Facetime connection problems using Verizon mifi 4510L device

Anyone having problems with iPhone facetime connection being dropped when using this wifi device? Phone/facetime work perfectly when on other wifi connections. Thanks, Matt

The Verizon 4G network has terrible latency, so, while downloads (and uploads) can be fast, it can take them a while to get started, so any exchange that needs a fast response is likely to be unstable. The network also sometimes stops working for several seconds at a time. I have a Verizon LC-11 wireless hotspot and I'm not happy with it.

Similar Messages

Verizon Mifi 4510L 4g LTE speeds of less than 2 MB

Hello,
I have a Verizon Mifi 4510L, and am loctaed in zipcode 43402.
All of my friends 4G Phones receive ~15 MBs download. However my Mifi is only receiving less than 2 MB at anytime, even though the connection is stable. I have purchased an antenna, moved it around the house, etc... But nothing changes and remains a bad connection. I am 99.9% sure that my device is fine.
What could the issue be, am I being limited on speed because its a mifi and not a phone?

JD,
Your MiFi does not sound like it is performing correctly. 4G should be atleast 5 Mbps when testing on Speedtest.net. What I suggest is a level 2 reset to clear up your SIM card and reconnect to the local towers.
Level 2 Reset:
Power down the MiFi
Remove the back cover
Remove the battery
Remove the SIM card
Allow the MiFi to sit for 30 seconds
Reassemble the MiFi
Test the Connection
Performance problems are normally temporary and can be resolved. If you continue to have poor performance then perhaps there is some strong interferance where you are trying to use the MiFi. You shouldnt have to go outside, but try to conduct a Site Survey to see if you can get any better results. Here is a great link to walk you through the Site Survey process:
http://3gstore.com/page/13_will_an_antenna_help_me.html
If you find a good area then I can share some info on boosters and antennas which may make the MiFi more consistent for you. If not then contact VZW support directly through the 1-800 number. They should be able to confirm a service problem in your area.

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Connectivity problem from Verizon to China Telecom

It was China Netcom last time. Now, it's China Telecom.
(ref: http://forums.verizon.com/t5/FiOS-Internet/Connectivity-problem-from-Verizon-to-Asia/m-p/646257)
MTR:
HOST: alex-macmini.local Loss% Snt Last Avg Best Wrst StDev
1.|-- 10.21.1.1 0.0% 10 0.4 0.5 0.4 0.6 0.0
2.|-- l100.lsanca-vfttp-75.verizon-gni.net (72.67.93.1) 0.0% 10 8.5 8.9 5.7 21.5 4.5
3.|-- g1-2-0-3.lsanca-lcr-22.verizon-gni.net (130.81.223.8) 0.0% 10 9.5 12.2 9.1 26.4 5.1
4.|-- ae10-0.lax01-bb-rtr2.verizon-gni.net (130.81.199.106) 0.0% 10 10.7 11.1 9.9 15.7 1.6
5.|-- 0.ae4.xl4.lax1.alter.net (140.222.227.129) 0.0% 10 14.9 13.5 10.3 15.9 1.9
6.|-- 0.xe-11-2-0.gw2.lax1.alter.net (152.63.4.197) 0.0% 10 15.1 13.6 11.9 15.5 1.1
7.|-- internet-gw.customer.alter.net (157.130.230.74) 20.0% 10 336.4 324.1 302.2 336.4 10.5
8.|-- 202.97.90.129 10.0% 10 333.8 325.4 299.6 339.0 10.8
9.|-- 202.97.51.137 10.0% 10 500.4 489.1 459.6 503.8 12.8
10.|-- 202.97.34.81 30.0% 10 504.0 491.6 455.9 504.7 16.9
11.|-- 202.97.33.169 10.0% 10 513.5 501.7 480.6 517.4 11.1
12.|-- 119.147.222.34 10.0% 10 497.0 485.0 448.9 502.8 15.3
13.|-- 119.147.222.202 50.0% 10 502.0 482.7 452.6 502.0 18.2
14.|-- 119.147.27.226 10.0% 10 508.3 499.6 474.5 516.8 13.2
15.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
16.|-- 183.60.57.155 0.0% 10 507.1 494.4 477.4 507.1 9.1
Note 7, 8, 9 are in China. 20% gateway packet loss? Unacceptable. Consider how badly TCP was designed, congestion control would render the link useless.

Things are only worse
HOST: alex-macmini.local Loss% Snt Last Avg Best Wrst StDev
1.|-- 10.21.1.1 0.0% 10 0.5 0.5 0.4 0.6 0.0
2.|-- l100.lsanca-vfttp-75.verizon-gni.net (72.67.93.1) 0.0% 10 34.3 18.2 5.0 34.3 10.3
3.|-- g1-2-0-2.lsanca-lcr-22.verizon-gni.net (130.81.223.12) 0.0% 10 10.2 11.7 9.4 14.8 1.7
4.|-- so-3-1-0-0.lax01-bb-rtr2.verizon-gni.net (130.81.199.40) 0.0% 10 8.9 11.8 8.4 23.2 4.2
5.|-- 0.ae4.xl4.lax1.alter.net (140.222.227.129) 0.0% 10 14.4 12.9 10.7 14.4 1.0
6.|-- 0.xe-11-3-0.gw2.lax1.alter.net (152.63.4.201) 0.0% 10 10.7 13.8 10.7 26.4 4.5
7.|-- internet-gw.customer.alter.net (157.130.230.74) 20.0% 10 343.6 345.2 337.0 350.7 5.2
8.|-- 202.97.50.45 10.0% 10 347.0 347.7 339.7 353.5 4.6
9.|-- 202.97.52.253 10.0% 10 489.7 491.5 482.4 510.1 7.9
10.|-- 202.97.58.97 0.0% 10 494.0 494.9 489.6 498.8 3.3
11.|-- 202.97.53.37 0.0% 10 496.6 498.9 494.2 502.7 2.9
12.|-- 202.97.57.206 20.0% 10 494.7 498.6 494.7 501.7 2.6
13.|-- bj141-130-154.bjtelecom.net (219.141.130.154) 50.0% 10 502.3 498.2 495.2 502.3 2.4
14.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
15.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
16.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
17.|-- 219.239.92.194 0.0% 10 510.3 514.8 510.3 519.8 3.1
18.|-- 124.202.11.62 0.0% 10 506.9 512.4 505.0 516.9 3.8
19.|-- 124.202.11.30 20.0% 10 506.2 513.0 506.1 517.4 4.4
20.|-- 115.182.92.1 0.0% 9 486.5 495.1 486.5 499.5 4.3

Http connection problem on real series 40 device

Hi guys,
I'm having a problem with my midlet whenever it connects to a servlet through HTTP. When i access the servlet through a getResponseCode() command or through an openInputStream() command, a java.io.ioexception exception is called. I'm sure that the problem isn't with the servlet since i can access it just fine both through a browser or through the nokia emulator. The problem only happens when i use a real 7210 device to test the application. When i tested the application on a real series 60 device it worked just fine.
I think the problem is with the security settings of series 40 phones. It seems that the midlet doesn't allow http connections. Do i need to do anything to allow http connections from a series 40 midlet? I have already set the gprs access point to internet as some posts have advised. Any help would be greatly appreciated. Thanks in advance!

Hi guys!
First of all, I'll introduce myself. My name is Angel and I am a spanish guy who likes this techs.
I've been reading your answer to the question related to why http connections doesn't work on series 40 nokia mobiles. I mean about protocol used on connections among mobile-WAP Gateway... and I really have to tell you that you helped me about understanding how they actually work...
Well, anyway, the thing is that I'm working with this sort of connection through the internet in order to request information from a servlet wich is in close realation with a Database. I launch queries SELECT,INSERT,DELETE,... against the server wich reports the results. This is part of my final year project, in order to finish my degree in Computing Science Engineering.
But, I am using the series 40 Nokia, to be exact my mobile is the 6100 which has almost the same features than the 7210, and I do http connections over the WAP Gateway of my networking operator. I havenṫ ever tried do them over GPRS yet, because at glance it "seemed" to work fine and I didnṫ really need to mess with it. Having this hardly controlled, well it turned out that I got some troubles in connections I report you so I hope you can also help me about:
1.- Connections several times are cut, when it's opened not longer than 45 seconds about.
1.1.- I found the trick that not closing the outputStream I have indefinied time to deal with them,
having to close them manually, I mean connections.
1.1.1 - Unfortunetly that doesn't happen always. The fact is that It works really fine but for some
particular ocassions when It seems as if it couldn't find the server because it receives no
data.
WIth all this, I'd really like to know what the hells is actually going on the wap-gateway. Because one of the things I could realize is that http connection headers are completely changed and fullfilled of data, so I had to take really care with them in order to keep the one I needed.
Probably that depends on the networking operator I am dealing with, isn't it?
And going further connections are set up like the mother and father of the networking operator wap-gateway want, I guess, aren't they?
And I'd like to ask you if my tricky thing is actually crazy just to get what I am looking for, because it doesn't work a few few times, but those make the application goes down.
And another, When you talk about TCP/IP stack. You mean the queue which in a conventional connections processes are queued-up in waiting for the chance of being admitted to be processed if they are TCP incoming connections or in the oppsoite way if they are outcoming...?
OK, thanks in advance , and sorry for my peculiar long message, because I'm not so used to write over here, though I am when I try to find answers to the unknown ;-)
Congratulations to this forum and greetings to those who can read me.
Greetings from the south-east of spain where sun is stuck on your face even if you use sun-glasses.
peteparker ([email protected])

TS1702 iOS 6 facetime connection problem when calling from a difference country!!

Facetime having problem after iOS 6 upgrade, it can connect using the same network but fail to connect when you are in a difference network or country using wifi. Please Help!

What countries?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Midi connecting problems: using Logic Express 9 with MBox 2 interface and a Mac OSX 10.6.8

I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Also try turning off Bluetooth

New computer (windows 7) connection problem with Verizon DSL

I just bought a new computer to replace a dead one. I took the old one away and plugged the new one into the Verizon cable. I have Verizon DSL, no wireless, no network at home, just a computer and a Westell modem.
On the new computer, I have a successful internet connection in that I can reach Google. I can conduct a Google search, but when I click on a search result I cannot reach that site. I CAN successfully send and receive Gmail. I CANNOT connect to Verizon's website, Amazon, Washington Post, Ebay, or most other sites. What happens when I try is a small box comes up in the browser window saying "Connecting to [name of site]" and the in-progress thing goes around and around. This will go on for as long as I let it (more than 1/2 hour), with no timeout or failure message -- just an empty browser window. Results are the same in Explorer and Firefox.
I hooked a borrowed computer into my Verizon line and the internet connection works fine to any site I try (I'm on it now). Verizon techs have also done a line test and it's fine.
I have taken the new computer (running Windows 7) back to the store 3 times. They have hooked it into an Earthlink DSL line there and have shown me they have no difficulty whatsoever going to any of the sites that are not working for me at home. They say the problem MUST be something to do with my Verizon connection.
I've called Verizon tech support 3 times now. They say it's not them, and there's nothing they can do -- but their Remote Assistant software isn't able to connect IN to my machine, just as I can't connect OUT to the Verizon site. I have asked for a more up-to-date modem and was refused.
I was tempted to just upgrade to FIOS but Verizon is being so unhelpful I am ready to bail on Verizon entirely. Before I do, can anyone suggest what might be going on here?

I bought an HP computer at Staples and had the same problem. HP and Verizon could find no problems. Verizon said the would send me a new modem to see if that fixed the problem. The problem was corrected after Verizon sent me a new modem for free.

Wireless connectivity problems using IOS 6.0.2?

After installing IOS 6.0.2 on my iPhone 5 I can no longer connect to known wireless sites. I've been through troubleshooting with both Apple and my ISP and no luck. I'm thinking there's wireless connectivity problems with this latest update (my iPad 3 is still running 6.0.1 and is fine on my wireless network). Are others having this issue as well?

I am not guaranteeing this fix , but it worked for me , so far. I have an iphone 5 and it had ios 6.0.1 . Worked fine. Upgraded to 6.0.2 and it wouldn't connect with home router most of the time. My son in law an IT guy for the Government came up with a solution. The problem seemed most likely with routers that are bought and not configured and retain the original factory settings. Therefore my phone considers my home network a generic one and I have to manually connect to it. To distinguish the network we did the following.
1) went to settings on my iphone
2) choose "my home network" by pushing the arrow on the right
3) This brought up the network info page. (it says "forget this network " at the top)
4)DHCP will probably be highlighted.
5) touch "static"
6) This will bring up the manual settings
7) We entered the following.
For Ip Address 192.168.1.15
Subnet Mask 255.255.255.0
Router 192.168.1.1
DNS 4.2.2.1,4.2.2.2,8.8.8.8
Leave the HTTP Proxy to off
This will assign a static Ip address not a dynamic one and should work.
If it doesn't , go back to step 3 and select DHCP and return to the dynamic state .

Laptop won't reconnect to home wireless FiOS connection after using Verizon Wireless connection

I have a laptop that I've had connected to my home FiOS Internet connection without problems in the past. Now, when I leave the house and use my Verizon wireless stick to connect to the Internet and then return home the laptop no longer connects to the home wireless network. Any ideas? I've already:
Rebooted the laptop
Rebooted the router
Viewed the settings for the laptop connection on the router info page
Thanks.

xillib wrote:
I have a laptop that I've had connected to my home FiOS Internet connection without problems in the past. Now, when I leave the house and use my Verizon wireless stick to connect to the Internet and then return home the laptop no longer connects to the home wireless network. Any ideas? I've already:
Rebooted the laptop
Rebooted the router
Viewed the settings for the laptop connection on the router info page
Thanks.
Hello,
If your internet connection at home is working fine using a wired connection (using an ethernet cable) to the router and you're only having trouble connecting wirelessly, then I would recheck the network settings on your laptop:
http://www22.verizon.com/support/residential/internet/fiosinternet/networking/setup/addwireless/1265...
The important part of this process is ensuring that you're selecting the right network name (SSID) for your home residential wifi network and entering the corresponding encryption key.
If you need additional help, please call Verizon's Technical Support department at 1-888- 553-1555.

FaceTime connection problems since IOS6. Are there any solutions?

I have an iphone 4 my friend has iphone 4S. We have both successfully used FaceTime previously as she is based in another country. We can use iMessages but neither can connect to the other with FaceTime. It calls but then says Connection Lost. I've searched everywere and I contacted my carrier and they told me to do a reset which I did (and I told my friend to do it too) but it still doesn't work. Is this one of the problems with the release of IOS 6? Does anyone know what Apple are doing about the problem? Thanks.

You have Adware installed. Click the Firefox button, go to Add-ons | Plugins and disable '''My Web Search'''. See http://en.wikipedia.org/wiki/My_web_search
Also, update Firefox to the latest version which is 4.0.1 by clicking Help | About Firefox | Check For Updates button.
In addition, update Adobe Flash via http://get.adobe.com/flashplayer/
Here's the Adobe security advisory for Flash: http://www.adobe.com/support/security/bulletins/apsb11-12.html

Having network printer connection problems using a Macbook Pro

I hope a "greater mind" can suggest a solution to the following problem:
Up until 2 days ago, I was successfully connected to the network printer at my office using both my Macbook Pro at work and at home (both wirelessly, OS 10.6.8). From yesterday, however, I now only receive the following message when I send a file for printing: "network host (and then its IP address) is busy. Will try again in 10 seconds."
All right, my system admin. advised me to re-install the printer on both computers. I did. In printer set-up, 1) Protocol: Line Printer Daemon - LPD; 2) Address: the IP address of the printer; 3) Queue: secinmac. This is the queue name specifically for Mac use and given to us by the company who installed our network printer; 4) Name: we use the printer's IP address; 5) Location: left blank; 6) Print Using: Generic PCL Laser Printer. Further for 6), in the "installable options" dialog box, I click "Duplexer". Then, finally, I click "ADD". The printer is added.
However, when I try to print a file, I continue to get the "busy" message. The file spools for about 3%, and then the "busy message" appears, and I cannot print. You can imagine how frustrating this is when the problem has arisen from one day to the next! A colleague who also uses a MacBook Pro sent a file to print on the network printer today, and he had no problems! I, however, have no success !
Any ideas that can help me? Thanks, in advance!

Thank you for taking the time to respond.
Yes, I tried this when I was reading a bit of Apple communities history on this matter, and it did not work. I also tried this, and then rebooted my Mac, but to no avail! While I was at the office today, my system admin also logged into our network and tried to get something to print on his Mac, but he now has the same problem as I do.
He gets the "busy message", too !
I'll try to see if I can get a solution from APPLE by going through my support service agreement.....From reading the history on this issue, I would have thought that APPLE would have worked on this to come up with a fix by now...!
Thank you again for your suggestion! Cheers.

Facetime connection problems

Running Mac OS X Lion 10.7.1 on my MacBook Pro 13 inch 2010
I can receive inbound calls on FaceTime for Mac, no problems encountered with all inbound FaceTime calls
But I can not connect outbound FaceTime calls, the receiving party will receive a ring or two but it would not connect
Would appreciate any help
Thank you very much

Hello,
I have the same problems, and the solution I found is that when the conections fails, then I go to the preferences of Facetime on my iMac, and disconnect the account ID. Then i turn it on again, and repeat the email ID for conecttions, and then, it works, till the new fail... I'm trying to contact Apple Support to know if it will be an update for facetime for Mac OS. I tryied the conections between iphone and ipad, and there is not problems. The problem is only between my iMac and iPhone o iPad...
I'm waiting for the update!!!!
Thanks and sorry for my english....

Connection Problem using oracle.jdbc.xa.client.OracleXADataSource

Unable to get a connection from connection pool Realm1tx
Actually there are 5 connection intialized but no connection is there in active pool.Sometimes when I
go to weblogic console and refresh the connection comes alive temporarily.Can anyone help me out for
fixing this problem
Driver Used:
oracle.jdbc.xa.client.OracleXADataSource
Error Message
Unknown error occurred: XA error: XAER_RMERR : A resource manager error has occured in the transaction
branch start() failed on resource 'realm1tx' null sql=[SELECT Person$1.id,NULL,Person$1.id,NULL,NULL
FROM Person Person$1 WHERE (Per
son$1.securityId = 'admin')] throttle=[-1]
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured in the transaction
branch start() failed on resource 'realm1tx' null
Thanks in advance.
Ragavendra.

Which version of oracle thin driver are you using? Oracle 920 thin driver has some issues.
Thanks,
Mitesh
Ragavendra wrote:
Unable to get a connection from connection pool Realm1tx
Actually there are 5 connection intialized but no connection is there in active pool.Sometimes when I
go to weblogic console and refresh the connection comes alive temporarily.Can anyone help me out for
fixing this problem
Driver Used:
oracle.jdbc.xa.client.OracleXADataSource
Error Message
Unknown error occurred: XA error: XAER_RMERR : A resource manager error has occured in the transaction
branch start() failed on resource 'realm1tx' null sql=[SELECT Person$1.id,NULL,Person$1.id,NULL,NULL
FROM Person Person$1 WHERE (Per
son$1.securityId = 'admin')] throttle=[-1]
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured in the transaction
branch start() failed on resource 'realm1tx' null
Thanks in advance.
Ragavendra.

Compose Message problem using Verizon webmail

On my Windows 7 machine, using either Chrome or Explorer to access the Verizon webmail page, I unable to compose a message. The compose message window will not open after clicking GO. Yet when I use my Vista machine there is no problem. Any suggestions?

Might be prevented by a popup blocker.

Facetime connection problems using Verizon mifi 4510L device

Similar Messages

Maybe you are looking for