Facetime removes country code

So this is whats happening. I've got an Iphone 4S with the latest update iOS 8.1.1 and it is always been mine. Lately I've been experiencing a lot of troubles with it (I cannot install new apps - only using my mac to install it through itunes) but what bothers me the most is that facetime is not working properly.
It was not taking my phone number as a Caller ID / Reach at so what i did was turn it off and on again but this time the phone number it took was my phone number without the country code. So now I have a Facetime number without two of it digits. And what surprises me the most is that is registered. When I call to another iphone it appear this "new" number that does not exist.

Is this Gen4 AE from your other post??
How brave are you?? Or how much do you like hackery?
I have instructions to change the country code.. you will need to solder in a serial console.. are you that mad yet??
Apple allow me to give you these details.. and delete my posts if I say other minor things..
Serial Access to airports.
http://embeddedideation.com/2014/03/dissecting-the-airport-express/
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
Once you have serial console access the change is trivial.
Do you want to be on the bleeding edge??
Surprise your friends with your hack skills.. !!

Similar Messages

Avoid Country code in CRM

HI All,
I am facing issue with Automatic addition of country code to the Phone number which we recieve from Interface. Our client wants Users themselves will add country code and we should disable automatic addition of country code based on Country. I went to Setting under IMG--Sap webapplication server-Set Country codes there I tried to remove country code but then it was disabled for all interface. My problem is for particular interface they want to disable it but for other interface then want CRm to add country code. Can anyone help me with this.
Many thanks,
Ashutosh

Hi Praveen,
There was nothing much we did in CRM. We had XI so we decided to handle it at XI level. Even if CRM adds country code to the number while sending it back XI will chopp off country code and send it to interface.
Regards,
Ashutosh

Removing the country code prefix from all contacts in the Address Book

upgrading my iphone (to os 3.0) added country codes to all of my contacts,
not noticing this i synced it with my mac, thus adding said preixes to the contacts on my mac as well.
is there a way (only applescript from what i understand) to remove the country code from all my contacts?
thanks!

paste the following into Script Editor
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Address Book"
set mlist to selection
repeat with per in mlist
set NP to number of phones of per
repeat with i from 1 to NP
set curphone to value of (phone i of per) as text
if text 1 thru 4 of curphone is "+972" then
set value of phone i of per to "0" & text 5 thru -1 of curphone
end if
end repeat
end repeat
save
end tell</pre>
select all the contacts you want to be affected in Address Book (you can select them all) and press "run" in script editor.

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

Iphone 5 - other users recieve texts massages from me with another country code

Hello, I recently travelled to Israel and used a differnet SIM card in my Iphone, but ever since I got back to the states... othe people got my txt from my hotmail account. I read through the discussions here and figured out how to change that, the other problem is that my phone numer under the text massage setting appear with Israel country code (+972) before my american number!?
so when I go to setings>massages>send and recieve>...
my options are either my hotmail account or +972and my us number ...
so when other people recieve txts from me it seems like somebody txted them from a different country ...
anybody has an idea how to change that ?
Thank you!

Hello there, GititK.
The following Knowledge Base article offers up some great information in regards to linking phone number to iMessage:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Lightroom 4 GPS/ Country Code questions

1. If you import an image with GPS data, Lightroom 4 will add appropriate values for Sublocation, City, State/Province, Country and Country Code. Is there a way to add this data to existing files while retaining history?
You can write metadata to files ([Ctrl][S]), remove those files from Lightroom and then synch folder to reimport them. That reimports them with all modifed settings but without their history. Is there another way that retains the history?
2. Is a google map link available for a GPS location of a photograph?
In Lightroom 3, you could click on the GPS location and that took you to a Google map page with a specific web link that you could then publish, eg on a blog. You can copy and paste the GPS location into a Google map page but that does not give you a web link you can use.
3. Is there a way of publishing a map?
Is there (or will there be) any way of exporting a map page, say as a jpeg?
Is it OK to take a screen dump of a map page and publish it, eg in a blog?

Ian Lyons wrote:
1. There is no way of saving history to the file.
I've worked it out. There is a way of updating location descriptions for existing images in Lightroom 4 from the GPS setting.
If you select some images with the same GPS location and [Synch Metadata] for GPS, this fills in the location descriptions, even if none of the images have them to start with.
There are then two ways of doing this for a Folder of images:
(1) Modifying in Library
Select a bunch of images taken in the same place and therefore with the same GPS setting. You can check that the GPS settings are the same because under Metadata in the right-hand tab it will show a single GPS location rather than "<mixed>".
[Synch Metadata] for GPS.
Repeat for different locations.
If you have a single image in a location, you'd need to create a virtual copy, [Synch Metadata] for GPS, then delete the virtual copy.
(2) Modifying through re-import
This method is more complex but may be quicker where there are many GPS locations.
It is probably a good idea to first ensure you have a current backup, or backup to a catalogue, in case anything goes wrong.
Select images with no changes to Develop settings: click the Metadata filter (Library/ Grid mode) and then filter for Develop Preset = "Default Settings".
Write metadata for these images to files
[Ctrl][S]
(unless you already do this with every image change)
Remove the selected images from the Lightroom catalogue: click [Delete] and then select [Remove] (do not [Delete from Disk]).
Reimport the images: right-click the folder for the images and select [Synchronise Folder ...].
All the images with no Development changes will now have location descriptions.
Now you can update the images with Development changes without affecting the History.
Filter for Develop Settings = "Custom",
select an image (or several at the same location),
filter for Develop Settings = "All" and
synch GPS settings from an adjacent image with location descriptions.

HT5252 My facetime removed from my iphone.when i go to contact there is no any facetime shortcut.what can i do now?

My facetime removed from my iphone,when i go to the contact there is no any facetime shortcut.what can i do now?

The iPhone can not be legally sold in Iran. It most likely came from a country in the Middle East. If it came from a Middle Eastern country where it is not banned by law, it would be disabled when the phone was taken out of that country to prevent its use in countries where it is not permitted.

Initialization integrated WebLogic server failed. Unexpected country code

I ran a JSF page from JDeveloper just after installation.
When integrated WebLogic server is intializing, I get the following error:
system doesn't find path
\Belgium not expected at this time
is there a work around?
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\fcampfor\AppData\Roaming\JDeveloper\system11.1.2.4.39.64.36.1\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
Het systeem kan het opgegeven pad niet vinden.
\Belgium niet verwacht op dit moment.
Process exited.
Edited by: user523117 on 23-mei-2013 4:50
Edited by: user523117 on 24-mei-2013 3:04
Edited by: user523117 on 24-mei-2013 3:05

Problem solved:
- uninstall JDeveloper (including integrated WebLogic server).
- change configuration setting (Windows 7) country code to US English
- I removed all registry entries having "Middleware" or "JDeveloper"
- Install jdeveloper again
- test => OK
- change country code back to Belgium (Dutch)
- test => OK

Caller identification country code

Is it possible to remove the country code from my caller id?
For example insteag of +44121xxxxxxx it would make more sense if it were 0121xxxxxxx

slimsmarty wrote:
Is it possible to remove the country code from my caller id?
I'm afraid not.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Generate java 3 digit ISO 3166-1 Numeric country code

Hi All
I am supposed to generate a 3 digit ISO 3166-1 Numeric country code as part of an ID.
I have got to know the Locale class which has methodsthat generate the 2 digit code but not the three digit code.
After googling for hours I am still not able to find such a method.
Please help me as I need to deliver the code.
Thnaks in advance...
Ishika

There are three relevant bugs filed for this.
6544471: LocaleISOData.java is incomplete and not up-to-date
This addresses missing 3 country codes:
GG - GUERNSEY
IM - ISLE OF MAN
JE - JERSEY
This is already fixed in JDK7, but has not been backported to JDK6 line yet.
6627549: ISO 3166 code addition: Saint Barthélemy and Saint Martin
This is for BL and MF, which have not been added yet.
There is a country code that has been removed from the ISO list, i.e., CS. We will be removing this for JDK7 (6786276), but not for JDK6 or prior releases, for the compatibility reason.
So the final count, 3+2-1 = 4, which matches your observation. There is no API to modify the list returned from that method, so you might want to specifically account for those country codes.
HTH,
Naoto

How to find out the user Country code in flex

Hi all,
I want to find out the country code, to load dynamic localization swfs.
example : my swf file name
en_US_res.swf
by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
Thanks!!

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Satellite L750D - Cannot register warranty due to country code

Unsure if this is an appropriate question BUT...
I am trying to register my L750D Notebook for warranty and it will not accept my country code.
I live in Australia so the country code is 61. I live in South Australia - code 8 and my phone number is 83xxxxxx.
So I have tried to put the code in as 61 then 8 then 83xxxxxx but it will not accept it.
Would anyone know what I am doing wrong?
I have also tried about 30 other ways of doing it?
Kind regards
Felicity,

Hi mate
Did you try to register the warranty on the right Toshiba page?
Please check this Toshiba Australia warranty registration webpage:
http://www.mytoshiba.com.au/support/warranty/statements
Please post feedback!

CUCM 8.6.2 Generating CSRs With Incorrect Country Code

Hi folks, I'm running CUCM 8.6.2.25900-8 on a single cluster (1x pub, 4x sub). My CA certs for the tomcat service are due to expire shortly so I've generated CSRs for all the servers and submitted them to our provider. All but one of the requests went through with no issues but one failed because the CSR specified a country code of 'US'. We are in the UK and the four other servers all generated CSRs specifying C=GB.
Examining the current tomcat cert or issuing "show web-security" on the command-line of the server who's CSR failed also show 'C=GB'
Looking at the 'set web-security' command it appears that I cannot change the country code.
Why is the server generating CSRs with 'C=US'?
How do I change this behaviour such that they are generated with 'C=GB' instead?

Surprisingly, it has made it all the way to 10.5(x) with the same info and the same error...
I did found a method to change it via root access, and you might not require root access, but I can't tell for sure as I would need to look at exactly what the contents of the file that TAC changes, but apparently it's just the platformConfig.xml that they need to change and reboot.
If that's the case, using the utils import config using pretty much all the same info, except the country, would end up with the same outcome.
Again, not 100% sure but theory says that should do the trick, you can run that thru TAC if you open the case and see what they think about it.

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

Facetime removes country code

Similar Messages

Maybe you are looking for