Facetime not showing missed calls with 7.0.4

I bought my iPad 2 March 2012. I can't remember when, but just a few month after I bought it, the facetime doesn't show missed calls. There is not 'red badge' on Facetime' icon. I kind of 'fixed' it by restart the iPad (please note, I restart the iPad, not the facetime). The problem went away, but after a couple of days, it came back.
I installed 7.0.4 recently and hope it would fix the problem, but no luck. The Facetime still not showing the missed calls. However, there are behavior changes:
1. even though the 'red badge' doesn't show up, if I open facetime, there is a missed call log.
2.if I open Facetime and then push the home button, the 'red badge' with correct number of missed calls then shows up.
I took the iPad to the Apple Store for 2 times and they erased everything and re-install the iOs and even firmware from scratch. I didn't back it up from either icloud or my computer to avoid restoring the bugs back. It works fine at the beginning, but the next day, the problem came back again.
The technician at the Apple Store gave up and said I may have to wait for another iOs update....
Does anyone have the same problem?
Can anyone help me?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Similar Messages

Not showing missed calls and dropping calls

I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported this and I received a refurbished phone and still have the same problem any know issues with this?

Hi bbarront,
I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device. Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail? I look forward to hearing from you soon.
Thank you for your involvement in our community forums,

Why is my iPhone 4S not showing my caller Id info while I'm a call

Why is my iPhone 4S not showing my caller Id info while I'm a call?

As in the manual page 49:
Call forwarding, call waiting, and caller ID
The following information applies only to GSM networks. For CDMA networks, contact your carrier for information about enabling and using these features. See support.apple.com/kb/HT4515.
Turn call forwarding on or off: Go to Settings > Phone > Call Forwarding. The Call Forwarding icon ( ) appears in the status bar when call forwarding is on. You must be in range of the cellular network when you set iPhone to forward calls, or calls won’t be forwarded. FaceTime calls are
not forwarded.
Turn call waiting on or off: Go to Settings > Phone > Call Waiting. If you’re on a call and call waiting is turned off, incoming calls go directly to voicemail.
Turn caller ID on or off: Go to Settings > Phone > Show My Caller ID.

Which phone or software can show miss call list in...

Which phone or software can show miss call lists in separate lines/items/details (not group together from the same person).
I want these:
1. wife missed call me 9.00AM
2. wife missed call me 9.15AM
3. I see phone and see 2 missed call items in separate 2 lines and then I press clear.
4. wife missed call me 10.00AM
5. I see phone and see 1 missed call item.
Thank for advance

Have you copied the inf file from another system and copy it to windows system directory?
You need to have that copied or you need manually each and every system using the server name and System ID
thanks.
Wond

Redialing External Miss Calls with 9

Hello,
We have a UC 320W and 4 Cisco IP Phones 303. Is there a way to configure the phone or the router to automaticaly redial an external miss call with the 9 on the front? When I redial the external call without editing the number with 9, it goes to Auto Attendant.
Also, how can I configure the router, so that I can call from an external line to only one specific extension? I know there is a configuration on Inbound Calls, but do I need another telephone number for it?
I will be gratefull if anyone can help.
Regards,
Ben.

Hello Mauricio,
I think you can achieve this requirement , you have to perform below steps
1) Create CSS -EXTNL and PT- EXTNL
2)lets say from outside sombody is dailing 12345678 ie is your user DID number
3) then create a TP 12344567 and give PT-EXTN and translate this TP to your secretaries number
4) assign CSS-EXTNL to the gateway where the call is coming from, so that only gateway should have this access to this TP.
So whenever calls comes in from this gateway 12345678 it will hit the Gateway first then your TP and it will translate to your secretaries number and seceartary can answer phone by passing the user external everytime.
P.S once you have this , this particular user will not recieve any external calls, all calls shall be re-directed to secartary . In case user wants to attend external then you have remove this TP and CSS .
Br,
Nadeem
Please rate all useful post.

My iphone 4s sometimes wont show voice mail,sometimes wont ring just shows missed call,sometimes wont receive a text till next day. can anybody help me???

My phone sometimes wont show voice mail,sometimes wont ring just shows missed calls,and some text messages wont show received till next day. Can anyone help?

Settings > General > Reset > Reset Network Settings.
Try reseating or replacing the SIM card.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Has any of the above been tried?

HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to swicth over or show me who is calling. The call doesn't appear in my "recents" either.

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to switch over or show me who is calling. The call doesn't appear in my "recents" either.

We appreciate your feedback on this matter, gingerspice913. I've not come across this issue before. Do you know how long it has been since the issue began? Please try to reset the network settings to see if it helps http://vz.to/1swAJbD?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Good day, I can not make video calling with my MAC PRO 15 with FB Mountan Lion operating system how can I do?    you can you help me? thank you very much

good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
   you can you help me? thank you very much

francesco marraffa wrote:
good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
   you can you help me? thank you very much
Are you running your MacBook Pro off WiFi or Ethernet?
Pete

IPhone 5s won't ring or show missed calls

I have a a new iPhone 5s, and new service with Virgin. Its been working fine for the past month. Suddenly, today it stopped ringing on incoming calls. Neither, does the phone vibrate. Additionally, incoming calls do not show in the "Missed Call" log. If the caller leaves a voice-mail, that will show, and I will get my audible notification. The phone is not in "mute" and the "Do Not Disturb" is not turned on. The volume is turned all the way up. All other sound-features are working. The software is up-to-date. I've tried calling my phone from a land-line at my office, as well as a cell-phone from another provider. My bill was paid in full 4 days ago. I have tried turning the phone off completely, twice, and the issues persists. Some advice I've read here said to reset the phone. But several users stated that this did not fix the problem. Prior to this phone, I used an iPhone 4, for four years, and never had this problem. Help! I missed my phone-call interview for the Dream Job I have been shooting for for ten years. I HAVE to resolve this before my rescheduled interview on Monday. Please help!!

You need to reset your iphone settings by go to setting opetion.
sometimes funcation face crashing problem
first you turn off your off , and after 5 minutes turn on and goto settings. reset it

Not showing recent calls, and privacy settings

Im so confused. All of a sudden, my iphone 4 is glitching. Here are the problems
1)its not showing my recent or missed calls at all, unless a voice mail is left
2) in the privacy settings, its not allowing me to allow apps access to my photos
3)my photo apps (including instagram) wont open
I tried doing a hard reset on the phone, and that didnt work. I also tried removing the apps and restoring them in itunes and that didnt work either.
HELP!!

Hello emilydoanne,
Oh No! I'm extremely sorry to learn that you're having issues with your wireless device. I understand the importance of having consistent access to your device at all times. I want to make sure we work on a resolution right away. I do appreciate you completing a hard reset on the device. When this process was completed, how did you do this? Have you plugged your device into iTunes to process a full factory restore? Have you taken your device into a local Apple or VZW store for a hands on evaluation? Please keep us posted, thanks!
MatthewS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

11g Cube not showing any data with no Rejected records

Hi David ,
Strangely one of my 11g Cube is not showing data from today as it is showing all records rejected . However when I lookup Rejected records table I didn't find any records .Not sure what is happening . When I want to peep out the AWM queries from CUBE_BUILD_LOG and ran to the database in the AWM schema the records are retruning perfectly fine . I wonder same query is firing during Cube load but without any data ? My Cube build script has only LOAD and Aggregate .
after maintain My dimensions data are looking fine but no data populated after Cube maintenance . My MV switch off across all dimensions and cubes .
I navigate to CUBE_OPERATION_LOG and not able to comprehend about the content.
Any advice ?
Thanks and Regards,
DxP

Hi David ,
To be very frank today is very bad day ... Please see below my observation:
Executed below to make sure that no key values in dimension is missing but present in fact . All below query returns no row.
select distinct owner_postn_wid from w_synm_rx_t_f
minus
select distinct row_wid from postn_dh
select distinct payer_type_Wid from w_synm_rx_t_f
minus
select distinct row_wid from wc_ins_plan_dh
select distinct market_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_product_dh
select distinct period_day_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_daytime_D
select distinct contact_wid from w_synm_rx_t_f
intersect
select distinct row_wid from w_person_d
select distinct X_TERR_TYPE_WID from w_synm_rx_t_f
minus
select distinct row_wid from W_LOV_D
============================
Below returns count of 0 rows : ensure no NULL present
select count(1) from w_synm_rx_t_f where contact_wid is null;
select count(1) from w_synm_rx_t_f where owner_postn_wid is null;
select count(1) from w_synm_rx_t_f where payer_type_Wid is null;
select count(1) from w_synm_rx_t_f where period_day_wid is null;
select count(1) from w_synm_rx_t_f where X_TERR_TYPE_WID is null;
select count(1) from w_synm_rx_t_f where market_wid is null;
+++++++++++++++++++++++++++++++++
Cube Build Log has below entry:
796     0     STARTED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     1
796     0     COMPLETED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     2
796     0     STARTED     LOAD     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.283000000 PM +05:30          JAVA     1          C     47142     68     0     1
796     0     SQL     LOAD     MKT_SLS_CUBE     CUBE     "<SQL>
<![CDATA[
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST ]]>/>
</SQL>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.627000000 PM +05:30          JAVA     1     MAP1     C     47142     68     0     2
796     0     COMPLETED     LOAD     MKT_SLS_CUBE     CUBE     "<CubeLoad
LOADED="0"
REJECTED="4148617"/>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.486000000 PM +05:30          JAVA     1          C     47142     68     0     3
796     0     STARTED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.501000000 PM +05:30          JAVA     1          C     47143     69     0     1
796     0     COMPLETED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.548000000 PM +05:30          JAVA     1          C     47143     69     0     2
+++++++++++++++++
You can observer clear rejection of 4 million rows ... Ran the above query which returns my data successfully.
Look out to CUBE_REJECTED records take the sample record and put into the above query it is returning the data fine with my measures and dimension WID's :(PLEASE SEE BELOW THE FILTERS on ROW_WID)
=========================
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND T13_ROW_WID = 255811
AND T7_ROW_WID = 122
AND T4_ROW_WID =3
AND T1_ROW_WID=230
AND T10_ROW_WID = 26
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST
=================================
THE XML export of CUBE as below:
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2.0.1">
<Cube
ETViewName="MKT_SLS_CUBE_VIEW"
Name="MKT_SLS_CUBE">
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="TRX"
Name="TRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="TRX">
</Description>
</BaseMeasure>
</Measure>
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="NRX"
Name="NRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="NRX">
</Description>
</BaseMeasure>
</Measure>
<CubeMap
Name="MAP1"
IsSolved="False"
Query="W_SYNM_RX_T_F"
WhereClause="W_DAYTIME_D.ROW_WID = 20100101">
<MeasureMap
Name="TRX"
Measure="TRX"
Expression="W_SYNM_RX_T_F.MKT_TRX">
</MeasureMap>
<MeasureMap
Name="NRX"
Measure="NRX"
Expression="W_SYNM_RX_T_F.MKT_NRX">
</MeasureMap>
<CubeDimensionalityMap
Name="TIME"
Dimensionality="TIME"
MappedDimension="TIME.CALENDER.MONTHLY"
JoinCondition="W_SYNM_RX_T_F.PERIOD_DAY_WID = W_DAYTIME_D.ROW_WID"
Expression="W_DAYTIME_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="CUSTOMER"
Dimensionality="CUSTOMER"
MappedDimension="CUSTOMER.CUSTOMER_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_SYNM_RX_T_F.CONTACT_WID = W_PERSON_D.ROW_WID"
Expression="W_PERSON_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="INS_PLAN_DH"
Dimensionality="INS_PLAN_DH"
MappedDimension="INS_PLAN_DH.INS_PLAN.DETAIL"
JoinCondition="W_SYNM_RX_T_F.PAYER_TYPE_WID = WC_INS_PLAN_DH.ROW_WID"
Expression="WC_INS_PLAN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="LIST_OF_VALUES"
Dimensionality="LIST_OF_VALUES"
MappedDimension="LIST_OF_VALUES.LOV_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_LOV_D.ROW_WID = W_SYNM_RX_T_F.X_TERR_TYPE_WID"
Expression="W_LOV_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="POSITIONDH"
Dimensionality="POSITIONDH"
MappedDimension="POSITIONDH.POST_HIER.DETAIL"
JoinCondition="W_SYNM_RX_T_F.OWNER_POSTN_WID = POSTN_DH.ROW_WID"
Expression="POSTN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="PRODH"
Dimensionality="PRODH"
MappedDimension="PRODH.PRODHIER.DETAILLVL"
JoinCondition="W_SYNM_RX_T_F.MARKET_WID = W_PRODUCT_DH.ROW_WID"
Expression="W_PRODUCT_DH.ROW_WID">
</CubeDimensionalityMap>
</CubeMap>
<Organization>
<AWCubeOrganization
MVOption="NONE"
SparseType="COMPRESSED"
MeasureStorage="SHARED"
NullStorage="MV_READY"
CubeStorageType="NUMBER"
PrecomputePercent="35"
PrecomputePercentTop="0"
PartitionLevel="TIME.CALENDER.MONTHLY"
AW="&AW_NAME;">
<SparseDimension
Name="TIME"/>
<SparseDimension
Name="CUSTOMER"/>
<SparseDimension
Name="INS_PLAN_DH"/>
<SparseDimension
Name="LIST_OF_VALUES"/>
<SparseDimension
Name="POSITIONDH"/>
<SparseDimension
Name="PRODH"/>
<DefaultBuild>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
)]]>
</DefaultBuild>
</AWCubeOrganization>
</Organization>
<Dimensionality
Name="TIME"
ETKeyColumnName="TIME"
Dimension="TIME">
</Dimensionality>
<Dimensionality
Name="CUSTOMER"
ETKeyColumnName="CUSTOMER"
Dimension="CUSTOMER">
</Dimensionality>
<Dimensionality
Name="INS_PLAN_DH"
ETKeyColumnName="INS_PLAN_DH"
Dimension="INS_PLAN_DH">
</Dimensionality>
<Dimensionality
Name="LIST_OF_VALUES"
ETKeyColumnName="LIST_OF_VALUES"
Dimension="LIST_OF_VALUES">
</Dimensionality>
<Dimensionality
Name="POSITIONDH"
ETKeyColumnName="POSITIONDH"
Dimension="POSITIONDH">
</Dimensionality>
<Dimensionality
Name="PRODH"
ETKeyColumnName="PRODH"
Dimension="PRODH">
</Dimensionality>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<ConsistentSolve>
<![CDATA[SOLVE
SUM
    MAINTAIN COUNT
     OVER ALL
)]]>
</ConsistentSolve>
</Cube>
</Metadata>
+++++++++++++++++++++++
I dropped the AW and create new from exported XML and maintain all dimensions and then rebuild . Still have the issue :(
Any thing you can hightlight from above ?
Thanks,
DxP
Also I sustpect whethere it is a issue due to below error caused when I click on one of my Position_Hier view from AWM : even if I select that view it is throwing the error in SQL developer after displaying first couple of rows (while page down)
java.sql.SQLException: ORA-33674: Data block size 63 exceeds the maximum size of 60 bytes.
at oracle.olap.awm.util.jdbc.SQLWrapper.execute(Unknown Source)
at oracle.olap.awm.querydialog.PagedQueryDialog$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
Edited by: e_**** on Aug 17, 2011 8:41 PM

I think there is a flaw in ios 5. Notification centre doesn't show missed call, during another call is in progress, after accessing recent calls in phone app, once.

Notification centre in ios 5 is not showing the missed calls when another call is in progress. It shows perfectly before accessing the phone app. But once you access the recent calls in phone app, then afterwards it stops showing the missed calls during another call is in progress.

Forgot to add, this happens, when you receive a call, during the phone is locked, and you receive a call, while the previous call is in progress.

Facetime not showing missed calls with 7.0.4

Similar Messages

Maybe you are looking for