FaceTime stopped working after installing AJA drivers

I need some help to figure out how to get Facetime working again in Lion 10.7.40. I installed some AJA LHi video card drivers and now my webcam/Facetime/Skype won't load. The programs either crashes during load or, in the case of Skype, when I try to select the webcam in Preferences. I have uninstalled the AJA drivers but it doesn't change anything. I can create another user on the same system and Facetime works fine. I've tried contact AJA support but have heard nothing back in the last 48 hours. One thing of interest is that PhotoBooth works fine with the Logitech webcam.
I'm familiar with navigating the Library folder but I don't really know what everything does so i'm trying to stay clear of performing any file surgery without some guidance.
Any help or advise is appreciated. Thanks.

HI,
I can tell you that the moving Pic seen in Photo Booth is produced by a different engine, as it were, to the one used in iChat and FaceTime.
iChat and FaceTime both use the viceroy.framework
In Snow Leopard this is Invoked by iChat Agent for iChat and IMAgent for the FaceTime Download.
In Lion both apps are linked in with IMAgent.
Basically it is s subset routine from Hard Drive/Sytem/Library/PrivateFrameworks/VideoConference.framework
There have been issues in the past with mAudio's various Firewire devices and their Firewire Drivers for those devices (often just out of step with the OS updates to be a complete nuisance.
10:34 PM Saturday; June 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

PS 6 beta stopped working - after installing my old tablet

PS 6 beta stopped working - after installing my old tablet
Just to let U know, everywhere else (GIMP,Paint etc) there is no problem,
also tablet is fully working and operational,
drivers are up to date,
PS 6 beta brign an error 01 .
Also say about contating support ...
How can I constact support when I Dont have a license or serial number etc..
since it ask me about it while trying to reach support.... pointless! mad!
? What now? should I trash my favorite tablet and buy some junk just because of this BUG?
or will it be solved somehow?
I do believe that nobody will even care about one human and none of programmers will update
database of this program for older tablets,,, but JSUT TO LET U KNOW - its not working.
and free software as GIMP is working just perfectly, and adobe **** is not even opening a program..

oh well, as I mentioned my tablet is old, ( but i thought that new version of photoshop will contain also some parts from old ones for compability, as U said its not working like that o.o ) is is Pentagram Duo Pen (USB)
   I uninstalled tablet drivers and adobe software and reinstalled again without tablet, now it's working so it was a driver that messed up all..
Oh, the error code nr was : 1
i also was suprised but this is what I got from photoshop in error message the rest of it was about contacting adobe.com/support ..blahblahblah
I am still not fully understanding how its possible that so well paid software is not compatble with my super old tablet while even stupid paint is..
I am sure it is complicated, however as U see I am not able to anything else but operate with mouse.. or switch to linux and practice in gimp..
if U wonna to take a look at the file of that driver i will post it here :
(more files on http://download.pentagram.eu/en/drivers/graphic_tablets/duopen_usb/DuoPen_USB_Win2K_XP.zip)
Cheers..
; Installation inf for Pentagram USB Tablet
; (c) Copyright 2000 Pentagram Pte Ltd
[Version]
Signature="$CHICAGO$"
Class=Mouse
;Class=USB
;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%MSFT%
DriverVer=08/05/1999
[SourceDisksNames]
1="Pentagram USB Tablet Installation Disk",,,
[SourceDisksFiles]
MGUSBTAB.sys = 1
MGUSBTAB.inf = 1
wintab32.dll=1
wtmgl.exe=1
wtdata=1
mgltab.cpl=1
[Manufacturer]
%MfgName%=ModelSection
[ModelSection]
%USB\VID_081A&PID_1000.DeviceDesc%=MGUSBTAB.Dev, USB\VID_081A&PID_1000
;[PreCopySection]
;HKR,,NoSetupUI,,1
[DestinationDirs]
MGUSBTAB.Files.Ext = 12,
MGUSBTAB.Files.Inf = 17,
MGUSBTAB.Copy             = 11,
; DIRID_SYSTEM
[MGUSBTAB.Dev]
CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
AddReg=MGUSBTAB.AddReg
[MGUSBTAB.Dev.NT]
CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
AddReg=MGUSBTAB.AddReg
[MGUSBTAB.Dev.NT.Services]
Addservice = MGUSBTAB, 0x00000002, MGUSBTAB.AddService
[MGUSBTAB.AddService]
DisplayName    = %MGUSBTABLET.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\MGUSBTAB.sys
LoadOrderGroup = Base
[MGUSBTAB.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,MGUSBTAB.sys
;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","MaximumTransferSize",0x1000 1,4096
;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","DebugLevel",0x10001,5
HKLM,%JX_REGISTRY_PATH%,"NumberOfButtons",0x00010003,3
HKLM,%JX_REGISTRY_PATH%,"SampleRate",0x00010003,100
HKLM,%JX_REGISTRY_PATH%,"x1",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"y1",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"x2",0x00010001,15240
HKLM,%JX_REGISTRY_PATH%,"y2",0x00010001,12700
HKLM,%JX_REGISTRY_PATH%,"tabletMode",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"xSens",0x00010001,32768
HKLM,%JX_REGISTRY_PATH%,"ySens",0x00010001,32768
HKLM,%JX_REGISTRY_PATH%,"clickThreshold",0x00010003,40
HKLM,%JX_REGISTRY_PATH%,"x1Phys",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"x2Phys",0x00010001,15240
HKLM,%JX_REGISTRY_PATH%,"y1Phys",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"y2Phys",0x00010001,12700
HKLM,%JX_REGISTRY_PATH%,"mappings",0x00000000,"01 02 04 00 00 00 00 00 "
HKLM,%JX_REGISTRY_PATH%,"parameter1",0x00000000,"µŇ¬šŤ–šŚß«žť“š‹Äß©šŤŚ–‘ßÎŃĎÉÄßąŤ’ž‹ĹßÉŇ ť†‹šßť–‘žŤ†"
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"wtmgl",0,"wtmgl.exe"
;for GUID
;HKLM,%JX_REGISTRY_PATH%,FriendlyName,,"Pentagram Serial Tablet"
[MGUSBTAB.Files.Ext]
MGUSBTAB.sys
[MGUSBTAB.Files.Inf]
MGUSBTAB.Inf
[MGUSBTAB.Copy]
wintab32.dll
wtmgl.exe
wtdata
mgltab.cpl
[Strings]
MSFT="Microsoft"
MfgName="Pentagram"
USB\VID_081A&PID_1000.DeviceDesc="Pentagram USB Tablet"
MGUSBTABLET.SvcDesc="USB Tablet driver"
JX_REGISTRY_PATH="System\CurrentControlSet\Services\mgltab\Parameters"

Autofill stopped working after installing latest OS Mountail Lion update Can anyone help? I've gone into preferences and

Autofill has stopped working after installing latest update to OS X Mountail Lion (10.8). Latest of many problems with this OS - wish I had never upgraded to it. Can anyone help?

Hi Eric, it is Safari but I thunk I've solved it by dragging the autofill into the safari toolbar and clicking on it when I want to use the fearture. Nothing else worked. this OS is a crock as far as I am concerned.

Generic PDF writer. Stopped working after installing Yosemite.

Generic PDF Writer stopped working after installing Yosemite. Can anyone help??

Yes, checked. The system is up to date.

My sound stopped working after installing Java

my sound stopped working after installing Java

Make sure Must is not selected in System Preferences > Sound
Might be corrupted sound preferences ...
Open the Finder.
From the Finder menu bar click Go > Go to Folder
Type or copy/paste: /Library/Preferences
Click Go then move the com.apple.soundpref.plist file from the Preferences folder to the Trash.

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS X

WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS.
MB used as email and surfing tool when on vacation. Worked fine for months. Installed the latest security patch (update) and WiFi quit working. Two days later (still on vacation) WiFi started working again and worked fine for the next 2 days.
Came home and formatted and reinstalled 10.8.5 and all was fine again. We are selling the MacBook and setup new user, everything worked fine.
The update came up again so I decided to install it and WiFi instantly stopped working after the restart.
Does anybody have any idea what is happening.
Thanks

Not really, although WiFi has been a longstanding problem for lots of people. I fix for some breaks others.
However, if you are trying to sell it, you need to revert it back to the OS that shipped with it. You cannot sell your copy of Mountain Lion with the Mac. It is only licensed to you.
You also need to include the system disks that came with the Mac. If it came with Leopard (10.5), and you have a Snow Leopard (10.6) disk, you can install that if you provide that disk also.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

3000 j115 A11 stopped working after installing new graphics card

I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
PS. I did take the asus card back out, so I'm not that lucky
PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
Message Edited by Lazlo420 on 06-27-2009 12:05 PM
Note from Moderator: Gave it a more descriptive subject.
Message Edited by JaneL on 06-28-2009 01:36 PM

I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
Thanks and good luck. Post back if you get to the bottom of it.

Facetime stopped working after update to ios7

After I updated to ios7 Facetime stopped woprking. I used the steps online and it still didn't work. Can anyone help me? I have an iphone 4.

Thanks PhilipRoy for your reply.
After putting phone in the freezer wrapped in kitchen towel to avoid moisture for 15 minutes. When turned on the wifi tab goes green and it identifies all available networks as normal,also accepts net work as normal for a little while, after about 10 minutes it shows as < Not Connected > WIFI tab is still green but no network is chosen of available. At this point if phone is powered off then upon turning on wifi tab is grayed out permanently, until frozen again. This proves that it is an heating issue with the product which was working fine until updated to ios7. My son has iphone 4s not updated to ios7, works fine and it is older then mine. Apple needs to own up to their mistake and sort this out.

Isight Stopped Working After Installing Quicktime Software Update

This afternoon when I logged into my Macbook, it automatically detected new software update for Quicktime. As always, I let the computer download and install the software. However, this time it created a lot of problems for me. First, I couldn't connect to my network (I use Airport Express) although the signal was strong. After reset modem, router and Airport, finally I could get on network. However, then I found out my Isight stopped working. The light on the right side of the built-in camera was always on (green). My Photo Booth screen appears green all the time. I no longer can use Skype video chat. Does anyone encounter the same problem? Can anyone help me out? I use Macbook, the operating system is OX 10.4.3. Thanks.

Welcome to Apple Discussions, Freepisces
I have all the latest updates on my Macs, and I have no problem at all.
If you applied the latest (7.4.1) QT update, your problem may be due to the fact that the System Requirements for QuickTime 7.4.1 for Tiger include Mac OS X 10.4.9 or later, and you show that you are using Mac OS X (10.4.3). You can check which QT version you have installed using the QuickTime Player > About QuickTime Player menu command.
If your QT version is an older one that is compatible with your Mac OS, and if you have not done so since you applied the QT update, repairing permissions may help you.
If the problem is somehow related to your iSight rather than to your QT software, Apple's How to Troubleshoot iSight may help you identify and fix your problem.
Unless you have a compelling reason for not doing so, you should consider updating to the latest version of Tiger (10.4.11). To find out what improvements you are missing by staying with 10.4.3, see some of the "About the Mac OS X 10.4.xx Update" documents for updates later than 10.4.3. A couple of examples are:
• About the Mac OS X 10.4.6 Update (combo) and
• About the Mac OS X 10.4.11 Update
If you are interested, other "About..." documents are linked in this search list.
Because System Requirements for the latest combo applicable to your MacBook, Mac OS X 10.4.11 Combo Update (Intel), are for Mac OS X 10.4.4 or later, you will need at least two steps to upgrade from your Mac OS X (10.4.3), so pay careful attention to the System Requirements of any updates you plan to apply.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Reminders stopped working after installing 7

Reminders stopped working when I installed the 7 upgrade. And the 7.1 did not help. Old lists evaporated, as did any list I added. But if I searched I could see they were still there. I went to the apple store and they shrugged their shoulders and said they had not seen it. They said use it in the cloud and all will be fine. Or wipe and reinstall, but all cookies will be lost, which is a huge pain.
I finally relented and enabled the cloud. It worked for one or two days then stopped again.
I tried buying similar apps, but don't like any of them.
I just want the reminders app to work, I use it to organize my day. It really ***** that Apple can't get such a simple thing to work, and my only option is to wipe and have to re-enter fifty passwords and user names.
Any suggestions?

Was that Win 7 update from Lenovo, or Microsoft? If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
The easiest way to do that is to first install ThinkVantage System Update and run it. It should download and install the other drivers and apps. I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff. Everything works.
Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Civilization V stopped working after installing build 10041

After installing build 10041, civilization V crashes when loading a game.
This worked perfectly just before the installation and fails after.
anybody else experiencing this issue? Any solutions?
My guess is that it is a directx issue but I can't be sure.
Just to prevent the questions being asked, it is a 100% legit version of Civilization installed over steam.
I tried reinstalling directx and reinstalling CIV V. Both failed. Drivers updated. Also failed.
Gal Ben Yair

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Epson Stylus TX210 stopped working after Epson Printer Drivers 2.1 update.

Hi! I recently bought an Epson Stylus TX210 All-In-One printer. I installed the drivers and software bundled in the included CD and I used it without any problems for 2 days, until the I was prompted to download Epson Printer Drivers 2.1. After the installation, I noticed that whenever I wanted to print anything, the "Print" blue glowing button in the print dialogue won't do anything and no matter how many times I pressed it, it didn't continue the printing process. I've tried everything to solve the issue, but so far anything has worked properly.
Thing I've done:
-Trashed the EPSON folder in HD\Library\Printers
-Repaired permissions.
-Reset printing system.
-Reinstall the CD drivers.
-Redownload the Epson Printer Drivers 2.1.
-Delete bundled software.
I've tried every possible combination of the steps above, and so far here's the state of my printed:
-I can print a Test Page directly using Option and Supplies opftion under the Printer and Fax settings.
-Scanner works.
-The "Print" button is no longer stuck, but every attempt to print fails. The printing status reads: "Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS /rastertoescpll failed"
-I'm printing by connecting the printer directly through the USB port.
Is there anything I can do? I would gladly appreciate any help!
Thanks in advance!

I would like to inform everyone that I've successfully solved my problem and now my printer works again!
The actual solution this this problem is a combination of various tips on this thread, but finally I found the exact steps and files needed.
1-If you installed drivers from the CD included in the printer, first uninstall them by opening each individual installer on the /Commons/ folder on the CD. After the installer prompts you for the password, select the "uninstall" option on the drop-down menu on the top left section of the window. Make sure you run the uninstall option -if possible- on all installers included on the CD.
2-Trash the HD\Library\Printers\EPSON folder and empty the Trash Can. There's going to be a couple of files being in use and you won't be able to delete them -yet-.
3-Reboot and disconnect your printer.
4-Empty the Trash Can again. The remaining files should be gone by now.
5-Go to System Preferences/Printer and Fax, right-click on the printer list and reset the printing system.
6-Go to http://www.epson.com.ph/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&ca tid=4&pid=1473 and download the Epson Stylus TX210 Driver for Mac OS X. -Note: I tried multiple versions of the TX210 drivers found online and this particular version was the only one that worked. It's interesting that the this for both the SX210 and TX210, and the installers that only contained the TX210 drivers didn't work-. If for some reason the page changes, the name of the file you're looking for is SX210Series652EMP2.dmg
7-Run the installer.
8-Connect your printer and go to System Preferences/Printer and Fax. The printer should be recognized and ready to print.
Thanks everybody for all the support!

HP Power Advisor has stopped working after installing latest updates

I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?

Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know!

FaceTime stopped working after installing AJA drivers

Similar Messages

Maybe you are looking for