Facetime not ringing on sleep mode? how to make it ring on sleep mode on my MBA

my facetime does not ring on sleep mode? how make it ring on my MBA on sleep mode?

COnnect your iphone to your computer. Once itunes detects your iphone it will ask you if you want to restore and update. Click on that and follow the dirction

Similar Messages

  • Is there additional ring tones? or How to make custom ring tones?

    Hi,
    I am thinking about adding additional ring tones.
    Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
    or
    Can I make custom ring tones by myself?
    If there is an application to do the ring tones, pls anyone let me know?
    thanks

    Hi San,
    Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
    Here we go :)
    PCM File Requirements for Custom Ring Types
    The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
    •Raw PCM (no header)
    •8000 samples per second
    •8 bits per sample
    •uLaw compression
    •Maximum ring size-16080 samples
    •Minimum ring size-240 samples
    •Number of samples in the ring is evenly divisible by 240.
    •Ring starts and ends at the zero crossing.
    •To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
    Configuring a Custom Phone Ring
    To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
    Procedure
    Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
    Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
    Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
    Step 4 Save your modifications and close the Ringlist.xml file.
    Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
    There is a nice little Step by Step here;
    http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
    Or search sites like this one;
    http://www.adman.net/cisco/ringtones/browse.asp
    Hope this helps!
    Rob
    PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

  • Nokia 5610 - how to make calls ring only on headph...

    Nokia 5610 - how to make calls ring only on headphone and not on phone???
    Could someone help me out please??? I tried everything... Nothing works!!!

    Surely if you put the phone on silent and connect the headphone? That works on mine.
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

  • My ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

    my ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

    Google "DFU mode", put it in that mode and Restore it in iTunes.
    And stay away from jailbreaking.

  • HT201263 my phone 4s is in restart mode how to make ready

    my phone 4s is in restart mode how to make ready

    pradeep89 wrote:
    my phone 4s is in restart mode how to make ready
    What exactly is restart mode?  make ready for what?

  • How to make a ring-type colorbox selector

    Hi,
        How to make a color selector as shown in the attached pic and vi? I have thought about using ring control, but I couldn't put a colorbox as the item inside the ring. Someone familar with this?
    Thanks.
    PS: attached vi is for Labview 5.1.1, I want to rewrite in labview 2010.
    Solved!
    Go to Solution.
    Attachments:
    resistor decoder.vi ‏108 KB
    Resistor Decoder.JPG ‏32 KB

    If you need future upconversion there is an Upconvert Requests Thread that you can use. There is also a corresponding Downconvert Requests Thread.
    As far as the code is concerned:
    Iit's not clear whether this VI was meant to run continuously or not. There is no outer loop for the VI, so the original programmer might have used the Run Continuously button. This is a bad idea, since that button is intended to be used for debugging purposes, not for normal operation.
    The VI has a minor bug. The numeric indicator for the result value has only 1 significant digit. Thus, for the colors black, green, silver it shows an answer of 0.1 but the actual value of the indicator is 0.05. 
    The original programmer used decorations to hide the numeric increment/decrement controls on the picture ring. This is not necessary. Simply right-click on the control select Visible Items -> Increment/Decrement to hide them.
    The colors shown aren't exactly correct. Some are missing. See here: http://samengstrom.com/24614782/en/read/4_Band_Resistor_Color_Codes  and here: http://en.wikipedia.org/wiki/Electronic_color_code

  • Why my AE, PR, etc are in test mode how can i get it in install mode

    why my AE, PR, etc are in test mode how can i get it in install mode

    Serge, I have the same issue, after updating the Creative Cloud Desktop application last week, suddenly some apps are in TEST mode instead INSTALL...  (adobe Premiere, After Effects). 

  • BlackBerry Smartphone 8830, how to make ringers ring louder

    Hello All,
    I am a brand spanking new member on here, wondering if you lovely people could help me. When I put real music ringtones on my phone it rings very low. My friend has the Curve and her ringtones ring very loud when she put her phone on the normal profile and set the level to medium. I put mine on the Loud profile, and set the volume level to high and it still rings like a Low. When I play the ringtones back, they ring loudly but when someone calls me they ring low. Can someone tell me what to do?
    Thanks,
    T

    I don't have any issues with my ringtone volume, but I am using a Pearl 8120 on T-Mobile. You might want to go ahead and get a new phone inside a Verizon store. That way you can test out the volume of the ringers before you leave.
    tiville wrote:
    Upgrading to the latest software does not work. Verizon wanted to give me a new phone b/c they are saying the ringer should be louder than that. Do you have problems with your ringer volume?

  • How to make a field from display mode to change mode for a perticular tcode

    hi all,
    my client want to change one field which is in display mode of a material doc in mb02.
    Restrictions in some fields  in MIGO needs to be changed.
    Uploading point in case of issue: While editing the MIGO latter,  this field needs to be edited.
    Goods recipient in case of receipt: While editing the MIGO latter,    this field needs to be edited.

    hi thanks for quick replay,
    my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
    i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
    any comments?
    regards,
    susanta
    Edited by: susanta bindhani on Jun 19, 2008 2:18 PM

  • I have a VI with menu barattached i want to remove the menu bar.I am able to remove the menu bar in run continuously mode.but not in normal mode how do i do it in normal mode

    I have a VI with menu bar.I am able to remove menu bar in continuous mode by setting window appearence.But i want the menu bar to be removed at normal mode also.How do i do it

    You can trun off the menu while the VI is running by going into the VI properties (right click on the VI icon and select 'Properties). Then from the Catagory selestion box, select Window Appearance, click the Customize button, then uncheck the Show Menu Bar check box and hit OK twice. That shold do it.
    Note that this will only turn off the menu while the VI is running. The standard menu will always be showing when the VI is not running.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

    I think a few pictures speak a thousand words. I try to get creative and design some pages in landscape mode.
    This is how the TOC looks like in landscape. As you can see there is a chapter and many pages. I didn't use sections to make sure that they don't appeared as a list in TOC page.
    This is how Chapter page looks like.
    But when viewed in portrait mode. nothing appeared.
    How shall I make sure that at least the text in chapter page goes there?
    Thanks!

    If I add a text box, it does not seem that inline is an option.
    When I create the chapter page, the bottom part is empty, but I do not know how to add text. If I add a text box, it is not inline.
    I hope to be able to add inline text which appeared at the bottom, possible?

  • How to make a ring counter in Multisim

    How would I do this?
    Modify this shift-register in the
    following manner.  Disconnect the
    wires on the J and K inputs of the first (left most) flip-flop.  Wire the Q output from the right-most
    flip flop back to the J of the first flip-flop.  Now, wire the Q' of the right-most flip-flop back to the K
    of the first flip-flop.  You have
    just made a ring counter.
    a)  CLEAR the shift-register by moving the "C" switch
    down then up.   Move the DATA
    switch to logic 0.  Now, move the
    PRELOAD switch to logic 0.  Note
    the outputs.  Move the PRELOAD
    switch back to logic 1.  Toggle the
    clock "B" two complete times and note the output.  Account for this action.
    b)  Toggle the clock "B" two more complete times and
    note the output.  Account for this
    action.
    c)  Why do they call a ring counter a data re-circulator?
    Attachments:
    Lab7b.msm ‏49 KB
    Lab7b1.msm ‏49 KB

    I am not sure as to what you are having trouble with. Could you explain what is giving you trouble and then maybe we can procede from that point. Is it wring the circuit? Do you not understand what the questions want as an answer?
    Please let me know exactly where your having problems and I will be able to help you navigate through this.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • How to restore an ipad in lost mode, how to restore an ipad in lost mode?, how to restore an ipad in lost mode?

    I got my iPad taken away recently and used my phone to find my ipad. I have now gotten back my ipad and can not unlock it because my passcode is no longer working. I have tried to restore it but am unable to because it is locked and in lost mode. I have disabled the lost mode through my phone but my ipad is not connecting to my wifi. How can I fix this issue?

    TRY FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • I updated my iphone4s from the phone it self and know its stuck in recovery or dfu mode how do i get out of this mode iv tried everything with buttons on the phone nothing itune wont even accept it

    i updated my iphone 4s ios from the phone it self it load with on sreen a apple with load line when done it said connet to itunes but wont it doesnt read i dont want to restore and lose all my photos and videos i went to best buy and they tried toget my photos of when all the screen says connet to itunes i went to virizon they tried transwering my datat to another phoe nothing went apple all they can do is restore i dont want to so the aid sent it to drivesavers if i do that it could cost anywhere from 400-1200 is there aby to get my phone open without losing any of my stuff if i dont want to send the phone to drivesavers please help

    It's in recovery mode. There is nothing left on the phone. You have no choice but to restore it.  Have you not been backing it up on a regular basis?

  • I wanted to trouble shoot, put comupter in safe mode , now its stuck , closed FF 3 times, re-started computer, still in safe mode.how do i get out of safe mode

    i wanted to do trouble shooting, i put computer in safe mode & now i can not get out of safe mode. I've closed FF & re-started computer 3 times, even shut down computer, still in safe mode. What do i need to do to get out of safe mode?

    Hi,
    Please see this article: [[Firefox is stuck in Safe Mode]]
    I hope that helps. Post back if not.
    --Edward
    EDIT: Just noticed that you already rebooted. You say that you "put computer in safe mode". Is firefox in safe mode or your whole computer?
    If '''Firefox''' is stuck in safe mode despite reboot
    * Check that the shift keys on your keyboard are not stuck down.
    * Uninstall firefox and install again (your settings will not be lost as they are stored in your profile folder).
    Let me know if neither of those works.

Maybe you are looking for

  • Can i assign a string to a variable in User Exit?

    Friends, I would like ot write a User Exit that will assign a string to a variable depending on the value of the other variable. I just wanted to know if such a code is valid: When zimport IF i_step = 2.      " read user input parameter         l_s_r

  • Logical standby database

    Guys, Is it possible to create a logical standby database without installing Oracle Data Guard.And if yes how sync. is performed. Thanks

  • T-Code for craring Tax Jurisdiction Code

    Hi, I need to define tax codes in FTXP,before that i need to define Tax Jurisdiction Codes.Kindly advice me where can i create the new Jurisdiction Codes. Thanks Supriya

  • Hibernate and ora_rowscn

    We are trying to implement optimistic locking through the used of ORA_ROWSCN, and the developers are running into the problem that hibernate is incrementing the ora_rowscn number when updates are done on the row. Develpers don't see a way to make usi

  • I actually made a psd and i dont remember how i made it.Is there a way i can retrace my steps so as to make it again?

    I actually made a psd and i dont remember how i made it.Is there a way i can retrace my steps so as to make it again?(p.s: i used lot of stuff like gradients blending and i want the same effects on another pic but i hardly remember how i made it)