FaceTime disabled access,please help
Yesterday I was playing about with my new ipad and came across disable access so to try it out and see what it was I randomly decided to disable access to my face time and iTunes, after I done so the app icons disappeared and they are nowhere to be found, please help me get them back
It sounds like you may have disabled them with Restrictions.
Go to Settings > General > Restrictions and either disable Restrictions or within Restrictions, enable FaceTime and iTunes (Store?).
ivan
Similar Messages
-
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME
I have the same problem with mine... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
HT5622 hi, i dont use to facetime. could you please help me?
hi, i dont use to facetime. could you please help me?
Hi,
change loginform action to login2 (servlet) for validate user.
<Form name=loginform onsubmit="return checkUserName(this);"
action=login2 method=post>Regards,
Ram. -
Can someone pls help me?? Okay..I've been trying to fix this for DAYS now! When I sign in (under settings) w my new apple ID, then go to update or purchase something I cannot get the new apple ID to come up. It's still using the old one (which is disabled) ..please help!
Delete what? The ID's? They cannot be deleted - you just quit using it.
If you still have one old ID - that you have purchased content with - you are saying that the password no longer works with that ID? Did you try to reset the password for that ID?
Read this - instructions if the ID was disabled for entering the wrong password.
http://support.apple.com/kb/TS2446?viewlocale=en_US&locale=en_US
If it gets too involved - you can always contact support.
http://www.apple.com/support/appleid/
Just do not create another ID! -
I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!
This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed. It's a good idea to have your location setting on automatic. Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location. Do this even though you have the correct time Date settings displayed.
-
Ok so I got my iPod back from the Walmart care plan. My iPod broke so Walmart fixed it. But now I any sign into iMessage or FaceTime! And I really want to text and FaceTime. So please help!! Thank you!! ☺
Maybe:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting FaceTime
iOS: Troubleshooting Messages
It is not clear what "But now I any sign into iMessage or FaceTime! " means -
My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com -
I forget passcode guided access please help?
i forget passcode guided access please help?
Hello alimoshkforoush,
It sounds like you forgot the password for the Guided Access session. Try resetting your iPhone:
Reset
You should reset your device as a last resort and only if you can’t restart it.
To reset, press and hold both the Sleep.Wake and Home buttons for at least 10 seconds, until you see the Apple logo
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Thank you for using Apple Support Communities.
Best,
Sheila M. -
HT204380 is there a button on my iphone to enable facetime for use, please help
hi, im having problem using facetime on my ipone 4 can someone please help me... thanks
Where did you buy the phone?
HAve you gone to settings/general/restrictions is facetime on there?
FACETIME MISSING
The governments in some middle eastern countries have banned Facetime and it is disabled on iphones purchased in those countries. The countries include KAS, UAE and others. There is no way to get Facetime on such phones (for example it cannot be downloaded and installed) and taking the phone to another country does not cause Facetime to reappear on such phones. In support.apple.com/kb/ts3367 it says “Note: FaceTime may not be available, or may become unavailable, on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. Check your device's region of purchase for more information.” -
OS- Windows 7
Upgraded from Firefox 3. I tried updating to FF 4 a while ago and had the same problem, so I went back to 3. Decided it was time to upgrade and the problem recurred. Please help!Try to modify the pref <b>ui.trackpoint_hack.enabled</b> on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) -
I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!
The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
-
Ipad disable question please help
I am having an annoying problem. I am from Vietnam but currently staying in Australia. My girlfriend bought an iPad 4 in Vietnam from a mobile phone retail store (not sure if it is official retail or not) and she had never used any smartphone or even a computer before. People at the store helped her set up and even gave her an account to download free apps from iTunes. And now her iPad is disable because her brother attempted wrong pass code too many times. Now the only thing appear on the screen of the Ipad is disable and please connect to iTunes. She brought the device back to where she bought it and the guy there plug it in their computer and tell her the only way to fix this is to restore everything but she need to type in the icloud password otherwise the iPad could never be used again. She does not have any memory about the account that she used when she unbox the device. But she is sure that the device come to her with full seal. I was not there therefore i don't know anything other than the things above. I remember that i read some stuff earlier on the internet saying that once ur device is disable. You can actually plug it in the itunes and key in the passcode and unlock it. Is it possible to do so ? Please help. Pardon for my writing as it is realy suck.
No, once it's disabled, it needs to be restored.
As for the unknown iCloud password, your girlfriend needs to call Apple, prove she's the original owner, and they be able to remove the account. It will still need to be restored in iTunes, but this way it won't require the iCloud password after it's restored. -
My iPad2 is disabled. my iPad appears "iPad is disabled". Please help
My iPad 2 is disabled.I tried to restore using iTunes, but after downloading iPad software about 80M, my iPad's screen shows "IPad is disabled, connect to iTunes". Please help.
I assume that you've tried your passcode too many times ? If so you will need to connect it to your computer's iTunes and you should then be able to restore it and copy your content back to it : http://support.apple.com/kb/HT1212
-
My ipod is disabled. When i turn it on it says to connect to itunes. I can get to where the screen displays a cord and an itunes logo, but itunes does not pop up, nor display my devices. This is probably because I have not synced my ipod with this computer, nor with any computer. How do I sync my ipod with itunes when it is disabled? How do I get itunes to pop up when my ipod is connected to the computer? Please dont give me a link, i really would like a step by step guide. I have itunes downloaded on this computer, but it does not pop up or display my devices. Do I need to create an itunes account? I have so many questions because this is my first apple device. If you were wondering, my ipod touch is disabled because I forgot my passcode. PLEASE help, I dont care if I have to reset my ipod, I just want to be able to use it!
Use Device Firmware Mode...
1. Turn off your ipod To do this, hold the home and sleep buttons for 10 seconds, ignore slide to power off message.
2. Release the power button when you see the apple logo (keep holding the home button)
3. Keep holding until you see a message.
Now restore from a backup!
Alternatively you can wait! -
Problems understanding open text for access, please help
Hi all,
I'm experiencing some problems with this script, and I think knowing what the error is will help me a lot to understand better how applescript handles access to files.
When i launch this script it tells me somethihng like "document some object has not been opened" (could be slightly different in english).
So, i guess is a problem with openening and closing, but as you can see i open and close the doc, so I shouldn't encounter this problem. Do I?
Thanks for any tip!
set Report to "myfile.txt"
-- in case previously not closed I'll close again
try
close access Report
end try
set the_file to (open for access Report with write permission)
write return to the_file starting at eof
write "test" to the_file
write return to the_file
write return to the_file
close access the_file
repeat with numero from 1 to 3
write numero to the_file starting at eof
write return to the_file
write return to the_file
close access the_file
end repeatEach time your application is run the files associated with it will also be released, so all you need to do is make sure that each open is balanced with a close. This can be done easiest by using a handler that has been tested, so you don't have to worry about leaving something out elsewhere in your script. For example:
on run -- example
set report to ((path to desktop) as text) & "myFile.txt"
write_toFile_("testing one" & return, report)
write_toFile_("testing two, three" & return, report)
write_toFile_("testing again" & return, report)
end run
on write_toFile_(someThing, someFile)
try
set theOpenFile to (open for access someFile with write permission)
write someThing to theOpenFile starting at eof
close access theOpenFile
on error -- make sure file is closed on any error
try
close access theOpenFile
end try
end try
end write_toFile_
Maybe you are looking for
-
How to get FREE copy of McAfee Virex (antivirus) with a .Mac account?
Not sure where to post this, but it relates to my .Mac account subscription so hopefully it's the right place. I've been reading (in online articles) that anyone with a .Mac (aka MobileMe) subscription qualifies for a free copy of McAfee Virex (or wh
-
Second help request: nullValueId and nullValueFlag
Hi all, please someone can explain me what nullValueId and nullValueFlag are meaning ? I would like to add a null value label to a navigation list , but the above properties doesn't display anything. I need a navigation list where the first item is s
-
DB table to get system status and text for PO.
Hi All, I need the table to get system status for a production order and system status text .Please help.
-
Configure restrictions not listed in Apple Configurator?
I work in a school to deploy iPads to be used by 11-16 year olds. Apple configurator seemed like the tool to use, and indeed has proven invaluable in setting up the iPads and deploying applications. The Apple Configurator has a section where you can
-
Cannot upgrade an AP1242 to LWAP using the upgrade tool 3.4
I have installed the tool on an XP laptop. If I configure the tool to use an external tftp server then I get upgrade failed. "Unable to Load the LWAPP Recovery Image on to the AP" If I use the built in tftp server I get a msgbox with "C:\Program Fil