close();
            /* receive string */
            DataInputStream dis = conn.openDataInputStream();
            output = dis.readUTF();
            dis.close();
        } catch (IOException ex){
            showInfo("Fail connect to connect to server.");
        return output;
    private void showInfo(String s){
        StringBuffer sb=new StringBuffer(result.getText());
        if(sb.length()>0){ sb.append("\n"); }
        sb.append(s);
        result.setText(sb.toString());
}Client side - ClientInterface.java
public class ClientInterface extends MIDlet implements Runnable, CommandListener{
    private ClientBox cb = new ClientBox(this);
    private Form temp = new Form("Temp");
    private Command select = new Command("Select", Command.OK, 1);
    private Command back = new Command("Back", Command.BACK, 1);
    Alert alert;
    String[] element;
    String out;
    List list;
    public void run(){
        /* Send message and get reply */
        out = cb.accessService("Proglist");
        element = split(out,",");
        /* Use the reply to make list */
        list = createList(element[0], List.IMPLICIT, out);
        list.addCommand(select);
        list.addCommand(back);
        list.setCommandListener(this);
        Display.getDisplay(this).setCurrent(list);
    public void startApp() {
        System.gc();
        waitForBoxSetUp(); /* Recursively check for clientbox status */
        new Thread(this).start();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        notifyDestroyed();
    public void displayPage(Displayable d){
        Display.getDisplay(this).setCurrent(d);
    private void waitForBoxSetUp(){
        while(!cb.getBoxReady()){
            if(cb.getIsClosed())
                notifyDestroyed();
    public void commandAction(Command c, Displayable d){
        if (c.getCommandType() == Command.OK){
            if (d == list){
                /* Send the choice to server */
                out = cb.accessService(list.getString(list.getSelectedIndex()));
                alert = new Alert("Output", "selected = "+out, null, AlertType.ALARM);
                alert.setTimeout(2000);
                Display.getDisplay(this).setCurrent(alert,list);
        if (c.getCommandType() == Command.BACK){
            notifyDestroyed();
    public void showWarning(String title, String content){
        alert = new Alert("Output", "selected = "+list.getString(list.getSelectedIndex()), null, AlertType.ALARM);
        alert.setTimeout(3000);
        Display.getDisplay(this).setCurrent(alert,list);
    private List createList(String name, int type, String message){
        List temp;
        String[] source = split(message,",") ;
        temp = new List(name, type, source, null);
        return temp;
    private static String[] split(String original,String regex)
        int startIndex = 0;
        Vector v = new Vector();
        String[] str = null;
        int index = 0;
        startIndex = original.indexOf(regex);
        while(startIndex < original.length() && startIndex != -1)
            String temp = original.substring(index,startIndex);
            v.addElement(temp);
            index = startIndex + regex.length();
            startIndex = original.indexOf(regex,startIndex + regex.length());
        v.addElement(original.substring(index + 1 - regex.length()));
        str = new String[v.size()];
        for(int i=0;i<v.size();i++)
            str[i] = (String)v.elementAt(i);
        return str;
}

i haven't worked with devices but only with the toolkit emulators;
it definitely is possible...
u have to send the image as a bytestream and receive the image at the jsp end...
and then reconstruct the image.
the Stream classes in J2ME AND J2SE are all u will require.
also the Image class.
i have not done this but i have successfully sent an image frm a jsp and displayed it on the emulator.

Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
Thank You all in Advance

You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
Then setup Sync once again using that account and merge the content on the Sync server with your computer.
* Merge this device's data with my Sync data

My airmac no longer finds cameras. Will find iphone, but no longer photos either. My Canon Power Shots, old and new, are as good as rocks.

Recently my MacBook Air does not list devices that are cameras. It used to, but does not now. I have recently a) used MacKeeper, b) deleted movies, photos (thousands of those spawning ones) for space, c) installed ios 7 on my iphone, d) bought a Canon Power Shot SX 170is.
Image Capture, Image Browser EX, iphoto--nothing gets photos...nothing sees photos residing on my Canon PowerShots (old and new) or my iphone. Macbook Air can not find cameras.
Help. All cameras are rocks now.

MacKeeper is considered Malwear and has destroyed many iPhoto libraries - read the user tip on it - https://discussions.apple.com/community/ilife/iphoto?view=documents - my best guess is that your problem was caused by MacKeeper - I suggest you remove it according to the instructions in that user tip
to test depress the option key and launch iphoto - create a new library and see if it works correctly with your cameras - post back with the results
LN

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook have all of their old and new emails. My old emails have vanished from Apple Mail.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook in my company have all of their old and new emails. My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices. I do not have my mail backed up in time machine recently nor did I export my emailbox recently. Any ideas?

Try looking in your User folder.
Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

Facetime between old and new devices

Similar Messages

Maybe you are looking for