Facetime fails when i connect to caller

I cannot connect to caller when I receive an incoming call or send a call on facetime. get "connecting" message but fails.

Unable to make or receive FaceTime calls after April 16, 2014

Similar Messages

Keep getting "FaceTime failed" when trying to make calls from my iMac

I am trying to make FaceTime calls from my iMac.
So far it has not worked at all. No matter what number I try to call (I am calling people who have FaceTime enabled iPhones), it rings for a while and then I get "FaceTime failed".
Any ideas what it could be?

what happens when you use Image Capture (in your applications folder) and see what happens
LN

FaceTime says failed when I answer a call or when the iPad is answered it says user not available

My husband has been gone for a couple weeks with the iPad. We've been FTing for 2 weeks and then its stopped working. I can hear it ring but when I answer it, it says FT failed. Or if I call him, and he answers it says user unavailable. Now sometimes I hear it ring but there is now way to anwer the call, no window pops up or anything.

Thank you so much! I let my husband use my phone last night and he thinks he pushed it by mistake. Thanks so much for your help Meg!

FaceTime fails with "WiFi Connection Lost"

My Google skills haven't found any matches for this, but perhaps others have seen it in passing at least.
I've noticed recently that I've been having problems with FaceTime calls to a friend of mine. For the past month since he got his iPhone 4, he'd end up losing the WiFi connection, but now it's happening to me, too.
The symptom is that the FaceTime call will be going fine for a while, and then it will just hang with no motion in the picture from the other phone for about 10 seconds, then the phone will beep and display this error:
FaceTime Failed
WiFi Connection Lost
<OK>
At this point, I find that my WiFi indicator in the status bar is gone and replaced with "3G". It has indeed lost its connection to the WiFi access point (a Time Capsule).
Going into the iPhone's settings, I see that it shows there that it is still connected to my WiFi network (showing a checkmark next to my WiFi network name, although it still says "3G" at the top). Cycling WiFi off and back on corrects the problem.
My friend is also using his iPhone 4 connected to a Time Capsule, so we have similar setups. I'm beginning to wonder whether there's some problem either in iOS 4 or the Time Capsule that causes the wireless connection between them to disconnect in an aberrant fashion.
So, anyone else seen or heard of this?

FaceTime connection problems on my iPad2 was magically solved by changing the DNS number (in the Settings > Wi-Fi menus) to:
208.67.222.222, 208.67.220.220
(yes, there is a space after the comma, and a space after the numbers 7)
I recommend that you write down your present DNS number for safekeeping before you make this change.
I hope this solves your FaceTime connection problem!
All the best,
Brad P.

Why does FaceTime suddenly say "FaceTime Failed" just after connecting?

1. I place a Facetime video call.
2. The call rings.
3. The call screen says "connecting"
4. The "connecting" message goes away (this normally happens just before the other party's video clicks on)
5. The call screen remains silent with my webcam on and then reads "FaceTime Failed"
This is a problem. Please help.
Thank you

Thanks Shananigan,
I'll add that to my list of fixes to try tonight. Will that diagnose if it's my setup or theirs?
* Fixes I've tried:
- Restarting my machine (haven't tried both machines yet)
- Software is up to date (running Mavericks OSX 10.9.1)
* Fixes I'll try soon:
- Restarting both machines
- Double check WiFi fan for connectivity
- Try to FaceTime call someone else
* Outcomes
- Restarting my machine only (no change)
- Updating software (software is up to date) (no change)
- Double check WiFi fan for connectivity (PENDING)
- Restarting both machines (PENDING)
- Try to FaceTime call someone else (PENDING)

"FaceTime failed" cannot receive or make calls

I'm on a 2010 MacBook pro and whenever I try to make facetime calls, it immediately says "FaceTime failed" without ringing or anything for all of my contacts. When I receive a call, it rings but it has the same message when I try to accept the call. I've tried everything on the support page and have even changed my DNS to 8.8.8.8 and 8.8.4.4. I also tested it out while tethered to my iphone's LTE and it had the same problem, which rules out network problems.

Hi,
There are many threads here that report people have taken their Mac to an Apple Store and have had the Serial Number "replaced".
However in those cases the Mother or Logic Board had been replaced in a Repair or Refurbishment.
To Reinstall an earlier version of the OS by using the DVD Install disks you would have to Insert them then Boot the Mac from that Disk.
Then you would have to open Disk Utility from the Menu bar and Erase the current OS and other contents before you could run the actual Install.
This does lose everything on that Drive so it is best to create a Back up First.
I am not sure what else to suggest.
8:11 pm Sunday; December 1, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Listener fails when not connected with network .

Hi ,
this again same old problem of listener.
I have installed oracle 8 on my home pc RUNNING WIN2000 SP 4.
The listenet runs fine when I am connected to the internet through dialup CONNECTION but fails when I am not connected .
I donnt have a network adapter with my pc.
How caN i run listener on a stand alone system ?
the computer name is kabilpc
Following error is spitted when I give start command from LSNRCTL80
System parameter file is d:\orant\NET80\admin\listener.or
Log messages written to d:\orant\NET80\log\listener.log
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\O
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
Listening on: (ADDRESS=(PROTOCOL=nmp)(PIPENAME=\\KABILPC\
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=392)(HOST=127.0
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=404)(HOST=127.0
Attempted to listen on: (DESCRIPTION=(CONNECT_TIMEOUT=10)
(HOST=127.0.0.1)(PORT=1520)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown system error
THE FOLLOWING IS THE CONTENT OF LISTENER.ORA
# D:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:d:\orant\net80\admin\listener.ora
# Generated by Oracle Net8 Assistant
PASSWORDS_LISTENER= (oracle)
LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = ORCL))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS = (PROTOCOL = NMP)(SERVER = KABILPC)(PIPE = ORAPIPE))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 9999))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1520))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = kabilpc)
(SID_NAME = ORCL)
(SID_DESC =
(SID_NAME = extproc)
(PROGRAM = extproc)
THANKS
K.M.DHALI

(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =1520))Are these two entries not one and the same? Could you get rid of one of the entries and try.

When my ipod connect to the wifi which is shared by macbook it cant send imsg and facetime, but when it connects to other wifi it would work.WHYYYYY PLS HELP MEEEEE!!!

i tired to change the dns to 8.8.8.8 but still failed.
why.
can somebody help me

- Going to Settings>wifi>connected network and change the DSN to Google's 8.8.8.8
- Using FaceTime and iMessage behind a firewall

System failed when try connecting to internet

hi
yesterday i install arch and everything work fine but
when i tried to make bluetooth connection via network manager(bluetooth)(gnome shell) by click on 'Access the internet using your phone(DUN)' checkbox after Few moments DUN service gone timed out. then i reinstall modemmanager and at last i can create connection via bluetooth(DUN Service) . but when i clicked on connection in connection menu; after few moment system crash and a black screen with a lot Incomprehensible text show and i have to reset computer manually.
anybody can help to me ????
THQ
Last edited by hamidtb (2013-03-29 10:49:59)

WonderWoofy wrote:
This might be one of the more confusing and less than clear questions I have come across here. I don't use gnome or really any of this software that you use. But from what I can decipher above, you seem to have two problems.
First, it is not connecting consistently. In order to fix this, you reinstall the software? Am I reading that right?
Second, once you do get a connection, you experience a kernel panic? This is where the kernel has an oops and cannot recover, so it dumps its contents/errors to the screen. Is this what is happening?
Basically, you need to be more clear about what you are experiencing. It would seem that English is not your first language, but that should not stop you from at least phrasing your question in a way that says more than "I click this" and "I click that". Have you checked your logs at all to see if there is anything revealing there?
hi
thank you for answer
you said right and i so sorry for it; i'm from iran and my first language is persian(farsi)
weak document and support for my language Caused to i come there
yes i reinstall modemmanager package and timeout error disappeared
before my system connect to internet a black screen show and system crashed
also i tried to make a connection via below link but i unsuccess because it not compatible with my arch
https://wiki.archlinux.org/index.php/Bl … GPRS_Howto
is possible if i install another version of linux kernel my problem solved??
where save error log ???

Logon fail when creating Connection in Crystal Reports SP3

Greetings,
I am working on an issue where we have installed the SAP GUI 7.10, Crystal reports 2008 SP3, and SAP IK FP 3.1.
We are testing the access to ECC. We have setup the server in the GUI and can successfully logon to the server in the GUI. We open Crystal Reports, select File -> New -> Standard Report, scroll down to SAP Table, Cluster, or Function, and the SAP System Logon window pops up.
Select the ECC system, click Next, and input the logon info for the system. Click Next and do not check the box for generating a RFC trace file, then click finish.
This results in a new window popping up. The title is Crystal Reports, and the contents of the window are as follows...
Logon failed.
Details: <bunch of Chinese characters>.<more Chinese characters>
We are using the language setting of EN on the SAP server, and in the GUI configuration. Not sure why we are getting Chinese (we have verified it as Chinese with a person here who can read some Chinese. he says that the first part is "something about server not valid")
We asked a user who does have a working install using CR 2K8 SP2 and SAP IK SP2 to try the login and he had the same results on this system.
We can use the same SAP account to login to InfoView without an issue.
Any suggestions?

i had the same problem.
it has something to do with the sap gui logon settings.
1. go to your SAP logon ECC-properties (start sap-logon; right-click on your ecc connection)
2. go to the Codepage-Tab
3. set Language to default (standard)
then it should work.
br
thomas

Flex application works locally, fails when online (connecting to PHP script to insert row into DB)

Hi everyone,
I've got a Flex application that works wonderfully when I test it on my machine locally. It uploads files and send variables to a PHP script (that inserts them into a DB) with no errors when I run it locally. As soon as I put it online, the upload continues to work but something between my Flex application and the PHP script fails because no data is committed to the DB. I know the PHP script works fine - not only does it work when I run the Flex application locally but when I go directly to the PHP file online, a new empty line is added to the DB.
I initially thought that this was a cross domain issue so I added the following to the root of my hosted account:
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="*.MYURL"/>
<allow-http-request-headers-from domain="*.MYURL" headers="*" secure="false"/>
</cross-domain-policy>
I based this off of what I found online which seems to have done nothing for me. I'd also be happy to provide an error message but I don't get one when I debug.
Any thoughts would be greatly appreciated.

Use a network monitor to see if the Flex app is truly requesting the right URL.
-Alex

Why won't my facetime ring when I get a call

I can not tell when someone is trying to facetime. My ringtone doesn't work correctly.

Do you have sounds turned on for these types of notifications? Also, if you have notifications turned on, do the sounds show up in the Notifications settings area for the particular apps?

I have an iphone 4 and recently ive been trying to use facetime but when it connects it hangs up before i can even see a face

I need help seriously. I have turned my phone off then on I've reset it by using the home and power button idk what to do I'm really getting mad at my phone. I know stupid first world problems :(

Maybe updating iOS to 7.1 will fix it.
<http://www.macrumors.com/2014/04/17/ios-6-facetime-issues/>

Facetime gets "FaceTime failed" error on Macbook Air

I have a Macbook Air with os x 10.9.2. I recently updated the security. Now my Facetime rings but I get a "FaceTime failed" error after trying to call. The receiving FaceTime does not even get a ring, and I don't get a ring when they call me.

Try this support article > FaceTime for Mac: Troubleshooting FaceTime

Facetime: I am having trouble getting on Facetime. It keeps saying Facetime Failed.

I am having trouble getting on Facetime. It keeps saying Facetime Failed.

Are you connected to wifi
do you have factime turned on?

Facetime fails when i connect to caller

Similar Messages

Maybe you are looking for