FaceTime issues since iOS upgrade

Held ever since the "upgrade" face time has frequent poor connection. And loses connection constantly, previously this was fine, when is this be sorted is a real upgrade due shortly?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
You may be losing wifi connection.
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

IPad AirPlay issues since IOS7 upgrade

Hi all
Since the last ios7 upgrade i've had nothing but trouble with my AirPlay set up.
I have the following set up:
HP ProLiant N40L server running iTune server (latest build)
BT HomeHub 3 / TP Link TL-PA211 WiFi extender
iPad 3rd geneeration
iHome iW1 AirPlay speaker
Before the upgrade i would get some intermittent issues, but eventually after iPad restarts i could get AirPlay working. Since the upgrade 90% of the time my iPad will not see any AirPlay devices whatseover. After a reboot of the iPad (or more) it eventually sees the Airplay speaker. iTunes however on my server always sees the AirPlay device and has no problems whatsoever connecitng to it (please bear in mind that this is still on the same WiFi network).
On the occassional 10% that my iPad does see an AirPlay device, I connect, and then almost immediately the AirPlay device dissappears from the iPad.
I've spent 2 weeks now trying to sort the issue out. As my iTunes can see the AirPlay speaker without issues and play to it, I'm assuming it's part of the ios update.
Anyone got any suggestions, as i'm ready to throw in the towel?
Thanks
Simon

Hi
First, before you lose interest - I have a solution that works so well to get BT Home Hub 3 working with 'Airplay' and Apple TV and my iPad 4, that I am so far unable to 'break' it. Please do try to break it yourself, and could you report back here or mark it with stars or whatever so I know what happened in someone else's setup?
I appreciate what you are going through, all I wanted to do was get 'Real Racing 3' running for me and the kidz on the TV that is attached to Apple TV box. Sometimes the Airplay icon appeared, sometimes not, it was chance - really frustrating.
The nub of it is this - you 'reserve' certain aspects of how the HH3 services the wifi network, so it directs data/communications via these 'reserved' ports specifically assigning them to the purpose you need - in this case, 'stuff' (technical eh?) going to the Apple TV so that Airplay works.
Apple forums somewhere list these publicised ports, and you go into HH3 management (tap in the IP address of the hub in 'safari' to get there, then put in your password for admin - it is 'admin' if you didn't change it already). In short, you use one of the games/applications that already are in the list for 'Port Forwarding', and I modified the name of a new one I made to make it like 'Airplay attempt using BT alarm' or something, because I 'copied' the BT safe alarm app details to start my custom one off. Lost yet?! Go into the HH3 manager, go to the A-Z I think it might be in 'advanced' and get 'Port Forwarding' up.
Ok, here's the things to set - if you peruse the apps/games they already list in HH3 for this sort of thing, you will see entries under 'TCP' or 'UDP' headings, and it's these sort of things we want to reserve. I only set the single specific addresses (it's just a number to you and me) that were listed on the Apple site as being to do with Airplay:
There are only 2 bits to set - you hit the button on screen in HH3 manager, to 'add entry', then select in the box marked 'protocol' that you want TCP or UDP according to the info I dug up from Apple site below - don't worry it is not complex to do you are just editing a couple of figures on a thing you don't use. Incidentally, I left the first two entries as they were (1024 was in there already) because I am just timid! So set it as below.
TCP 1024 -
UDP 1024 -
TCP 80 80
Any 123 123
TCP 443 443
Any 554 554
TCP 3689 3689
UDP 5353 5353
I took a pic of mine, for records, and this is what is in that pic. You have to enter the self-same number (eg 123 as above) no less than 4 times, this gives the results above.
On the bottom right, there is a button that says 'apply', so you hit that and it saves this new-fangled custom designed list of reserved ports/addresses for your 'Airplay BT alarm' or whatever you called it. THEN YOU MUST ASSIGN THIS CREATION OF YOURS TO A DEVICE - THE APPLE TV.
That's the basics of what I did - I have since restarted the BT HOMEHUB 3 several times, the Ipad 4 several times, the Apple TV has updated its software and has been restarted twice. STILL AIRPLAY WORKS.
So, I am reassuringly presented with the Airplay icon whenever I 'upswipe' on my ipad from the bottom of the screen - iOS 7.1 is on my ipad obviously, but that did not change the hit-and-miss of the Airplay icon until I made these mods to the HH3.
Over to you - try and break my solution please, and let me know if it works for you as well, or not. All I know is, Real Racing 3 can reliably be brought to bear on the Apple TV thing, and the Airplay icon is now never missing.
One more point - I think I also set the Apple TV IP address to be static - my ipad has had this situation for some time, along with the 'lease' set to a couple of weeks or something, so it does not try to select a different channel for wifi frequently? PLUS, I set something in the ipad I think, long ago (did not affect this issue as far as I can see), so that when the ipad 'wakes up' it does not decide to search for a better channel or IP address or something - that caused loads of glitches it seemed, then I found out my BT HH3 was on the end of dodgy phone cable not hi-quality shielded...but hey, that's a different bucket of bolts.
Good luck and let me know an outcome please, best to all.

IPad not recognized by iTunes on MAC computer since iOS upgrade to 7.0.4

since i upgraded to iOS 7.0.4 keep getting "The iPad “LOUANN BRIZENDINE’s iPad” cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes but cannot find how to download 11.1 iTunes onto

Which OS X is currently installed on your Mac?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.

Issue since iOS Update with TomTom Carkit

Hardware:
iPhone 4, iOS latest Patchlevel
TomTom Navigation CarKit with integrated Speaker, GPS and Bluetooth connection
I have got the following issue since the iOS Update to 6.x
integrated CarKit Speaker is no longer in use=> After receiving an Email with notification signal the speaker becomes active => Makes the usage of a Navigation Software a little more complicated without spoken notifications
Continuos Bluetooth Connection loss to the dock, sometimes followed by the message: Charging with this device is not supported! Could only be solved with undocking/docking the iPhone => complicated during driving on a motorway!
Some apps are no longer able to start (mostly games for my kids).
Has anyone an idea?

Have you contacted Honda? Is there a firmware update for the car system?
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Sometimes an iOS updates breaks compatibility and y have to air for a firmware update to the car system or iOS update

Issues since iOS 8.3

Hi Everyone - has anyone else had to endure the following since iOS 8.3?
iPhone 5
1) Since the update, my iPhone 5 sometimes tries a reboot mid charge but locks up and I have to hold down the home and sleep button to coax it back into life.
2) Since the update, I cannot connect my iPhone 5 to my laptop without the a warning from the laptop about USB power surge meaning I cannot charge or sync to/from the laptop.
iPad Mini
1) Random rebooting
2) Freezing
The iPad issues are a tad frustrating but live-with-able. The phone issue is a stress, particularly the inability to charge/sync, as I use the camera for work and I used to rely on charging the phone on the move with the laptop if I was working offsite. Wish I could turn the clock back and not update or hope that 8.3.1 appears very quickly and the problems are chalked off. I don't see why I need to purchase a powerpack for charging on the go when it worked perfectly until this iOS update.

My iPhone 6 is acting weird on charging. It started when using an external power battery. No charging with it. Then I tried the Apple charger and cable. No way. Battery went off. iPhone shut down. I tried a recovery. It seemed all was ok again. After hours restoring my backup. Then I tried another external battery. Again the same situation. So it seems that Apple did some software barriers to avoid third party batteries.
Before ios 8.3 at least there was a warning about not supported chargers. Now it the worst situation, as one has to recover the whole system.
Contacting Apple care tomorrow....let's see.

POE 3560 Issue after IOS upgrade

Hello,
I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
res
Paul

c3560-ipbase-mz.122-25.SEE2.bin
You upgraded the IOS to the switch? I shudder at the thought of what old version did you upgrade FROM.
Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
You've got more than enough PoE left.
Only two things comes to my mind:
1. Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
2. Hardware failure - Read THIS.

ICal/Google sync issues since iOS 8.2 update

Since the update to iOS 8.2 a few days ago, iCal on my iPhone 5s is not syncing with my Google Calendar. I have already reset the 2 step verification on my Google calendar permissions, checked to make sure events are in the Google calendar and not in the iPhone calendar, and checked settings to make sure the Google calendar is selected. The only thing I have not tried (because I'm worried that changes I made prior to realizing thisi was an issue would be lost) is deleting my Google account from the iPhone and reconnecting. Is that really my only remaining option? I'm stumped.

I'm facing the same issue on iOS 8.2 iPhone6. iCal is not syncing on the iPhone. It does, however, sync from Yosemite to iCloud.com.

No music since iOS upgrade?

My Macbook pro wont play music since I upgraded. It has an exclaimation mark beside each track and when I click to play it says it cannot locate files. Anyone able to help?

charalex wrote:
Sorry - My itunes wont play music. Bit confused about MBP not running IOS software - new to this whole world of MBP.
iPhones, iPad and iPods run iOS. Mac's run Mac OS.

My iPad 2 has suffered performance issues since iOS 8, any tips on how to alleviate or fix issues?

I bought an iPad 2 at launch and have been a happy customer for the last 3 years. Unfortunately since iOS 8 my iPad 2 has slowed down considerably and sometimes doesn't even play videos. I'm sad to say this but it's pretty much become a paper weight. It's frustrating as I was expecting to be able to surf the web for the next few years. however, I am beginning to feel like Im going to be forced to upgrade to a newer model just to maintain the same performance my iPad 2 had when I first bought it 3 years ago. I feel that it's ludicrous to expect to have to upgrade every couple of years just to surf the web.
Are there any tips to improve iPad 2 performance? Should I roll back the update(Apple doesnt recommend this but it's an option?) should I just wait for Apple to optimise iOS 8 for older hardware?
regards,
Dylan

Hi ..
There's no need to upgrade. Try resetting ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
And try the tips mentioned here > 5 Tips to Speed Up Your iPad (skip number one)
No data is lost due to a reset.

Various issues since Leopard upgrade

I have just installed Leopard on a Dual 2.7 G5 with a 500GB Hitachi HDD and 5GB RAM and I have noticed one or two niggling little 'quirks' (I am lumping everything together here, rather than separating them in to more appropriate sections, so that I have a record of everything together).
1) I have an Epson Perfection 4870 scanner which I cannot use to scan directly from applications (for quickness I mainly use Preview) as the 'scan' button is always unavailable (greyed out, not highlighted in blue). This has been an issue since at least 10.4.8, so it's not a problem exclusive to Leopard, but it's extremely annoying nonetheless. As I can scan directly from the Epson Scan software (which is basically the driver) Epson will not assist me further and have directed me to Apple/Adobe/MS, etc., for support. Prior to 10.4.8 (IIRC) I could select 'import' (from whatever application) and it would automatically preview, the scan button would then become available and hitting it would launch the driver software. However, the link between the applications and the driver seems to have been severed somehow/somewhere and it is no longer recognising that the unit has finished its preview in order to make the 'scan' button available for the next part of the process.
In Tiger, I could also scan into Epson's EasyScan application, but have been told this isn't 10.5 compatible.
Does the above make sense...? Has anyone else experienced this - and have you solved it? If so, how?
2) This next bit concerns the Dock. I like to have it hidden along the left hand side of the screen, rather than at the bottom, because I only have a 17" panel and desktop space is at a premium. However, about one restart in five, it's back along the bottom and any icons or folders that I have added to it have gone AWOL.
3) The third issue is a sound issue. I have a Revolution 7.1 card which I understand, from reading a notice on M-Audio's Web site, is not yet Leopard compatible (though the promise it will be "very soon"' though as the last driver release didn't support anything newer than 10.4.6, IIRC, I'm not holding my breath!)
So I have removed the card and plugged my Logitech Z5500s back into the 'on board' card. This was working flawlessly under Tiger (I know because I tested it to make sure, because I knew that the Revolution wouldn't function under Leopard). However, whatever I try, I only seem to hear sound from the internal speaker; I even replaced the optical cable (at great expense - the original was a Belkin Gold Series, and so is the replacement and, at about £35 a pop, it's not a trivial outlay). Everything in the sound sys prefs is completely 'greyed out' so I cannot change it from the internal speaker to anything else. Whilst there is nothing on Logitech's Web site as regards to the Leopard compatibility of any of its products (it seems that it gave up on the Mac a very long time ago; I use a MX510 which was the last of their rodents to have any kind of OS X support and that stopped with 10.4.4, IIRC) I cannot see how a set of speakers, which should work with anything that has the required jack sockets, can be fussy about an OS. Incidentally, I also have a 'dark side' box running XP Home (when I win the lottery, I'll buy a Mac Pro and dispense with it) and they're plugged in there and work fine (via analogue, though, not digital).
I noticed it when I received some CDs that I'd ordered from Amazon the other day and found that iTunes was playing through the internal speaker.
4) The final issue is a networking issue. Under Tiger, I could (though it did take me some tweaking to get it working smoothly) dump things from the G5 on to the Windoze box and vice versa, without too many hiccups. However, Leopard is proving to be somewhat of a challenge, to say the least. I don't know how I managed it, but I did manage to render the machine completely inoperable at one point (it would only boot as far as the grey 'Apple logo' screen and I couldn't open the optical drive to stick the DVD in - a panicked phone call to a friend, who runs his own Mac repair and consultancy business, followed!
I don't understand SMB and AFP (though I do know about FTP). In the Finder, I can see the 'doze box and can send things to it (though should I be connected as 'guest'?) but there is nothing on the Windoze side, save for 'Printers and Faxes'). I have made sure I have permissions set correctly and everything is set up to share (and Windows sharing is on) but there is nothing on the other box at all.
Is it possible to share the main HDD across, or am I limited to this silly 'Drop Box' thing (which I did have available under 'doze at one point, though it was read only and I couldn't change permissions from Leopard because I didn't have sufficient privileges, even though I have an admin account and I could change permissions under Tiger with the same level of 'clearance'.)
4) This final issue is sort of linked with 3) as it concerns what I believe to be erroneous error messages. I was clearing some stuff off a drive I was going to use for Time Machine[1], but I wasn't allowed to delete most of it because 'XYZ was in use' or open in an application. Six reboots later, I was still receiving the same error; strikes me that Leopard's got its knickers in a knot somewhere along the line because the files in question (mainly old Word and Excel docs) were certainly NOT in use as I didn't have either installed at the time!
[1]Though having read the problems people are having with TM (not just here, but on other forums I read/post to) I think I might give it a miss and stick with ChronoSync (just have to wait for it to be compatible).
So, this is actually the second installation, but the problems remain - any help out there?
Sorry for the verboseness of this, but I wanted to make sure that I'd covered everything. I'm almost tempted to reinstall Tigger (but not quite - I like Spaces, and I like the Dock Preview).
Cheers for any assistance, folks!
Fran

Fran, I'm not sure I'm going to be much help for all your problems but I will attempt to answer what I can.
1. Scanner problems - have you tried reinstalling the software? I know you mentioned that the easyscan software is not compatible but it sounds like the driver software isn't in the right place. Optionally another program that you might want to look into is vuescan. I have had good success with the program in the past but I have yet to try it under Leopard.
2. Dock problems this sounds like either a corrupted preference list. But I don't have a clue as to why it might be reoccurring. Have you fixed permissions on your computer since installation?
3. I don't have a clue to figure out how to fix this issue.
4. Networking - As for sending things to the doze box. You don't need to be connected as guest. Just use the username and password that you use when you sign into the windows to sign into the windows box and you should have the same rights as you would as if you were using windows on that computer. Yes it is possible to share the main HDD but it isn't something that I would recommend. What I do recommend is creating a folder where you have both read and write rights to and then use that folder share items across both computers. If this isn't something that is going to work for then at the most I would just share your documents folder. You didn't mention how your trying view information on the windows side you should be able to browse your network and eventually find and see the mac.
4 (part 2) - I would recommend something besides TM, it is designed to recover lost/accidentally deleted files. And isn't really designed for being your complete backup program. Yes, you can use it for that but I would recommend something more robust. Some of that comes down to how you want to define your recovery strategy. Superduper!, promotes themselves as having the ability to boot for your backup drive and being able to almost immediately get back in business. If this is a critical factor to you then I would lean in that direction. If you are just worried about having a backup of critical data files then Chronosync or some other program will work just as well. Also mentioned in your post in this paragraph is a description of "files in use" problems. A couple of things come to mind did you let spotlight finish indexing your drive before you tried deleting files? I've run into a problem similar to this in Tiger when I was deleting files while spotlight was indexing.
One item that you didn't mention was what kind of installation you did when you installed Leopard. If you didn't do an 'erase and install" then that might be something to look into. First back up your computer before doing this. You might also want to run a permissions fix on your drive to see if that helps at all.
HTH
Paul

Google and ICal issues since Safari upgrade

After we recently upgraded Safari, when I add an event to my google calendar or to my ical, which are synced, it shows up twice on the ical calendar. This only happens for my events--no one else's in our family. I am the main person on the account. Also, we are not able to see Google Calendar on safari since we upgraded.

I am trying to publish my google calendar of events onto my web page. In Firefox the calendar displays and all events show up fine. However, in Safari, my google calendar shows up but none of the events are displayed. I have checked & double checked that the sharing settings are correct in google calendars!! I've even made sure to empty all cashes Can anyone help me understand why it works in Firefox but not with Safari??

Microphone issue since ios 5.1 upgrade

hi all,
my iphone worked perfectly on ios 5.0.1.
since i have upgraded something has happened with the microphone which means the only way i can get anyone to hear me is to talk directly into the microphone.
if i hold it to my ear nobody can hear me.
anyone else have this issue, and what is the fix?

Do you have a question?

Guided Access in Facetime gone since iOS 8 ?

SInce my update to iOS 8 it is not possible to enter Guided Access mode whilest in a Facetime call.
is this a problem with my iPad, or a new setting in iOS 8 ?
This option is particularly usefull to facetime with my child to my parents.
The kid is too young to understand the concept of a touch screen, and keeps pushing the noses of his grandparents on the screen :-)
And of course the red button when it appears, ending the call...
Can teh guided access mode please be re-enabled for a facetime call ?

Unfortunately yes.
I Have same issue . Spent almost 1 hour with Apple care support . Interestingly I was told that Apple disabled this feature on iOS 8 while you are in regular or face time call . Yes you are hearing it right . You can no longer be able to enable guided access while you are on any type of call. I repeatedly checked with senior tech support person and she has some internal notes that it is willful change from Apple and not a bug .i wonder why Apple would do such kind of things . But hey, it's Apple . There should have seen something that would have forced them to disable it . But unfortunately it's hurting me bad . I can longer give my phone to my kids for a face time call with their grand parents . Poor grandma . They are gone miss their grand children. my iPhone is going to be no more part of my family . It will be just my personal device for good .
there are some tricks here which you might want to try . I tried all of them with no luck

Touchscreen issue since IOS 5.1

Is anyone else having problems with the touchscreen since installing IOS 5.1? It seems like the calibration is off.
I am also unable to install apps. Ive tried restoring and soft resets but nothing seems to work.
Am I the only one? or does anyone know how to fix this?
Thanks

Sorry -- no fixes for you but I, too, am experiencing this problem with my iPod Touch 4th gen. I even did a restore and reinstall from iTunes to see if there had been in installation issue (I had an installation issue over wi-fi where the Apple logo appeared with an empty progress bar for most of an hour). After a couple of re-boots it finally kicked in but with the touchscreen issue. The restore didn't resolve anything. Kinda got a gut feel like the updates for the Ipad 3 screen resolution is what is causing the problem on the small screen of the iPhone/iPod. My iPad 1 isn't having any issues. I don't know if my wife's iPod is problematic or not. Both her iPad 1 and iPod 4 were updated last weekend but haven't heard any reports.

FaceTime issues since iOS upgrade

Similar Messages

Maybe you are looking for