Facetime failed and Messages not delivered on iPod Touch 4g
When I call someone on facetime it rings for a bit then says "Facetime Failed". I've restored and rebooted my iPod a few times and made sure Facetime is on, but it still doesn't work. Also, my messages aren't being delivered. Any help? Could it be a problem with my internet? This only just started recently, everything was working before..
Troubleshooting help here > iOS: Using FaceTime
And here > iOS: Troubleshooting Messages
Similar Messages
-
My Lightning to 30-Pin Connector will only play music through my iPod dock from my iPod, and will not charge my iPod touch 5th gen. Help me please.
Have you tried resetting the dock by removing it from power? What about resetting the iPod Touch? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
my ipod touch will not play music thru the Bose sound dock and displays the message 'this accessory is not supported by iPod Touch' how can I fix it?
"This accessory is not supported" usually refers to an inability to charge the iPod, but the music should still play throguh the Bose dock. My iPod Touch works this way.
However, when the Bose refuses to make any sound, I unplug it from mains power for one minute. Then plug it back in and try again. This always sorts out the sound issue, but of course, it still will not charg the Touch.
What happens in your case? -
When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software. Is there a bug in the iPod program?
If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.
- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display? -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
I have not used my ipod touch for quite some time and can't get it to sync. message is that my computer does not recognize my device
Try this article and the related articles on the left hand side of the the article:
http://support.apple.com/kb/TS1567 -
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
I have and iPod Touch, and my sister has an iPod touch. Both use the same Apple ID. If I use iMessage, can my sister see my messages?
Yes.
I recommend that you
Create a NEW account/ID using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases. -
my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir -
I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!
Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
Remote procedure call failed and did not execute response after changing contents
Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen -
Not able to send IMessage through I phone 5 and as well as IPad Air. Getting a message stating that message not delivered! Can any suggest to set right this?!
Thanks!
ShivYou need an active Sim with text message capabilities to send SMS messages as they go through your carrier. You need an internet connection to send iMessages to other iOS devices.
If you are connected to the internet and cannot send iMessages, I suggest you sign off iMessage on both iPhone and iPad and then sign back in again.
Make sure your "send from" in settings is appropriate. For example if you have selected send from your phone number and your sim card is not on the phone, this might be a problem, so if you do not want to put the sim back on the phone, then select an iCloud account or other email account to send from.
Make sure the person you are trying to reach has "received at" properly selected on their iDevices. -
Text messages on iphone 5s getting error message not delivered
when attempting to send a text messages on iPhone 5s getting error message not delivered with a red explanation mark. I have filed cases with carrier and it comes back as device, some messages do go thru fine and then it will give the error for several message and then back to working again. Please Help.
Hi
I am NOT trying to be mean or patronizing so my apologies if this comes across that way
That said
SMS texts are sent on a part of the same carrier wave that carries voice calling and conversation as opposed to data - which is why even non smart phones can text - it is the unused portion of the spectrum that initially carriers were making money off of
http://computer.howstuffworks.com/e-mail-messaging/sms.htm
In other words - to be able to text - one has to have a plan that supports that
Also that is why in some plans international texts have a cost whereas one can merrily iMessage from anywhere in the world and get away with it free
So - if the texts are not leaving your phone - chances are that they do not have a channel to do that - that is an AT&T issue
Maybe you are looking for
-
My iPad are synkronised from before, with my old computer.
How do I get all the apps I`ve paid for from before at the same time with synkronising my iPad with another computer? some apps were unable to download because of the settings on my computer. These missing settings or something, make it unable using
-
Can't display PDF file larger than 2Mb
Would like to ask if someone knows that any setting that would allow the PDF file larger than 2Mb be displayed within web browser IE 7, for some strange reasons, the PDF file will stop download at arround 800 some Kb, and I waited for almost 15 minut
-
Last night, I opened iPhoto to find my Library totally empty! I've had problems with iPhoto in the past (crashing and losing some edits like color-correction and cropping upon reopening), so this wasn't a big surprise. I tried to import my iPhoto lib
-
Can't execute java from prompt command. . .
hello! that's the following: I'm trying to execute "java Teste.class " from prompt command and it throws: Exceptio in thread "main" java.lang.NoClassDefFoundError in thread main. The Teste.java file is compiled finely using "javac Teste.java" My envi
-
Contacts does not print out in alphabetical order
Has something happened to printing lists from Contacts? Don't know if it is Contacts or Mountain Lion. I have not printed a listin in ML before, but in former versions, an alphabetical listing was generated in alpha order. Now printing a list gives t