FaceTime does not show a missed call when in the sleep mode.
When I am gone I would like to know that I missed a call on FaceTime. It used to show that there was a missed call not now. It was on the screen that you get when u take it out of sleep mode. It's the screen that you have to slide to unlock. That is where the notification used to be. I have updated to IOS 7.1 on an ipad2.
The show on lock screen is the only setting I can find that would make any difference. Try a basic reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. Make sure badge app icon is also turned. If you see you missed a FaceTime call pull down Notification Center from the top of the screen to check all and missed. Another idea, tell your regular FaceTime contacts that if they call and you don't answer they should leave a short iMessage saying they called.
Similar Messages
-
I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback -
My iPhone is showing that I have one unread message but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Declined call, does not appear as missed call in Notification center
When I receive a call in Lock screen in iOS7, with two quick clicks of the Sleep button declines the call, but does not appear as missed call in Notification center. It's a "new feature" or it's a bug?
I want it back like in iOS 5 and 6.We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback -
Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe -
My ipod touch 4th gen does not show up in iTunes when I plug it in. It charges, but I cannot sync it or add new music. I am using iTunes on a MacBook.
Which version of iTunes are you using?
Stedman -
I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in
Please then use your web Browser address http://www.adobe.com/ and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in using the account that has the subscription the one you used above to Activate Photoshop. -
I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone
Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa. -
Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?
when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN -
I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.
-
Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices. -
After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.
Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.
-
i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.
fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...
-
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
HT5312 the forgot security answers option does not show up how do i find the answers
the forgot security answers option does not show up how do i find the answers
You need to contact Apple, either through the link in that article or by phoning them.
(77185)
Maybe you are looking for
-
Get error message when trying to sync through Blackberry Device Manager
During the synchronization process, I get an error message: Error encountered. Error code - 0x80040fb3. Check documentation. This is during the Address Book synchronization. Help...I have no contacts and only a portion of my notes are syncing to my p
-
Itunes stops working when i plug in my ipod 5
ok so i did a restore on my ipod because it was dieing so i plug it back in to itunes to restore a backup then it says itunes has stopped work close program so someone plz help me
-
How to handle all UTF-8 char set in BizTalk?
Can any one let me know how to handle UTF-8 char set in BizTalk. My receive file can contain any character set like ÿÑÜÜŒöäåüÖÄÅÜ . I have to support all char set under the umbrella of UTF-8. But when i am trying to convert flat file data to xml its
-
Deployment problem on glassfish v2
hi, when i am trying to deploy a WAR file on glassfish v2 following errors are coming..... Timestamp Sep 11, 2008 14:30:26.006 Log Level SEVERE Logger javax.enterprise.system.tools.deployment Name-Value Pairs ThreadID=17;ThreadName=Thread-682;_Reques
-
Non-native printer driver would not load
Hi, I have a PowerPC G4 and two printers, an Epson Photo R220 and an Epson C60. The OS is 10.4.8. Several days ago I reset my printing (using the printer setup utility) and then tried to reload the Epson drivers. The drivers from Epson would not load