Facetime iphone 4, other users cannot hear me

When calling or receiving a call facetime works fine and we can see each other and I can hear the other person.
However, they are unable to hear me. This has just recently started. All settings fine, nothing has changed since when it was working.
I have also confirmed that my mic is working and mute is turned off.
Any ideas?
Thanks

This is happening to me twice a week or so. I can hear other party, but they cannot hear me at all.

Similar Messages

My iphone, the other party cannot hear

Can i get the feature fixed? the other party cannot hear on this phone

I have te same issue. It started after upgrading to iOS 5 on my iPhone 4. I tried to restore, same problem after restore.

IPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

iPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

Alex, thanks for the reply but it did not answer my question. I only want to turn off notifications & interruptions while I am on the phone. For this desired result, the only way the Do Not Disturb feature would help is if I manually turned it on before each phone conversation. Since my phone rings at random times, this is not possible. Basically, I just want to "opt out" of call-waiting. When I had a landline I never had call waiting. I don't want to be interrupted. But beyond that, even if I am being interrupted why are these notifications preventing the other party from hearing my voice?

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... What should i do. I have now resulted in using another phone as i cannot operate like this...

Hi i am also having problems with a crackling speaker on calls every few calls. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... I will watch to see what advice you get.

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue.

The other party cannot hear me talking when i make a call on my i-phone 4s

the other party cannot hear me talking when i make a call on my i-phone 4s but can hear me if i use the ear piece

http://support.apple.com/kb/TS2802

When making a cellular call the other person cannot hear me. FaceTime + Skype Work OK!

Hi Guys,
I have an iPhone 4 (non 'S') 16GB Black.
I have the most strangest problem I've ever had on iPhone (I've had every gen so far).
Here is the problem:
I make a standard cellular call and the other person is not able to hear me. If I make a FaceTime call though, the person can hear me no problem. I tried Skype too and that is OK also. So I know the microphone works, just not over cellular network.
I tried the sim in another iPhone I have access to. (iPhone 4S) and calls work fine on that one. So I know it's not a network issue.
I'm absolutely stumped by this issue.
I have tried the following:
Backing up my phone, entering DFU and re-setting back to factory, then restored from backup. It worked for a little while (maybe a week?) then the problem happened again.
I backed up my phone again and did the DFU reset but instead of restoring from backup, I ran with a vanilla phone for a while - this time it didn't last 2 days before it went silent again.
I have since DFU'd and Restored my phone 3 more times again but it has not cleared the issue this time - the problem is now constant it seems.
Over the past 3 months, I have restored, reset my phone to get rid of the problem many times, each time with different results. Sometimes it works for a while, other times it doesn't fix the problem.
It sounds hardware related but I keep coming back to the thought of "well if it works in FaceTime, it can't be hardware". But if it's not hardware, what is it?
Any help on this one is very much appreciated.
P.s. no, it's not muted

no setting need to be changed. you may try these steps http://support.apple.com/kb/ts5180

TS3367 PEOPLE WHO I FACETIME CAN SEE ME BUT CANNOT HEAR ME.

I am having trouble with the audio on facetime. I can hear and see folks I facetime. These folks can see me BUT they cannot hear me. what do I need to do?

I saw one post where the user said that dust got in the Mic hole. Vacuumed it and restored the audio.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
 Cheers, Tom

My 4s is having a problem with person on the other end cannot hear me or my voice is garbled. I have to hold the phone in a very specific place to my face for them to hear me.

For about two months my iphone 4s has been having problems with people I call not being able to hear me or understand what I am saying. I can get them to hear my by adjusting the position of the phone on my face, it is a very narrow space and I dont get it just right the receiving party cannot hear me.
I have read similar discussions with no real fix to the problems. I have cleanout every orifice of the phone, turn it off and on, reboot to no improvement.
Any other suggests.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

When I call out on my iphone the receiving party cannot hear me, if I use earphones they can. Is there a fix for this?, when I call out on my iphone the receiving party cannot hear me, if I use earphones they can. Is there a fix for this?

When I make or receive calls on my iphone 4S the receiving party cannot hear me unless I use earlphones is there a fix for this?

Hello Fred91
Start your troubleshooting with the article below to go through and help isolate the issue with your iPhone.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Regards,
-Norm G.

After connecting my blue tooth it works for a few incoming and outgoing calls. Then for no reason when i make a call the other party cannot hear me and even if i try to click on the speaker phone or hand set they cannot hear me. rebooting required

Blue tooth operation and lock up. After i connect my bluetooth it works fine foe a few calls. Then if i place an outgoing call, I cannot hear the reciving party but they can hear me. Other times i can hear them but they cant hear me. After rebooting the phine it works again for a few calls. This is consistent with 2 diferent blue tooth devices?

Sorry about the delay, I have been away from my computer for a couple of days.
Since you are able to use Siri and dictate notes, that indicates the mic itself is working.
I would suggest fully quiting the Phone app and resetting the iPhone.
Double click the Home button (bottom center of the display with square icon on it) to get the fast switcher. Press and hold on one of the icons so they start "shivering" and the red "-" icons. locate the Phone icon and press the red "-" on it. Then press the Home button again to stop the "shivering".
Then Reset the iPhone, press and hold the Home and Sleep/power (top right edge of iPhone) buttons until you get the Apple logo. Wait for it to finish restarting and then test again.

I have a application installed in my apps folder but others users cannot see them

I installed an app on my imac using OSX Lion. The app is in the application folder of the admin account. The other standard users cannot see the app. Is there a way that they can use the app and see it in the application folder when they log in?

Then move it into their application folders as well.

Lock the plant so that other user cannot use the same plant.

Hi Gurus!
I ahve this small report which shows the pro-rate factor . In this report I need to block the plant or lock it(a soft) lock witha message that some other user is using the plant so that other cannot use the same plant to post.Following is the report and if soemone can help me out would be very kind enough.I ahve added teh code where validation of plant is doen , so it must be somewhere here the locking should be done as per my thinking . Kindly suggest please.
*&      Form get_pro_factor
*       get pro rate factor from the given
*       combination of plant/sloc/mat#/period
form get_pro_factor .
select single zpr_factor zpr_disp_factor zpr_pipe_net zpr_pipe_gross
from zprfactor
into (zprfactor-zpr_factor, zprfactor-zpr_disp_factor,
        zprfactor-zpr_pipe_net, zprfactor-zpr_pipe_gross)
where zpr_werks = p_werks    and
        zpr_lgort = p_lgort    and
        zpr_matnr = p_matnr    and
        zpr_mjahr = p_mjahr    and
        zpr_monat = p_monat.
v_subrc = sy-subrc.
if zprfactor-zpr_factor = 0.
    if c_wp = p_lgort+0(2).
      zprfactor-zpr_factor = 1. " Don C added this routine
    endif.
endif.
if zprfactor-zpr_disp_factor is initial.
    if not zprfactor-zpr_pipe_gross is initial.
      zprfactor-zpr_disp_factor = zprfactor-zpr_pipe_net / zprfactor-zpr_pipe_gross.
    endif.
    if zprfactor-zpr_disp_factor is initial.
      zprfactor-zpr_disp_factor = 1.
    endif.
endif.
endform.                    " get_pro_factor
*&      Form valid_plant
*       validate whether plant entered in selection screen
*       exists in database or not
form valid_plant .
if not ( p_werks is initial and
             p_lgort is initial and
             p_matnr is initial and
             p_mjahr is initial and
             p_monat is initial ).
    select single werks from t001w into t001w-werks
           where werks = p_werks.
    if sy-subrc ne 0.
      message e048(zmm) with p_werks.
    endif.
endif.
endform.                    " valid_plant
*&      Form FIND_MATKL
form find_matkl .
select single matkl into v_matkl from mara where matnr = p_matnr.
endform.                    " FIND_MATKL
*&      Form UPDATE_ZPRFACTOR
form update_zprfactor using p_flag.                         "DEVK903224
call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    select single * from zprfactor where zpr_werks = p_werks
                                   and   zpr_lgort = p_lgort
                                   and   zpr_matnr = p_matnr
                                   and   zpr_monat = p_monat
                                   and   zpr_mjahr = p_mjahr.
    if sy-subrc = 0.
      zprfactor-zpr_rate_flag = p_flag.                     "DEVK903224
      update zprfactor.
    endif.
endif.
call function 'DEQUEUE_E_TABLEE'
    exporting
      mode_rstable = c_e
      tabname      = 'ZPRFACTOR'.
Thanks
Aarav

call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
ENQUEUE_E_TABLEE   } E_TABLEE is the name of the lock object, it starts with character "E".

New HP Pavilion, shared printer, other user cannot print

Have just purchased HP Pavilion G6 with OS windows 7.
have set up to network sharing a printer, I am administrator.
Printer is Brother MFC-240C
other user on network has a desk top built by local company - non specificbrand - and is running windows XP.
we have successfully shared printers in past when I was using a desktop with windows XP
question is: is the fact that we now use different OS causing the problem with printing?

Hi @78Senior,
Welcome to the HP Forums!
I noticed that you cannot print from Windows 8.1 to your HP Deskjet f4180. I am happy to help!
I would recommend to go through this printer is offline guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8. When you get to solution four make sure to select USB and follow the steps there as well.
Hope this works!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Alll of sudden the other person cannot hear my voice,...

All of a sudden the other person on call cannot hear my voice through normal phone , but when i used my headphones , he was able to hear clearly,...
whats the problem ???/

Have you replaced your SIM card?
I would suggest the following steps:
Reset your network settings.
Replace your SIM card or try in another device.
Restore your phone.

Facetime iphone 4, other users cannot hear me

Similar Messages

Maybe you are looking for