Facetime opens when I end a phone call

Hi.
I'm running iOS 7.1.2 on my iPhone 4.
Recently I noticed this strange behaviour. It does not happen with all phone calls, but it already happened twice since yesterday, I receive a phone call and once I hang up I'm sent to the iPhone's main screen with the green warning bar informing me to click there to return to my Facetime call. If I click I'm sent to the Facetime app.
But notice that I did not make a Facetime call, I received a standard phone call.
Has anyone else seen this behaviour?
Can someone help me?
Thanks.
Pedro

When you're on a call with someone who is registered on FaceTime, there is a button to switch to to a FaceTime call. It's possible that you are accidentally activating FaceTime as you pull away and the proximity sensor reenables the display. I'm guessing that if you look at a pattern of when this happens, it's only with FaceTime users. Just a guess though.

Similar Messages

  • I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

    I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

    Morning Lupoipia,
    Thanks for using Apple Support Communities.
    If you can't be heard by someone who is calling, take a look at this article:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • When I start a phone call, noboby can hear my voice . Only when I click on speaker  voice can be heard at both ends.

    When I start a phone call,nobody can hear my voice and viceversa. Only when I click on speaker , voice can be heard at both ends.

    Return the darn thing!
    Why do you & we accept a phone that does not work 100%
    We should be discounted the non working percentage, or simply get a new working one.
    Would you accept a saucage with a rotten end, and hope they would treat it with enough chenichals to make it taste and look good?
    The problem seems to me a hardware problem, and may be poor assembly. Noticed that incoming calls on my first 4s when vibrator was on, made an extra vibrating noise - i.e. loose speaker, printboard or what do I know.
    This does not occur on the phone I purchased yesterday, waiting for the other at the repairshop.
    Does Telenor and Apple think I will accept the repaired brand new phone?
    NOT!
    TCB

  • How do I change the settings so that when I make a phone call I can make my screen go black and not mute the call with my cheek or it tries to face time my call. I need to change the sensitivity or something! Please help!!

    How do I change my phone settings on my iPhone 5 so that when I make a phone call while I am on the phone call my phone stays lit up. It never goes black so I am constantly hitting other buttons while I try to talk like mute or FaceTime or speaker! Please help this is so annoying! It's like all I need to do is fix the settings somehow and I have gone through all of my settings and I can't find where to do this!

    Is the phone in a case?  Try taking it out of the case.  If that doesn't work, then your proximity sensor is broken.  You'll need to bring your phone to Apple for evaluation.

  • When I get a phone call and them want to save the contact, no keyboard comes up to type the name.  How do I fix that?

    When I get a phone call , then want to save the message, no keyboard comes up to type the name.  How do I fix that? 

    You can open the Phone app then tap Recents then the blue 'i" in a blue circle at the right of the number then "Create New Contact" then tap a field such as "First" name and the keyboard should appear.

  • When I receive a phone call it also rings my husbands phone?

    When I get a phone call on my IPhone 5c it also rings on my husbands iPhone 4s and vice versa?

    That is a new feature of Continuity described in Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    You can stop it by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off on both phones.
    You amy also want to consider using separate Apple iDs.

  • I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

    I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

    Hi,
    There are two easy fixes to this.
    One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
    Two, go to Settings and turn-off "Handoff". This can be found under the General page.
    Hope this helps!

  • IPhone 4 updated from 6.0 to 7.1.2 and now the picture no longer appears when receiving or making phone calls.  How do I fix this?

    I updated the software for my iPhone 4 from 6.0 to 7.1.2 and now pictures (contact picture/picture ID's) no longer appear (take up the entire screen) when receiving or making phone calls.  They only show in a small circle which is not convenient at all.  How do I fix this, please?

    You are welcome. I have seen numerous posts on this subject, so I suspect you are correct. It doesn't seem like a welcome change. You can send feedback to Apple at http://www.apple.com/feedback/iphone.html

  • When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • When I receive a phone call from a new number, how do I save that number to my contacts?

    When I receieve a phone call from a new number, is it possible to save that number from the incoming calls screen? Can I create a contact from the number itself without having to go to the contact list and write the number in manually?

    Thank you so much. I feel like an idiot for not figuring that out on my own, it is so simple.  But I really, really appreciate this. Thank you!!!

  • Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

    today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

    Same issue already several weeks.
    And we are not alone:
    http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
    At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
    ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
    I already contacted BB Help at Twitter. Answer:
    Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
    I did replay:
    You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
    This my replay was 22 of march. No more answer from BB.
    I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
    What I already done:
    For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    This
    For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
    Doesn't help
    And this:
    For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
    No result.
    After install all of them phone wants to update to 10.2.1.2102 by air.
    BBVE in all versions sais: Can not obtain data from sensors.
    Dear BB support, please, can you explain, how to resolve this issue?

  • Audio autoplays when I finish a phone call. How do I disable that?

    Audio autoplays when I finish a phone call. How do I disable that?

    Hello BobWeaver,
    It sounds like we need to troubleshoot the software on your device as that is not expected behavior.
    I would perform steps 1, 3 and 5 from the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/. If you get to step 3, then I suggest closing all the apps. Here is step 1 to get you started:
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Cheers,
    Sterling

  • Ios 5 when i answer a phone call,  application audio  overrides phone call

    often an app i used earlier to play audio starts up again when i answer a phone call... It is not actively in use at the time the call comes in, just has to be one of the apps used recently. I have had to manually forcequit app to get it to stop plaing and overwhelming the phone call.
    This happens on 3gs as well as 4s. Same ios level.

    That sounds like a problem with the app it self. What app is it? However, it is possible a reset will fix that. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This will not affect data in any way.

  • When i get a phone call i want to activate the led flash - how?

    i would like to activate the led flash when i get a phone call without having the normal ringing tone. But how can i do that?

    Settings>General>Accessibility?

  • Blackberry Shuts Down when I make a phone call or access to the internet

    Please help someone, 
    I know there are similar question before. I took a look at them. but there was no solution. 
    just crossing my finger. 
    my blackberry is...
    Curve 9360
    3G wifi
    7.1 Bundle 2102 ( v 7.1.0.746  Platform 9.6.0.112)
    Hope it is enough info on my cellphone. 
    Everytime I make a phone call or use the internet, it shuts down immediately. when I received the phone call as well. 
    and I need to charge it first and then I can turn on again.
    It is not buttery consumption since the buttery sign shows almost full when I turn on again. 
    I would like to fix and use this phone at least another year. It has been 2 and half years. should work properly more!
    Thank you in advance!

    Hi everyone who gave me solutions,
    I appreciate all of your help and Im so sorry for late update. 
    I tried them, but did not work unfortunately. so I bought a new battery for $9 and now it's working very well like a new phone. 
    I will try to charge battery when it's almost gone.(not all the time) and try not to use phone while it's charging.
    I believe that it lengthens cell/battery life. 
    Thank you again for your help. 

Maybe you are looking for

  • How do you set the time period on IMAP email accounts (razr maxx)

    Hi Guys - Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts? Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see

  • HDMI Output Failure on 2-Mini's After 10.9.3 Update

    I have two separate (Late 2012, OS X 10.8) Mini's that are both (2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3) that have been hooked-up to identical Flanders Scientific professional HD monitors via HDMI cables from the computer output to HDMI / DVI ada

  • VB Appointments.Subject Read-Only? + Error

    I'm attempting to write a little VB code to send an appointment. Here is what I have so far.... Code: Private Sub CreateButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CreateButton.Click Dim gwApplication As Groupware

  • N660 TF 2GD5-OC VBIOS request

    Hello, So I finally bought this graphics card hoping I could use Windows Secure and Fast Boot, but I get an error message that the graphics card is not compatible. Could you plese provide me with a bios that suports UEFI GOP? My serial number is: 602

  • External Debugger From NWDS not working

    Hi, I am working on wd java. When i run my application, on particular event action, i am calling rfc. So to debug i kept my external debugger in my se37 (SAP GUI) and ran the application. But debugger is not called but i am getting the output from RF