FaceTime -connecting and connection lost error.

Hi! I've been having a problem recently on my Facetime app. I use Facetime on my Ipod 4G and it would work completely fine. But now whenever I try to call someone it says "connecting" and eventually says "connection lost". I have tried it with 3 difference iPods with two different wifi locations. The problem was started or noticed on 9/28/2013 and still not able to resolved. I have restored the router configuration to factory default on one of the Wifi to see it would help but it did not help. If someone could help me that would be greatly appreciated.

Hi Thasham,
Thanks for visiting Apple Support Communities.
You may find some of the additional troubleshooting steps in these articles helpful:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Best Regards,
Jeremy

Similar Messages

  • Facetime  "connection lost"

    Hi.
    I'm new to Facetime. I've been trying to connect from my iPod touch 4th gen to my mother's iPad. Both of us are able to get a ringing tone and both know the other is ringing. The receiver of the call accepts it but after saying "connecting" for a few seconds it flashes up "connection lost".
    Also, if I try to ring my mother from my Apple iMac desktop I get the message my mother "is not available for Facetime" when I know full well she is available!
    Thanks for any help.

    On both devices, go to Settings>FaceTime>You can be reached at. Are you trying to call an email address (or possibly a phone number if the Apple ID has an iPhone associated with it) that is also listed on yor device?
    You can't call yourself successfully. If you try you get an error like you are getting.
    If that is the case then:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    If necessary also see:
    iOS: Troubleshooting FaceTime                  

  • Database Connection Lost Error

    Hi,
    MyScenario is :
    We send a query to database A collect resultset in java mapping and transform it to three more Select queries and send them to Database B So two chanels are there:
    Sender JDBC channel, Receiver JDBC Channel.
    Now the Output of Database B is converted to IDOC and sent to R/3 System.
    This is working fine, but sometime it stuck at Database B saying error "connection Lost". And works fine afterwards.But in that case we miss the records which could not be processed.
    What can be the reason for this ? Please suggest the solution at teh earliest. Can overloading be the reason for losing connection. Please suggest...
    Thanks & Regards,
    Priyanka

    Hi Priyanka,
    You have to close the connection afte accessing the JDBC  "A".
    So that it could be accesed by others.
    Try to implement the suggetion given by sarvesh.
    If it still does not work then i would say you go for JDBC look ups.
    It will improve the performance as well.
    Thanks
    Sunil Singh

  • Firewall connection lost error when opening the so...

    Hi Friends,
    I've a Nokia N73 edition with me..
    i am planning to update the latest firmware.
    The problem i am facing when opeing the Software updater is ....
    Network connection lost..
    Check your network connection or a firewall is preventing from working properly...
    Please lwet me know how to get rid of this and update the latest firmware to my mobile
    Cheers,
    Suneel.V

    In case any one else has this problem... I was getting the same error without any firewall enabled and a high speed link. After tracing the network packets I noticed that the application was in fact communicating with NSU but that there appeared to be a problem with the creaton of a secure session between the application and the server. The error message tries to help but can really send you on a wild goose chase looking for firewalls etc.
    In my case the reason was due to my PC having an incorrect system date and time.
    I set the date and time and bingo, no more error.

  • Microsoft Mouse - Just Want to Lose that "Connection Lost" error message!

    I'm using a Microsoft Mouse 5000 with a 2006 MacBook (latest version of Leopard).
    My MacBook is used as a home theater system and I use the mouse while sitting on the couch, which is maybe 15 feet away from the MacBook (I would have thought I was easily within the 30 foot bluetooth range?)
    Issue is that the mouse frequently drops the bluetooth connection - then picks it up again seconds later. Note that the mouse remains paired, no issue there.
    Anyway, the dropped connection is not so much the problem - it's the darned error message! It is SO annoying to have the "connection lost" message and mouse symbol appear in the middle of the screen while I'm watching a movie!
    Questions:
    a) any suggestions for improving my connectivity? I believe my firmware is up to date (I can't see any updates on the Apple support site since version 1.2 in 2004).
    b) if the answer to a) is no, anyone advise if I can disable that error message from appearing? As I said, it's superfluous anyway since the connection resumes seconds later
    Thanks!
    SM

    An iPod can only sync with one iTunes library. That is why yu are getting the message when yu try to sync it to the other library/computer. You can however, manage music and viodeos among multiple computer by:
    Using iPhone, iPad, or iPod with multiple computers

  • InDesign quits after network connection lost error

    InDesign all of a sudden is crashing with the following error:
    "The network connection was lost for the file InDesign SavedData, or the file was modified by another process"
    followed by:
    Adobe InDesign is shutting down. A serious error was detected. Please restart InDesign to recover work in any unsaved InDesign documents." (button) "Return to Finder"
    then:
    "InDesign quit unexpectedly. Click Reopen to open application again. Click Report to see more detailed information and send a report to Apple."
    Then I get the Adobe Crash Report.
    Restarting InDesign gives the same results, both opening a file and opening the application directly.
    I have trashed InDesign Preferences and tried throwing away the InDesign Recovery folder, but no change.
    Specifics:
    -InDesign CS5, ver 7.0.4.553
    -iMac Core i7, OS 10.7.4
    -I am not in a network environment—all InDesign documents are local.
    -InDesign CS4 works okay.
    Here is the the crash report:  http://pastebin.com/1ZvvSJCa
    Any suggestions will be greatly appreciated!
    Thanks,
    Cliff

    Adobe support tells me Adobe does not support saving files to a server.
    Neema: i understand that,InDesign does crashes on server.we have very limited support on servers
    Neema: Please try to save the file locally on machine and see the behaviour of indesign.
    Jack: I've worked with indesign since the beginning and i never had that problem... only when inadvertently pulling the plug from my computer
    Jack: Having files locally is not an option
    Jack: Can you tell me what the line in the crash log means?
    Jack: 2 DataBaseLib.dylib 0x000000010efb048a SUIDS::HandleLostNetConnect(IDFile const&) + 74
    Jack: this part specifically:
    Jack: HandleLostNetConnect(IDFile const&) + 74
    Jack: I have done extensive searches for this error (specifically with the + 74 at the end. I find many with a different number. Each number means a different reason why the network connection was lost, but there is no mention anywhere of 74
    Neema: i do apologize for the inconvenience Jack.Adobe donot recommend saving or opening files from server.
    Neema: we donot have support on servers.And cannot commit on its behavior on server
    Jack: That is disappointing!!
    Jack: I still need to know the meaning of HandleLostNetConnect(IDFile const&) + 74
    Neema: We understand that.But application behaves differently on servers.
    Neema: we apologize but we donot know the exact meaning of the error you received.As stated this varies from server to server

  • FIM 2010 Sync Error : stopped-database-connection-lost

    Hello everyone,
    a weird thing just happened to me,
    i'm synchronizing my MA and suddently i get the "stopped-database-connection-lost" error
    i have 5 Galsync MAs working perfectly and this sixth one just failing ... (since like today)
    which makes me wonder what is happening ... ?
    any ideas ?
    thanks !
    Hitch Bardawil

    Hitch,
    Look in the event log on the FIM Sync Server and on the SQL Server.
    This error occurs when FIM can't contact the SQL Server that hosts the FIMSynchronizationService database.
    Does this happen every time the sixth MA is run? What if you run them in a different order (might help us distinguish between a resource issue and something specific to that MA)?
    Here are a few related threads:
    http://social.technet.microsoft.com/Forums/en-US/65920fc0-a9ac-4a87-892f-338a6884cbd5/action?threadDisplayName=fim-ma-run-profile-stuck-with-stoppeddatabaseconnectionlost
    http://social.technet.microsoft.com/Forums/en-US/39129eac-09d3-48ff-83f9-ecb4ae2424b6/action?threadDisplayName=sharepoint-profile-synch-stoppeddatabaseconnectionlost
    David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

  • "network connection lost" while installing Ovi Sto...

    I'm getting a "Network connection lost" error shortly after the installation of a downloaded app is started. The status bar gets to about 15% and then the installation is interrupted.
    I've tried using WiFi and non-WiFi connections, but the result remains the same.
    I've noticed other threads on this forum about a somewhat similar issue but no real solution appears in any of them.
    My N8-00 was upgraded to the Belle OS over the weekend and it caused most of the apps to be uninstalled. Now I'm trying to get them back but fail to do so because of the error.
    Are there any working solutions for this very annoying error?
    Or do i have to wait for Symbian Clara (or whatever name they give it) to be installed?
    - Design a different world
    Solved!
    Go to Solution.

    Performing hard reset will set the phone to its default setting. You may have to check the settings of your phone again.  To define the your access points, go to settings> connectivity> settings> network destinations> Internet> options> new access point> Automatically check for available access point> yes. You can choose GPRS connection first and then run the same steps and then set up your WLAN. 
    Let us know how you get on and feel free to post any other questions you may have. 
    Ricky07
    If you think this post is helpful, please click the white star below.

  • Connection lost to user XY

    Hello! We use mobile Windows XP Embedded machines with SAP GUI 6.40 on fork lifters. The connection is provided via WLAN. But it happens from time to time that the SAP GUI hangs and they have to wait (for 3-5 minutes) until the "connection lost" error comes or they reboot the machine. What is happening here? The log has 2 entries for each break down (translated from german):
    a) system call recv failed (errno 10054)
    b) connection to user 6159  (NUMBER), Terminal 59 (NUMBER) lost
    I checked the network with a mobile notebook and it looks ok. I don´t think it´s the wireless network. It must be something else. It can happen while performing a transaction, also when logging in.
    Thanks for any help!

    It´s patch level 28. I will see if I can try to use 7.00... strange thing is, if there are multiple SAP windows open, only one hangs, the others run ok.

  • Connection Lost PXI 8106/8108

    Hello,
    I'm using PXI system for running several modules (Motion, digitizers, DAQ Etc.).
    My system is part of a SA TCP/IP network, with a static IP address.
    The OS of the PXI is phar lap ets.
    My host is LV2013SP1, Windows7.
    I get a connection lost error to my PXI every few minutes. I tried other controller (8108) and other connection port, unsuccessfully.
    Any Idea anyone?
    Thanks,
    Yakir

    Hello yakir, 
    Are you able to see your pxi chassis on NI-MAX? By the way which PXI chassis are you using to connect the controllers?
    In case you are not able to see the chassis on NI-MAX please try the following:
    PXI Chassis Does Not Appear in Measurement & Automation Explorer (MAX)
    http://digital.ni.com/public.nsf/allkb/61B9E985DC3025BD862569EB00718360
    Regards.
    Ernesto.

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • When I try and make a FaceTime call, it always says, 'Connection Lost'. Help?

    I was trying to FacceTime my friend and it was the usual screen that you get when you recieve a FaceTime call. I hit 'Accept' and it says connecting but, it always ends up saying, 'Connection Lost' or 'FaceTime Failed'. When I try and FaceTime them back it says connecting but again, says 'Connection Lost' or 'FaceTime Failed'. And help on what to do?

    There have been numerous reports of FaceTime connection issues for the last few days and it is unclear what the cause is. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?start=120&tstart=120

  • HT201210 I have just downloaded ios7 and have lost my iMessages it keeps asking me to sign in which aim doing then says cannot sign it network connection error try again later even though I have full gone and wifi signals please help

    I have just downloaded ios7 and have lost all use of my iMessage I have reset all my settings but still nothing. I have entered my apple ID as requested but keep getting a message saying cannot sign in network connection error try again later even though I have full phone and wifi signals. Please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • TS1398 Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

    Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • My Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    Hi hema87,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps you can try if FaceTime is timing out:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Cheers,
    - Ari

Maybe you are looking for