Facetime Option Gone, tried all the tricks...

I've searched the discussion boards everywhere and tried all the tips, but I can't get the facetime option button back for any of my contacts.  I've used FT for over a year, but just vanished one day.
I've tried: soft reset, hard reset, phone restore, update software, cycle FT option in settings on/off, cycled wifi on/off in combo with FT option.  Nothing seems to work. 
I'm also just on a wifi network in Afghanistan, no cell coverage, but like I said I've used the iphone here and my buddy is using his right now.  The FT option in the phone settings says "Waiting for activation..." but I don't know why/how to fix it if that is the problem.  Desperate to talk to family so any help would be greatly appreciated.
Dave

Hi Dave,
I just had this very same problem but after research have found out why;
Go to setting> phone> faceTime/ turn it ON.
If this doesn't work, if restriction is enabled on your device then go to setting> general> restrictions> enter restriction code> faceTime/ set it on. I hope this helps!
Sarah

Similar Messages

  • Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

    Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

    Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

  • HT201263 my iphone 4 will not turn on after ios7 update tried all the tricks no phone now help please

    my iphone4 will not trn on after downloading ios7 i have tried to restart done all apple web site says looked on internet tried all the tricks they say and still no phone 

    If everything has been tried, the next step would be taking the device to Apple for evaluation and possible replacement.

  • My ipad 3 stopped charging, not the adapter and reboot doesn't do anything.  I've tried all the tricks and different adapters and now my nearest Apple store is saying it just doesn't work and it'll be $300 to replace.  Only had it 1 yr and half.

    My ipad 3 suddenly stopped charging last week.  I've tried different adapters, to no avail.  I didn't drop it or spill anything on it.  I don't have tons of apps, so plenty of memory.  My husband took it to the Apple store for me and they tried charging it too even though I knew that wasn't the problem and then said it wasn't working (no kidding) and then told him it would be $300 to replace.  Seeing as I've only had it for a year and a half and it cost more than twice that to begin with, I'm a little ticked that it stops charging, a problem I know is very common according the all the message boards and they want to charge me $300.  I've always heard that Apple was so good to it's customers, but my iphone has been a nightmare, and now my ipad won't charge.  Also, I've tried the reset options I've read about and none worked.  Sorry, just really upset.  I thought I was paying all this money for better quality and now I feel foolish for having done so.  Anybody with any ideas I, or the genius at Apple haven't thought of?  Help is appreciated.  Thanks.

    May be some help on one of these links.
    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • G5 Won't start up.. I've tried all the tricks I know.

    OK.. so the other day I restart my G5 Tower because it was a little sluggish.. haven't restarted in a while so I re-booted ... the grey apple screen comes up.. then the Starting mac osx progress bar loads all the way to the end.. then just hangs... if I left it there for hours it would still be there.. I have tried everything I know and could find on these boards as well as osx help articles.. here is what I have done.
    first:
    started up from install cd.. tried to repair volume couldn't complete the repair. apparently there are like 40 overlapping files somehow.
    second:
    ran diskwarrior 3.0.3 got all the way through the process to where it says it is repairing overlapping files then suddenly there is an error and it can't continue.. Did this three times
    third:
    tried to boot in safe mode.. spinning gear then goes to starting mac osx progress bar and same story .. hangs for eternity.. bar is still moving but I can't get past this screen.
    fourth:
    booted in single user mode ran fsck 4 times until it said nothing appears to be wrong....
    re-booted and same thing happens Starting mac osx screen comes up progress bar loads til the end and never goes any further.
    fifth:
    Booted from OSX install cd tried to archive and install OS... wouldn't even begin to do this just said there is an error and to try again... Tried this twice.
    sixth:
    tried booting in target disk mode hoping I could just copy a few essential files I hadn't recently backed up with the intention of doing an erase and install of the whole computer.. couldn't get my laptop to see the G5 HD on the desktop.. opened disk utility on the laptop and it shows up but won't enable any repair options.
    So at this point I am at a serious loss. It appears I have a serious problem with something like 40 overlapping files that are causing all this misery but I can't get to the files to delete them.. and nothing I run can repair them
    at this point I just want to get in to the HD anyway I can to backup so I can do an erase and install with Leopard. Anyone have any input out there that might be able to help?
    PS: I have just enough knowledge of using the terminal to make me a danger to myself.. so if any input you have comes in the form of 500 command lines then please either spell it out in detail so I know exactly what to type and when.. or just please act as though you don't see me flailing my arms on this rapidly sinking ship.

    Sounds like possib;y putting the HD in an external Firewire case, (possibly Target mode if that still works), then If DiskWarrior can't fix it, you might try Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.

  • Cannot synchronise with E61i - tried all the tricks posted on web

    I just got my second Nokia E61i but when I try to synchronise it with my contacts and iCal via Bluetooth I get an error message 'Device is not available or synchronization was cancelled. Close dialogs and applications on the phone and try again". The date and time are set correctly on the phone, I've tried removing the device from iSync and re-adding it, switching the phone off and back on again and then finally re-setting the device on iSync only to receive the same error message. My previous e61i worked perfectly but for some reason I cannot get the new handset to sync. Any ideas? Any help with this would be much appreciated. Thanks!

    After getting the second E61i, did you completely remove the first one from both iSync and the Bluetooth system preferences pane, then setup the new phone from scratch?
    If not, the Bluetooth system software probably thinks it is still trying to talk to the old phone.

  • Camera shutter won't open, have tried all the tricks, closing all apps, turning phone off, hard stop, etc. nothing is working. Any ideas ?

    My camera app on my iPhone 4 is not working. The app will open but the shutter will not open and I am unable to open the options, etc. I have tried closing all apps, closed and reopened my camera app, shut the phone off, did a hard stop and the camera still will not work. Any help ?

    Hard reset. Hold the top lock button & Home Screen button til you see the White apple. Try camera afterwards.

  • TS1398 My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr!

    My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr! This has been an issue since installing new IOS! How long will it take apple to come up with a fix. My carrier offered me an early upgarde at a massively inflated monthly cost (how kind of them!).

    My Wifi has completely gone, the option on the slider is greyed out, and the slider won't slide. Tried all the fixes on the forums, (except the fridge/frezzer method), none work. Grrrrr! This has been an issue since installing new IOS! How long will it take apple to come up with a fix. My carrier offered me an early upgarde at a massively inflated monthly cost (how kind of them!).

  • I can't find "Define" option in iOS 6.1.4 in iPhone 5. Tried all discussed tricks, all in vein. Please help!!!

    I cannot find that "Define" option in my brand new iPhone 5, after updating to iOS 6.1.4. I have tried all discussed tricks of changing language, rebooting, then "define" option appearing and downloading dictionary. And then reverting back to English. Nothing whatsoever worked for me. It's quite annoying for me. Please help how to get that "define" option back, and download the default dictionary!!!

    Only this time, that "define" appeared n French. I downloaded the dictionary successfully, & then reverted back to English. Only to get disappointed that in English, that option is still missing. I simply don't know how to import that option from French to English.

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • Windows needs to install driver software for your Apple Mobile Device (recovery mode) what do i need to do for this error? i tried all the options and my ipod wont work , need help???

    i am using ipod touch 4g

    rishiv93 wrote:
    i tried all the options...
    Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

  • My iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off

    my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......

    hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile

  • I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

    I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

    Hi chiekoo,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694#error21
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    Best of luck,
    Mario

  • TS3367 I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying  waiting for activation

    I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying  waiting for activation

    What tips have you tried so far?   Just so we don't waste our time telling you things you've already done.
    When you respond, also indicate which country and carrier you're using.   Also, is your phone brand new?  can you make a phone call / access the internet while on cellular?

  • Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5

    Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5
    Thank you for your help

    Hey,
    Considering error "licensing has stopped working", you might need to try out the solutions mentioned in the following KB doc link:
    Error "Licensing has stopped working" | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

Maybe you are looking for

  • Improve built in SQL MAX function

    Hi I am trying to improve the performance of the built in SQL max function. right now searching through over 500,000 rows takes lot of time which can be reduced. Can anyone suggest me something which would be helpful in this or may be give me a link

  • Ssh -X solaris 9 host fails to set DISPLAY

    i'm running Suse 9.1 Pro as my graphis client. x86 doesn't quite work yet on my host. i'm trying to run smc from my E250 (headless) to my Suse 9.1 desktop. the E250 is running Solaris 9. when i ssh -X and echo $DISPLAY, DISPLAY is empty. howerver, i

  • Streaming multi bit rate and single bit rate

    I'm trying to simplify my setup.  Sometimes I need to stream multi bit rate and sometimes I need to stream single bit rate.  This is due to the internet connections I'm sending from sometimes have poor upstream and multi-bit rate is too much bandwidt

  • My ipad suddenly blocks all wi-fi access with this notice: "Web Page Blocked"

    I've ensured my time is on auto, have reset setting, etc. but nothing works to-date.  Here's the full error notice I receive:  "Web Page Blocked.  An error ocurred while trying to rate the website using the web filtering service.  Web filter service

  • Changing MTU for local-zone

    I'm getting ready to go to gigabit jumbo frame (MTU 9000) network, but I'm not there yet. I have some nice Intel NICs, and I set them so they can do a MTU 16128 but fix the MTU at 1500 until I make the change. But the local-zones interface won't chan