FaceTime sound drops half way through a conversation

why is it that the sound drops half way through a conversation and the other person can hear me but i can't hear them

Hi Kathshirls,
Thanks for visiting Apple Support Communities.
In addition to the article above, the steps in this article can help with troubleshooting your iPhone if you can't hear and can't be heard while on a call:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
All the best,
Jeremy

Similar Messages

  • My music quality drops half way through - wave file, is there a way to make an improvement

    My music sound quality drops half way through - its a wave file, is there a way to make a the other half as good as the first half?

    Firstly can you tell us what sort of drop in quality in you are experiencing? Is this music that you have recorded yourself using Audition or is it imported from somewhere else? Without knowing what has happened to it it is impossible to say if any improvement can be made.
    If it is audio that you have recorded and edited in Audition you must have done something to it to make it change half way through. You will probably need to go back a few steps in your editing process to recover the sound.

  • Iphone sound is on, but when typing sound stops half way through.

    What is wrong with my iphone, my sound is on, but i will be typing and  stops playing the sound half way through ?
    I have only had in 2 months 4s.
    help me please this is m second since my first got stolen

    Sound is on.
    Plays in headphones
    Wont play music out loud or anything other type of sound

  • FaceTime Mic Stops Half Way Through Conversation

    When halfway through a conversation using FaceTime for Mac, the mic will suddenly stop working my end even though no settings have been changed. Skype & other applications work fine, does anyone have an idea as to why this could be?

    The footage appears the same from the Sony.
    The full audio plays in the Organizer and from the clip in the project panel.  The waveform shows for the entire length of the clip in the timeline.
    I didn't see the blue progress bar you spoke about, but the program just went through the process of importing the clips and then the organizer opened.
    Thanks.

  • Audio cuts out half way through video after conversion.

    I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
    I've spliced together clips before without problem, using the same camera source.
    Thanks.
    Cheers

    I figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
    Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again).

  • When i publish the movie to youtube, the sound gets cut out half way through.  help?

    I'm trying to publish a short movie to youtube.  It plays fine in the editing screen, but when I publish it, half way through, the sound cuts out on the video.  There's still some background music that's playing, but the voices get cut out.  I've tried republishing it in a different size and the sound cuts out at the exact same place.  Any suggestions? 

    You can contact support and have them troubleshoot the songs for you.
    http://www.apple.com/support/itunes/contact/

  • Making simple Cross desolves at the end of still photo clips from my library. Not making a clean disolve beteen. Single frames from the previous clip are flashing half way through the desolve. Did both a drag and drop and insert disolve.

    Making simple cross desolves at the end of still photo clips from my library.
    Not making a clean disolve between clips.
    Single frames from the previous clip are flashing half way through the desolve.
    Did both a drag and drop and insert disolve.

    Making simple cross desolves at the end of still photo clips from my library.
    Not making a clean disolve between clips.
    Single frames from the previous clip are flashing half way through the desolve.
    Did both a drag and drop and insert disolve.

  • OneStep DVD lost of sound half way through the tape

    When transferring one of my mini dv's I completely lose all sound half way through the tape. This lost of sound also corresponds to a new scene in the tape. From then on all sound is lost. The following tape is done in the exact settings (surroundings and camera setting) but the sound is ok. FYI, I’m running at 16bit all the time. Can anybody help?
    Thanks
    Cubi
    iMac G5 20" iSight   Mac OS X (10.4.3)  

    Just import your tape into iMovie HD and send it to iDVD.

  • I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?

    I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?

    Could be a defective SIM.  Try a new one from your carrier.

  • Sound Cuts Out Half Way Through Clip

    I'm importing an AVI file into iMovie HD to edit it. There is nothing wrong with the file itself, there's sound the whole way through, but when I import it into iMovie the sound cuts out at a certain part. I've tried uploading it multiple times and every time the sound cuts out at the same part of the clip. I can't figure out what's wrong.

    Welcome to the discussions.
    AVI isn't a format. AVI is a container, just like MOV. These containers can contain video in any format (=codec) of the hundreds available. Which codec is YOUR video encoded with?
    http://en.wikipedia.org/wiki/Video_codec
    http://en.wikipedia.org/wiki/AudioVideoInterleave

  • After Quicktime dowloads, it freezes half way through.

    I made a QT movie (size 640x480, H 264, K frame 24, frame reorder: yes, D rate: 2.30 mbits, sound: IMA 4:1 mono, about 76MB).  It runs fine on my MacBook. I uploaded it to my website, it was then sent through an email and downloaded to another MacBook Air.  it looks clear and the sound is fine til half way through, then the screen freezes and the music stops, the little dot though still moves along the bottom of the control bar, as if it is still going. Tried downloading again and teh same thing happens in the same place. This happened with another video as well.
    Any ideas?

    Welcome to Apple Discussions BigMak
    This is likely not a preference issue, but just to be sure, when you deleted the preferences, did you delete all of the preference files as I detail in my user tip, AppleWorks has stopped working correctly?
    More likely this "freezing" (as opposed to crashing) is a problem with full Recent Items and/or AutoSave folders or a corrupt font. There are three articles in the User Tips Library dealing with Recent Items.
    Dale Gillard - AppleWorks slow? Spinning ball appears?
    Dale Gillard - Recent items not visible/updated
    Yvan Koenig - No More Recent Items
    The most frequent cause of AppleWorks quitting during start up is a corrupt font. In watching the AppleWorks start up window, do you see where it was when it crashed? If my guess is correct, it would be during "Building Font Menu." First, look for a font named Bauhaus 93. This font is installed by versions of Microsoft Office before Office 2004. The Bauhaus 93 with Office 2004 is not corrupt. If you don't find Bauhaus 93 you'll need to go through the trial & error of locating a corrupt font. Using the OS X Font Book is not reliable when it comes to finding problem fonts affecting AppleWorks.
    The trial & error method of corrupt font isolation involves moving all of the fonts from the various font folders to another folder (the Desktop is a good place) & then moving a few back at a time & trying to launch AppleWorks. When it crashes you will know the culprit is in the last bunch.
    Peggy

  • Audio doesn't match video because repeated half way through

    Hi guys,
    I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
    In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
    Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
    Video:   ABCDEF
    Audio:   ABCABC
    I have tried opening it in a different project and somehow it happens exactly at the same point.
    I am totally clueless of what it comes from and getting really frustrated!
    Any idea?
    Cheers
    Babs

    Hello, I'm new to using forums like this.  Is it appropriate for me to post that I'm having the same issue?  Also sounds similar to Audio doesn't match video because repeated half way through as well.
    My situation is:
    Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
    Multiple Nikon D7000 video clips I've taken play back fine except for the following clip.  In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video.  I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
    I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to.  I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV.  I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
    Any help would be greatly appreciated.  I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again.  This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
    Thanks for any help you can provide.  I don't really know where else to go to figure this out.
    Joel
    My Premier Elements Project settings are:
    Editing Mode: DSLR
    Timebase: 23.976frames/sec
    Video:
    Framesize: 1920 x 1080
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: No Fields (Progressive Scan)
    Display Format: 24fps Timecode
    Audio:
    Sampe Rate: 48000 Hz
    Output from MediaInfo
    General
    Complete name                            : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
    Format                                   : MPEG-4
    Format profile                           : QuickTime
    Codec ID                                 : qt 
    File size                                : 1.46 GiB
    Duration                                 : 10mn 32s
    Overall bit rate                         : 19.8 Mbps
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-15 03:24:05
    NCDT                                     : NCTG
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 2 frames
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 10mn 32s
    Bit rate                                 : 18.3 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 23.976 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.368
    Stream size                              : 1.35 GiB (92%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46
    Transfer characteristics                 : BT.470 System M
    Matrix coefficients                      : BT.601
    Audio
    ID                                       : 2
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, Sign                    : Signed
    Codec ID                                 : sowt
    Duration                                 : 10mn 32s
    Bit rate mode                            : Constant
    Bit rate                                 : 1 536 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 116 MiB (8%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46

  • Stutters and logging out half way through movies

    Hi all, At first I thought this was just me. I had created a couple of trailers in iMovie which played fine on everything but the AppleTV. That continuously dropped frames every second, turning smooth video into something that is jittery and unpleasant to watch.
    But now it did the same thing with The Girl Who Played With Fire which I rented last night. Up until that point, rented movies have always been fine.
    In addition, in both the last two films we have rented, the AppleTV has suddenly stopped playing the film at some point (about half ways through one and only 10 mins into the other) and dropped back to the menus.
    Why I don't know, but the film would not be showing as ready to play and investigating the settings would so that I had been logged out of iTunes. Once I log back into iTunes, I can then restart the film and everything seems to be fine after that.
    Any ideas?

    Hello Ellekell,
    I'd recommend deleting the movie, then redownloading it from the iTunes Store.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    If you're still having trouble after redownloading the movie, you may want to report the issue to the folks in our iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • HT204406 I turned on iTunes Match 8 days ago, but all it does it restart the syncing process again half way through - any ideas?

    So, 8 days ago we decided to subscribe to iTunes Match.  It's been trying to sync ever since (i.e. it gets half way through step 2 and then restarts the whole process again).  Any idea as to why it's doing this?  Any ideas as to what we can do to fix this?

    sounds like you may just want to re-match your library.
    easiest way to do so if it never finished it to turn iTunes match off, then back on (and add this computer). that will analyze your library once more and upload or match any songs that need to be.
    Store > Turn off iTunes Match
    then
    Store > Turn on iTunes Match

  • My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    Hi daveormond,
    I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
    Mac OS X: Gray screen appears during startup - Apple Support
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

Maybe you are looking for

  • Oracle 10G: Creation of a new scheduled job gives error

    When a new job is being created, it keeps giving this error. The job does not exist and has never been created. I have checked if such a job exists using EM and did not find one. Any help on this is really appreciated. Some entry is there in some tab

  • Computer was wiped, how do i re-establish my ipod library with my new one?

    Hello anybody out there... Due to a couple growing problems with my computer, i had to have it completely wiped and everything deleted off of it. I reinstalled itunes and have everything working fine again, but I'm not sure how to add the new songs i

  • Webi Report Schedule failing in BI Launchpad

    Hi, I am wondering if anyone has come across this error message when trying to schedule a webi report in BI Launchpad. Firstly, the webi report refreshes successfully in BI Launchpad. The source for the Webi report is an OLAP universe that was migrat

  • Java.lang.OutOfMemoryError: PermGen space in Weblogic 10.3

    Hi, I Installed OIM in Oracle Weblogic 10.3.When I try to execute the patch_weblogic.cmd ,I am getiing the "java.lang.OutOfMemoryError: PermGen space".I tried increasing the size in xlStartWLS.cmd file.But still the error exists.Any ide?.Following is

  • Add maximumsize icon to title bar in JDialog

    My question is how to add a maximumsize icon to the title bar of JDialog, i want to create a dialog that when user double-click the JDialog's title bar or click the maximumsize icon in the JDialog's title bar the dialog can be displayed as maximum si