FaceTime Disabled; Cannot Enable

FaceTime is "off," and won't turn on. I can toggle the slider, but it just spins endlessly once I do. It doesn't even report an error, and eventually just goes back to the original "click here to enable" screen. It's not asking me for a username, and it won't let me open preferences. I've deleted (I think) all the .plist files for FaceTime. I've flushed DNS and added open DNS servers under advanced Network Settings. I tried the Keychain fix described in some of these threads. No dice. When I open FaceTime, Console reports thusly:
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
node 1 bus 0 => node 2 bus 0
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
node 2 bus 1 => node 4 bus 0
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
node 4 bus 0 => node 3 bus 0
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
node 3 bus 0 => node 6 bus 0
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
node 6 bus 0 => node 12 bus 0
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime: Events to be updated:
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime: CurrentState:
4/4/12 12:56:34.360 AM [0x0-0xc8dc8d].com.apple.FaceTime:
mLastUpdateError=0, eventsToProcess=F, isRunning=F
I am also getting
4/4/12 12:56:50.000 AM kernel: IOSurface: buffer allocation size is zero
about every 90 seconds, if it's relevant.
Cheers!

I am experiencing the same issue.
Here is my console output:
4/26/12 9:49:00.928 PM [0x0-0xa8fa8f].com.apple.FaceTime: CMIOGraph 0x7f8682cb2c80:
4/26/12 9:49:00.928 PM [0x0-0xa8fa8f].com.apple.FaceTime:   Member Nodes:
4/26/12 9:49:00.928 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 1 [ 1][ 0]: de
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime: sc tinp dal appl, instance 0x7f8682cbd9b0 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 2 [ 3][ 0]: desc tdmx mstr appl, instance 0x7f8682cbd510 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 3 [34][ 0]: desc tufc vtdc appl, instance 0x7f8682cbfbf0 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 4 [25][ 0]: desc tefc vsyn appl, instance 0x7f8682cbd5d0 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 6 [35][ 0]: desc tufc vtcm appl, instance 0x7f8682cc03b0 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 12 [16][ 0]: desc tout 2prc appl, instance 0x7f8682cc3560 O
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:   Connections:
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 1 b
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime: us 0 => node 2 bus 0
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 2 bus 1 => node 4 bus 0
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 4 bus 0 => node 3 bus 0
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 3 bus 0 => node 6 bus 0
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           node 6 bus 0 => node 12 bus 0
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:   Events to be
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime: updated:
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:   CurrentState:
4/26/12 9:49:00.929 PM [0x0-0xa8fa8f].com.apple.FaceTime:           mLastUpdateError=0, eventsTo
4/26/12 9:49:00.930 PM [0x0-0xa8fa8f].com.apple.FaceTime: Process=F, isRunning=F

Similar Messages

Cannot disable or enable Bluetooth with user rights

Hi,
If user do not have administrator rights he/she cannot disable or enable bluetooth using Fn+F5 menu.Is there any solution to this problem?

Still looking for solution....

Sun Cluster 3.2 - WARNING: Cannot enable monitoring on resource-group

clrg online -emM ora-1line-rg(C348385) WARNING: Cannot enable monitoring on resource ora-1line-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-1line-rs' and re-enable monitoring using 'clresource monitor ora-1line-rs'.
(logical host reference)
(C348385) WARNING: Cannot enable monitoring on resource ora-hastp-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-hastp-rs' and re-enable monitoring using 'clresource monitor ora-hastp-rs'.
(hastorageplus reference)
I am able to unmonitor and monitor the resources manually. What is the cause of these WARNING messages? This from Oracle and we have yet to complete the installation of HA-Oracle. Oracle is not installed and tnsnames.ora and listener.ora is not configured. Is this the reason? If so, could someone explain why you cannot online the resource group until after the application has been installed.
Thanks in advance,
Ryan

As the manual says for clrs create:
By default, resources are created in the enabled state with monitoring enabled. so when you issue the clrg online -emM it is just simply warning you that these other resources weren't disable. Note they wouldn't have been started because the RG would have been offline.
Does that explain it? If not, ask more questions.
Tim
---

Cannot enable acrobat 8.1.3 addin in Word 2007

Hi,
I cannot enable acrobat 8.1.3 addin in Word 2007. In Word 2007 I go to the top left circle, word options, Add-Ins, Disabled Application Add-ins, Acrobat PDFMaker Office COM Addin, and then "Go".
I then see Acrobat PDFMaker Office COM Addin is unchecked. When I check it, it notes that "This add-in is installed for all users on this computer, and can only be connected or disconnected by an administrator". See attached jpg for details. Please advise.
Thanks,
Joe

As the instructions indicate, log in as the administrator and activate the option. If you do not have access to the administrator account, then ask your IT folks to do it for you.

Cannot enable aero after turning on (and then off) battery stretch

I have a T520 running Win7 x64. I turned on battery stretch in the power manager the other day, and after turning it off I cannot enable aero again.
I've selected an aero theme, but windows does not turn on aero.
A screenshot of my desktop settings is here - as shown I have a aero theme selected but both appearance and properties tell me aero is disabled.
http://imageshack.us/photo/my-images/440/aerok.png/
I'm seeing a lot of advice on how to disable it but unsure which to follow. As this problem seems to have ben caused by the power manager I was wondering if any others had experienced this and could advise on how to fix it.

I just tried to enable and disable it and it appears it is not reproducible.
I suspect it somehow got confounded by the fact I have a few monitor configurations I use:
1. Work - displayport to U3011 WQXGA and d-sub to a samsung UXGA
2. Home - displayport to adapter to WFP3007 and laptop lcd as secondary screen
3. Road - laptop lcd
I quite often change the order in which I power/suspend/resume and plug/unplug the various monitors and windows (somewhat understandably) throws a hissy fit from time to time. So I guess this was just another case of that

Oracle.xml.sql.OracleXMLSQLException:Cannot enable auto commit within JTS transaction

Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

Clearly , there does seem to be something a bit odd with the above stack.
<Bug:1917808> mentions OracleXMLSave in context of plsql equivalent : dbms_xmlsave . i.e dbms_xmlsave is a wrapper around OracleXMLSave class.
disabling autocommit on connection as follows should help:
conn = DriverManager.getConnection("connect string","scott","tiger");
conn.setAutoCommit(false);
to disble auto commit and see if this has an effect.
This issue might be <Bug:1497506>. If disabling autocommit does not work then it appears that it could be this issue .
Malcolm
Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2

[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.

CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters

Cannot enable location services

I am trying to enable location services in the preferences, but each time i enable them, they magically go disabled the second i leave the page, the list of apps is empty and i cannot enable safari to use my current location as a result of it. Anyone knows how to fix it?

i just found this thread: https://discussions.apple.com/message/16847091#16847091

Cannot enable Admistrative user after already been enabled before

I hope im not alone on this one but wat the hell, i need help asap. My problem is that I cannot enable my Administrative user( the built in one). I had enabled it long tym before, created a password, and then disabled it again just recently. now I can't
re-enable this user account as I need an administrative password. I would have gladly entered the password if there was somewhere I could actually type it in but, no...there was none.
I've tried all three methods but that was for enabling the administrative account without the use of a password or when enabling it for the first time. i cannot install anything and have lots of invaluable information on the admin acc. on the
verge of breaking my notebook. Help Please.

Hi,
Have you tried the option 3 (UI) and option 4 (GPO) to enable it.
How to Enable or Disable Built-in Elevated "Administrator" Account Windows 8 and 8.1
http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windows-8-a.html
Can we get this done?
If there is any difficult or issue during these steps, please post back the detailed status here for further research.
If we cannot get this fixed, we may need to reset or refresh the PC from installation media/image backup to fix the issue.
Kate Li
TechNet Community Support

Cannot enable HDD vibration protection

I disabled the vibration protection and cannot enable it again. I have accessed utilities and the screen to turn it on is greyed out.
I called Toshiba support and they told me to restore to a previous date. No matter what date I choose, I receive an error every time I try to restore.
Any suggestions?

Hi
Which error you receive exactly if you try to restore to an earlier point?
As far as I know HDD proection utility creates also a new service. That means you should also check if the service can be started properly in start > run > services.msc
And as Paolo30 worte you should try reinstalling the application. I dont know which notebook you have but normally you can find everything here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Unable to disable the "Enable Administration Port" (Weblogic 12.1.1.0)

Hi,
I have a Weblogic server installation from which the field "Enable Administration Port" has been checked (Probably the Administration Port is now 9002, but I cannot check it).
As a consequence I am unable to access the Console.
When I try to access the Console through the 7001 port, I get the message:
Console/Management requests or requests with <require-admin-traffic> specified to 'true' can only be made through an administration channel.
Does someone know how to disable the "Enable Administration Port"? Maybe with WSLT?
Thanks and Regards.

Solved. Port 9004 can be accessed through https.

Cannot enable hyper-v in windows 8.1(EFI from bootcamp)

Hi Guys,
I wonder whether anybody has the same issue as me.
Use boot camp assistant to follow the instruction to install windows 8.1 and failed at last step said windows cannot write into boot configuration data something
Find one remediation solution to delete the partition created by boot camp and create it from disk utitlity. everything went smooth and get windows 8.1 installed(Bios), can even enable the hyper-v without any issue
Find another thread talking about EFI boot. So try it with the way(need use gdisk to do some patching and finally need recreate bcd record). windows 8.1 installed without any issue, not sure whether it is EFI boot. But I cannot enable hyper v anymore. after tick the option in windows features and it restart twice and nothing happen. The hyper-v option still remain in windows feature.
Anybody has the similar issue and provide your valuable advice? Thanks a lot.
BTW, the hardware is rMBP 15", i7 2.3GHZ, 16G RAM and 512G SSD

Hi TeddyIsSam
Encountered the same problem on my 27" iMac Mid-2010 (CPU i5-2500s)
I tried for hours/days and could not enable Hyper-V.
If i enabled hyper-v, windows would boot to black screen and could not be repaired without disabling hyper-v.
Found the problem. installing bootcamp from USB with always use latest EFI boot and hyper-v doesnt like it - at least on my old iMac.
Installing windows with old bootcamp style - BIOS emulation (or whatever apple call it) works OK.
non-EFI (or old bootcamp) is when you get 1-2 second of cursor flash in the top left before windows boots.
Unfortunately, i had removed my super drive DVD from iMac... so i could only install bootcamp from USB and this requires EFI boot only.
To remedy this, i used this process which was very,very time consuming, costs $ for winclone and not for beginners
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
However, i can confirm i can now happily run hyper-v with Windows 8.1. great performance. It boots in old non-EFI mode which doesnt seem to have any downside? except the 1-2 cursor flash and i had to manually install latest graphics drivers from ATI as bootcamp drivers we buggy.
Hope this saves someone a lot of time!!!
im assuming later generation Macs happily run hyper-v with latest EFI.

Cannot enable OpenGL

Macbook Air with Intel HD Graphics 3000 384 MB. When attempting to open 3D file Photoshop cc14.2.1 receive error message "Could not complete your request because 3D functionality is currently disabled due to OpenGL being disabled." Cannot enable OPENGL in preferences. What to do besides buy new Mac with different graphics card?

Fortunately there is a way to boost your graphics ram to 512 MB according to this Apple document: Upgrade ram to 8 GB.
About integrated video on Intel-based Macs - Apple Support
Where to buy: Upgrade Memory of MacBook Pro 2011 Models to 8GB, 12GB, 16GB 1333MHz DDR3L

WRT54GS v.6 cannot enable security mode.

hey guys,
I've tried everything, even a firmware upgrade and I've been using IE and I cannot enable any security. anytime I try to select WPA or WEP or anything it refreshes automatically back to "disabled". I've tried multiple resets as well and am extremely confused....this is a new comp. but it seems odd for that to be a problem.
thanks and best,
Adam

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since the last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it. You must setup the router from scratch.
See *** RESET TO FACTORY DEFAULTS *** below, for how to reset your router to factory defaults.
If the above does not fix your problem, then you probably have a communication problem between your computer and router. To fix this, do the following:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
How to do a *** RESET TO FACTORY DEFAULTS ***
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 06-05-2009 03:08 AM

HT4906 I cannot enable Photostream on my iBook though it's active on my iPad - any ideas out there please?

I cannot enable Photostream on my iBook though it's active on my iPad - any ideas?

If your iBook supports Mt. Lion and iCloud and you are correctly signed in to the same iCloud account on your iBook that the iPad is signed into try the following:
Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
NOTE: You mention iBook in your post but your profile indicates MacBook. Which is it an is it running Mt. Lion?
OT

FaceTime Disabled; Cannot Enable

Similar Messages

Maybe you are looking for